vexpress: Check TC2 firmware support before defaulting to nonsec booting

The firmware on TC2 needs to be configured appropriately before booting
in nonsec mode will work as expected, so test for thi

vexpress: Check TC2 firmware support before defaulting to nonsec booting

The firmware on TC2 needs to be configured appropriately before booting
in nonsec mode will work as expected, so test for this and fall back to
sec mode if required.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>

show more ...

ARM: Rework and correct barrier definitions

As part of testing booting Linux kernels on Rockchip devices, it was
discovered by Ziyuan Xu and Sandy Patterson that we had multiple and for
some cases i

ARM: Rework and correct barrier definitions

As part of testing booting Linux kernels on Rockchip devices, it was
discovered by Ziyuan Xu and Sandy Patterson that we had multiple and for
some cases incomplete isb definitions. This was causing a failure to
boot of the Linux kernel.

In order to solve this problem as well as cover any corner cases that we
may also have had a number of changes are made in order to consolidate
things. First, <asm/barriers.h> now becomes the source of isb/dsb/dmb
definitions. This however introduces another complexity. Due to
needing to build SPL for 32bit tegra with -march=armv4 we need to borrow
the __LINUX_ARM_ARCH__ logic from the Linux Kernel in a more complete
form. Move this from arch/arm/lib/Makefile to arch/arm/Makefile and add
a comment about it. Now that we can always know what the target CPU is
capable off we can get always do the correct thing for the barrier. The
final part of this is that need to be consistent everywhere and call
isb()/dsb()/dmb() and NOT call ISB/DSB/DMB in some cases and the
function names in others.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Sandy Patterson <apatterson@sightlogix.com>
Reported-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Reported-by: Sandy Patterson <apatterson@sightlogix.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

arm/PSCI: Add support for creating ARMv7 PSCI version 1.0 DT node

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

arm/PSCI: Fixed the backward compatiblity issue

Appended the compatible strings of old version PSCI to the latest
version supported. And there are some psci functions' property must
be added to DT o

arm/PSCI: Fixed the backward compatiblity issue

Appended the compatible strings of old version PSCI to the latest
version supported. And there are some psci functions' property must
be added to DT only for psci version 0.1, including cpu_on, cpu_off,
cpu_suspend, migrate.

Note, ARMv8 Secure Firmware Framework doesn't support PSCI ver 0.1.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

arm/PSCI: Removed unused code

Identify the PSCI node only by its name, so removed the code finding
it by compatible string.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun

arm/PSCI: Removed unused code

Identify the PSCI node only by its name, so removed the code finding
it by compatible string.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

libfdt: Introduce new ARCH_FIXUP_FDT option

Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
U-Boot shouldn't update memory setup in DTB file.
One example of usage of this op

libfdt: Introduce new ARCH_FIXUP_FDT option

Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
U-Boot shouldn't update memory setup in DTB file.
One example of usage of this option is to boot OS with different memory
setup than U-Boot use.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

armv8: spl: Call board_init_r from crt0_64 in SPL

As part of the startup process for boards using the SPL, the
meaning of board_init_f changed such that it should return normally
rather than calling

armv8: spl: Call board_init_r from crt0_64 in SPL

As part of the startup process for boards using the SPL, the
meaning of board_init_f changed such that it should return normally
rather than calling board_init_r directly. (see
db910353a126d84fe8dff7a694ea792f50fcfb6a )
This was fixed in 32-bit arm, but broke when SPL was added to
64 bit arm. This fixes crt0_64 so that it calls board_init_r
during the SPL and removes the direct call from board_init_f
from the arm SPL example.

Signed-off-by: Jeremy Hunt <Jeremy.Hunt@DEShawResearch.com>

Acked-by: Simon Glass <sjg@chromium.org>

show more ...

spl: zImage support in Falcon mode

Other payload than uImage is currently considered to be raw U-Boot
image. Check also for zImage in Falcon mode.

Signed-off-by: Ladislav Michl <ladis@linux-mips.or

spl: zImage support in Falcon mode

Other payload than uImage is currently considered to be raw U-Boot
image. Check also for zImage in Falcon mode.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

spl: Fix compilation warnings for arm64

Make code 64bit aware.

