rockchip: rk3188: add timer3 node

Add dts node for timer3.

Change-Id: I0af3f4e2fea26ceda82566846db15ec2337da43e
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: dts: rk3308: adjust emmc io request

make nandc io resource available instead of controlling by pinctrl

Change-Id: I40c04e3f71223710c4f23649b45ef12b572ee0a8
Signed-off-by: Dingqiang Lin <j

rockchip: dts: rk3308: adjust emmc io request

make nandc io resource available instead of controlling by pinctrl

Change-Id: I40c04e3f71223710c4f23649b45ef12b572ee0a8
Signed-off-by: Dingqiang Lin <jon.lin@rock-chips.com>

show more ...

rockchip: dts: rk3308: enable nandc node

Change-Id: I20792b674f79d2244ced3c90568cc124c7284094
Signed-off-by: Dingqiang Lin <jon.lin@rock-chips.com>

drm/rockchip: vop: add support rk3308 vop

Change-Id: I067ac3f95163dd678317a11ffad7a7d85225c9ee
Signed-off-by: Sandy Huang <hjc@rock-chips.com>

arm: rockchip: rk3308: add nandc node for rk3308

Change-Id: I71d4205f683141f41a3ecf4fac23b8bc5097dd74
Signed-off-by: Dingqiang Lin <jon.lin@rock-chips.com>

arm: rockchip: rk3308: set u-boot,dm-pre-reloc for emmc and cru

We use dt-spl.dtb for mmc_initialize to load dtb from kernel when
CONFIG_USING_KERNEL_DTB is enabled, so set emmc as u-boot,dm-pre-rel

arm: rockchip: rk3308: set u-boot,dm-pre-reloc for emmc and cru

We use dt-spl.dtb for mmc_initialize to load dtb from kernel when
CONFIG_USING_KERNEL_DTB is enabled, so set emmc as u-boot,dm-pre-reloc
to make sure it will builtin dt-spl.dtb.

As emmc driver depends on cru, so also set cru as u-boot,dm-pre-reloc here.

Change-Id: Ia43d1a5ff2b9f75a28d18136d9d9185659a6fbe4
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

show more ...

rockchip: rk3036: Add some devices with dm-pre-reloc property

Enable cru, emmc, dmc devices' pre-relocate property for usage.

Change-Id: I297488f90f73f012feeb9e9aea3fb2e955b9ec0a
Signed-off-by: Dav

rockchip: rk3036: Add some devices with dm-pre-reloc property

Enable cru, emmc, dmc devices' pre-relocate property for usage.

Change-Id: I297488f90f73f012feeb9e9aea3fb2e955b9ec0a
Signed-off-by: David Wu <david.wu@rock-chips.com>

show more ...

arm: dts: rk3308: set u-boot,dm-pre-reloc for uart2

We use dt-spl.dtb for serial_init when CONFIG_USING_KERNEL_DTB
is enabled, so set the debug console uart2 on RK3308 EVB
as u-boot,dm-pre-reloc to

arm: dts: rk3308: set u-boot,dm-pre-reloc for uart2

We use dt-spl.dtb for serial_init when CONFIG_USING_KERNEL_DTB
is enabled, so set the debug console uart2 on RK3308 EVB
as u-boot,dm-pre-reloc to make sure it will builtin dt-spl.dtb.

Also move it from board dts to board-u-boot.dtsi, as it's u-boot
specific.

Change-Id: I088f7e20bb91cd3f1337b099dfccdb76fccabf1c
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

show more ...

arm: dts: rockchip: Add recovery key support for rk3308-evb

According to the hardware, the recovery key is conected to
the saradc channel0.

Change-Id: I9a1c2c49567da612b627f54ef84fbbf9be739b95
Sign

arm: dts: rockchip: Add recovery key support for rk3308-evb

According to the hardware, the recovery key is conected to
the saradc channel0.

Change-Id: I9a1c2c49567da612b627f54ef84fbbf9be739b95
Signed-off-by: David Wu <david.wu@rock-chips.com>

show more ...

arm: dts: rockchip: enable pwm regulator for rk3308 evb

RK3308 EVB uses pwm0 modulates the arm core voltage, so
enable pwm regulator here.

Change-Id: I8e2b88b4d947fe40835952eb2278cecbf64d293e
Signe

arm: dts: rockchip: enable pwm regulator for rk3308 evb

RK3308 EVB uses pwm0 modulates the arm core voltage, so
enable pwm regulator here.

Change-Id: I8e2b88b4d947fe40835952eb2278cecbf64d293e
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

show more ...

arm: dts: rockchip: add pwm dt node for rk3308

Add pwm device tree node for rk3308 SOC.

