Merge git://git.denx.de/u-boot-fsl-qoriq

armv8: ls2080ardb: Add LS2081ARDB board support

LS2081ARDB board is similar to LS2080ARDB board with few differences
It hosts LS2081A SoC
Default boot source is QSPI-boot
It does not have IFC int

armv8: ls2080ardb: Add LS2081ARDB board support

LS2081ARDB board is similar to LS2080ARDB board with few differences
It hosts LS2081A SoC
Default boot source is QSPI-boot
It does not have IFC interface
RTC and QSPI flash device are different
It provides QIXIS access via I2C

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8: ls2080ardb: Add QSPI-boot support

QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC.
LS2088ARDB RevF Board has limitation that QIXIS can not be accessed.
CONFIG_FSL_QIXIS is no

armv8: ls2080ardb: Add QSPI-boot support

QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC.
LS2088ARDB RevF Board has limitation that QIXIS can not be accessed.
CONFIG_FSL_QIXIS is not enabled.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

ARM: dts: am335x-evm: disable mmc3

SDIO is not supported in u-boot, there is no point in enabling mmc3.
For this purpose, add u-boot specific dtsi that this will be included
automatically while buil

ARM: dts: am335x-evm: disable mmc3

SDIO is not supported in u-boot, there is no point in enabling mmc3.
For this purpose, add u-boot specific dtsi that this will be included
automatically while building the dtb.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

arm: dts: Add dts and dtsi for Arria 10

Device tree files for Arria 10

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arm: dts: imx7d-sdb: add usdhc support

Add usdhc support

Signed-off-by: Peng Fan <peng.fan@nxp.com>

arm: dts: imx7d-sdb: add i2c support

Add i2c support.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb: add regulator node for usb and mmc

Add regulator node for usb and mmc.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb: add spi gpio node

Add spi gpio node for 74LV595.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7d-sdb add basic dts

Add basic dts for i.MX7D-SDB board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

arm: dts: imx7: sync with Linux

Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'").

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefano Babic

arm: dts: imx7: sync with Linux

Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'").

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>

show more ...

ARM: dts: uniphier: sync DT with Linux

Fix the following DTC warnings:
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/ethernet@00000000 simple-bus unit address format

ARM: dts: uniphier: sync DT with Linux

Fix the following DTC warnings:
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/ethernet@00000000 simple-bus unit address format error, expected "0"
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/uart@000b0000 simple-bus unit address format error, expected "b0000"
Warning (simple_bus_reg): Node /soc/smpctrl@59800000 simple-bus unit address format error, expected "59801000"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

rockchip: dts: evb_rk3288: Add mipi display support

Add mipi dsi configuration for evb-rk3288 device tree.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.o

rockchip: dts: evb_rk3288: Add mipi display support

Add mipi dsi configuration for evb-rk3288 device tree.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: dts: Add mipi dsi support for rk3399

Add dts config for mipi display, include vop, mipi controller, panel, backlight
. And Enable rk808 for lcd_3v3 in another patch.

Signed-off-by: Eric G

rockchip: dts: Add mipi dsi support for rk3399

Add dts config for mipi display, include vop, mipi controller, panel, backlight
. And Enable rk808 for lcd_3v3 in another patch.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

rockchip: tinker: set ethaddr in late init

Set ethernet mac address in late init for Tinker Board,
prevents getting a random mac address each boot.

Read mac address from eeprom, first 6 bytes from

rockchip: tinker: set ethaddr in late init

Set ethernet mac address in late init for Tinker Board,
prevents getting a random mac address each boot.

Read mac address from eeprom, first 6 bytes from m24c08@50.
Same as /etc/init.d/rockchip.sh on Tinker OS.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: dts: add rk3399-firefly dts

Firefly-rk3399 is a bord from T-Firefly, you can find detail about
it here:
http://en.t-firefly.com/en/firenow/Firefly_RK3399/

This patch add basic node for th

rockchip: dts: add rk3399-firefly dts

Firefly-rk3399 is a bord from T-Firefly, you can find detail about
it here:
http://en.t-firefly.com/en/firenow/Firefly_RK3399/

This patch add basic node for the board and make it able to bring
up.