Warnings:
+../arch/arm/lib/spl.c: In function ‘jump_to_image_linux’:
+../arch/arm/lib/spl.c:63:3: warning: cast to pointer from intege

spl: Fix compilation warnings for arm64

Make code 64bit aware.

Warnings:
+../arch/arm/lib/spl.c: In function ‘jump_to_image_linux’:
+../arch/arm/lib/spl.c:63:3: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
+../common/spl/spl_fat.c: In function ‘spl_load_image_fat’:
+../common/spl/spl_fat.c:91:33: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
arch/arm/cpu/armv8/Makefile
arch/arm/lib/bootm-fdt.c

ARMv8/PSCI: Fixup the device tree for PSCI

Set the enable-method in the cpu node to PSCI, and create device
node for PSCI, when PSCI was enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

ARMv8/PSCI: Fixup the device tree for PSCI

Set the enable-method in the cpu node to PSCI, and create device
node for PSCI, when PSCI was enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of http://git.denx.de/u-boot-sunxi

ARM: Add an empty secure stack section

Until now we've been using memory beyond psci_text_end as stack space
for the secure monitor or PSCI implementation, even if space was not
allocated for it.

T

ARM: Add an empty secure stack section

Until now we've been using memory beyond psci_text_end as stack space
for the secure monitor or PSCI implementation, even if space was not
allocated for it.

This was partially fixed in ("ARM: allocate extra space for PSCI stack
in secure section during link phase"). However, calculating stack space
from psci_text_end in one place, while allocating the space in another
is error prone.

This patch adds a separate empty secure stack section, with space for
CONFIG_ARMV7_PSCI_NR_CPUS stacks, each 1 KB. There's also
__secure_stack_start and __secure_stack_end symbols. The linker script
handles calculating the correct VMAs for the stack section. For
platforms that relocate/copy the secure monitor before using it, the
space is not allocated in the executable, saving space.

For platforms that do not define CONFIG_ARMV7_PSCI_NR_CPUS, a whole page
of stack space for 4 CPUs is allocated, matching the previous behavior.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

arm: Show cache warnings in U-Boot proper only

Avoid bloating the SPL image size.

Signed-off-by: Simon Glass <sjg@chromium.org>

arm: Move check_cache_range() into a common place

This code is common, so move it into a common file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

arm64: add better and more generic spin-table support

There are two enable methods supported by ARM64 Linux; psci and
spin-table. The latter is simpler and helpful for quick SoC bring
up. My main

arm64: add better and more generic spin-table support

There are two enable methods supported by ARM64 Linux; psci and
spin-table. The latter is simpler and helpful for quick SoC bring
up. My main motivation for this patch is to improve the spin-table
support, which allows us to boot an ARMv8 system without the ARM
Trusted Firmware.

Currently, we have multi-entry code in arch/arm/cpu/armv8/start.S
and the spin-table is supported in a really ad-hoc way, and I see
some problems:

- We must hard-code CPU_RELEASE_ADDR so that it matches the
"cpu-release-addr" property in the DT that comes from the
kernel tree.

- The Documentation/arm64/booting.txt in Linux requires that
the release address must be zero-initialized, but it is not
cared by the common code in U-Boot. We must do it in a board
function.

- There is no systematic way to protect the spin-table code from
the kernel. We are supposed to do it in a board specific manner,
but it is difficult to predict where the spin-table code will be
located after the relocation. So, it also makes difficult to
hard-code /memreserve/ in the DT of the kernel.

So, here is a patch to solve those problems; the DT is run-time
modified to reserve the spin-table code (+ cpu-release-addr).
Also, the "cpu-release-addr" property is set to an appropriate
address after the relocation, which means we no longer need the
hard-coded CPU_RELEASE_ADDR.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

ARM: move #ifdef to match the error handling code

Match the #ifdef ... #endif and the code,

ret = do_something();
if (ret)
return ret;

This will make it easier to add more #ifdef'

ARM: move #ifdef to match the error handling code

Match the #ifdef ... #endif and the code,

ret = do_something();
if (ret)
return ret;

This will make it easier to add more #ifdef'ed code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...