Peripheral/interfaces on board:
- usb hub which connect to ehci controller;
- UART2 debug
- eMMC
- PCIe
- USB 3.0 HOST, type-C port
- sdio, sd-card
- HDMI
- Ethernet
- OPTICAL
- WiFi/BT
- MIPI CSI/DSI
- IR
- EDP/DP

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: dts: rk3399: sync with kernel dts

The kernel dts has update a lot since the first time we commit rk3399.dtsi,
sync with kernel for further development.

Signed-off-by: Kever Yang <kever.ya

rockchip: dts: rk3399: sync with kernel dts

The kernel dts has update a lot since the first time we commit rk3399.dtsi,
sync with kernel for further development.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: dts: evb-rk3399: add gmac support

Enable gmac for evb-rk3399.

Change-Id: I85e35667e08e22e38577e63eb0e65731fc9c69b6
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: dts: evb-rk3399: correct pwm3 polarity

The pwm3 on evb-rk3399 is used for pwm regulator, need to invert
the polarity to make it work correctly.

Signed-off-by: Kever Yang <kever.yang@rock-

rockchip: dts: evb-rk3399: correct pwm3 polarity

The pwm3 on evb-rk3399 is used for pwm regulator, need to invert
the polarity to make it work correctly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: dts: rk3399-puma: Add DDR3-1600 timings and use for Puma

With the validation done for DDR3-1600 (i.e. 800 MHz bus clock), we
add the timings (rk3399-sdram-ddr3-1600.dtsi) and change rk3399

rockchip: dts: rk3399-puma: Add DDR3-1600 timings and use for Puma

With the validation done for DDR3-1600 (i.e. 800 MHz bus clock), we
add the timings (rk3399-sdram-ddr3-1600.dtsi) and change rk3399-puma.dts
to use these by default.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
Drop blank line at end of file:
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

rockchip: dts: Clean up graffiti in rk3399-sdram-ddr3-1333.dtsi

The DDR3-1333 timings for the RK3399-Q7 (Puma) has some unintended
left-over comments in them. This change cleans the file up.

Signed

rockchip: dts: Clean up graffiti in rk3399-sdram-ddr3-1333.dtsi

The DDR3-1333 timings for the RK3399-Q7 (Puma) has some unintended
left-over comments in them. This change cleans the file up.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

omap3_logic: Add Device Tree Support and more DM drivers

This patch also removes all the excessive code for NS16550 intiailization
as the device tree can do that now. This also adds DM_I2C and DM_M

omap3_logic: Add Device Tree Support and more DM drivers

This patch also removes all the excessive code for NS16550 intiailization
as the device tree can do that now. This also adds DM_I2C and DM_MMC
since the overlying drivers have the built-in support already. The
corresponding include/config/omap3_logic.h also reduced in size
due to the new device tree support.

Signed-off-by: Adam Ford <aford173@gmail.com>

Changes in V2:
Retain Auto-detect ability between SOM-LV and Torpedo
Split this off from the device sub submissions

show more ...

ARM: DTS: Add Logic PD DM3730 Torpedo Device Tree

Previous commit has this combined with SOM-LV. This commit has only
the Torpedo Device Tree.

The device trees were sync'd with 4.9.y stable with t

ARM: DTS: Add Logic PD DM3730 Torpedo Device Tree

Previous commit has this combined with SOM-LV. This commit has only
the Torpedo Device Tree.

The device trees were sync'd with 4.9.y stable with two changes:
disable mmc2 and stdout-path = &uart1. Both of those two changes
will be submitted to the linux-omap list

Signed-off-by: Adam Ford <aford173@gmail.com>

Changes in V2:
Split device tree from other board

show more ...