Change-Id: If8342b81330cfd27f3316e092e1bd2a9b459631e
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

arm: rockchip: rk3308: add DT of usb controller and enable usb

Add DT of DWC2 EHCI and OHCI controller and enable them.

Change-Id: Iedeeebe33f5f3e5616a43fb376e264cc2c46e40e
Signed-off-by: Meng Dong

arm: rockchip: rk3308: add DT of usb controller and enable usb

Add DT of DWC2 EHCI and OHCI controller and enable them.

Change-Id: Iedeeebe33f5f3e5616a43fb376e264cc2c46e40e
Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>

show more ...

arm: rockchip: rk3308: add core dtsi

Sync these files from Linux kernel.

Change-Id: I33432a84090d4f96ba932f30a3b4f0101c5a889d
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

pwm: rockchip: Do pwm pinctrl setting after pwm enabled

If the PWM pinctrl uses default state, the iomux setting will
be done at probe, the PWM may not be enabled at this moment.
It will make PWM in

pwm: rockchip: Do pwm pinctrl setting after pwm enabled

If the PWM pinctrl uses default state, the iomux setting will
be done at probe, the PWM may not be enabled at this moment.
It will make PWM into an intermediate state, destroy the default
hardware state, the PWM is not ready for work yet. So it is better
for doing PWM pinctrl setting after PWM enabled.

Change-Id: I8b700a07083b9a6798303fc5a5ed9f29eb42c47e
Signed-off-by: David Wu <david.wu@rock-chips.com>

show more ...

rockchip: dts: rk3326-evb: fix typo "RK3126" -> "RK3326"

Change-Id: I75afe0e718f1589d758d11f326526d505aef4fd9
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

rockchip: dts: rk3328: enable uart rx pull up

Change-Id: I85653ed9d52865250703ff559e3da67f0cec68ee
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>

rockchip: add evb-rk3326 support

Change-Id: Ic224db95452c9d2e6108dc93ec81018a6718f607
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

dts: rockchip: Add backlight support for px30-evb

The backlight uses the pwm1.

Change-Id: Ic546c82c075210d7c85d99f99f51406729db3146
Signed-off-by: David Wu <david.wu@rock-chips.com>

ARM: dts: rk3288: Remove unused LCDC clock assigned

The LCDC assigned rate is 0, it will make boot error,
error log:"pll_para_config: the frequency can not be
0 Hz". Remove them, and the lcdc drive

ARM: dts: rk3288: Remove unused LCDC clock assigned

The LCDC assigned rate is 0, it will make boot error,
error log:"pll_para_config: the frequency can not be
0 Hz". Remove them, and the lcdc driver will do the
correct clock rate setting.

Change-Id: Ic189f6747e36a2f4083f81d9db899a9f44fe0936
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb

Add rk3328-evb gmac support.

Change-Id: I1f6b33c27fd12c2039e9054246bb455095bd83ac
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by

rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb

Add rk3328-evb gmac support.

Change-Id: I1f6b33c27fd12c2039e9054246bb455095bd83ac
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

rockchip: dts: rk3328: Add gmac2io support

Add basic dts configuration for rk3328 gmac2io.

Change-Id: I9f84d5dcd06966f11746aab4cdc241e9ceb27594
Signed-off-by: David Wu <david.wu@rock-chips.com>
Ack

rockchip: dts: rk3328: Add gmac2io support

Add basic dts configuration for rk3328 gmac2io.

Change-Id: I9f84d5dcd06966f11746aab4cdc241e9ceb27594
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality

Give the mac controller the correct tx-delay and rx-delay value
for the rgmii mode transmission. If they are not matc

rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality

Give the mac controller the correct tx-delay and rx-delay value
for the rgmii mode transmission. If they are not matched, there
would be Ethernet packets lost, the net feature may not work.

Change-Id: I4ff6bd47fe75ff6b480de45df2e0e4e611e3950d
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

ARM: dts: rockchip: enable usb-phy for px30-evb

This change enable usb-phy support for px30-evb board.

Change-Id: I3200cd4b3988e84927ad2af274e7be78ff498dec
Signed-off-by: Frank Wang <frank.wang@roc

ARM: dts: rockchip: enable usb-phy for px30-evb

This change enable usb-phy support for px30-evb board.

Change-Id: I3200cd4b3988e84927ad2af274e7be78ff498dec
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

show more ...

rockchip: dts: px30: enable nandc in pre-reloc

Change-Id: I78224188bc2a54a5a0fc11d2c002f4600e6a8d9c
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

rockchip: dts: px30: enable cru in pre-relocate

We need cru in pre-relocate for serial/mmc driver.

Change-Id: I59eb8c27a9033838a52079e27c133c5b3d48c367
Signed-off-by: Kever Yang <kever.yang@rock-ch

rockchip: dts: px30: enable cru in pre-relocate

We need cru in pre-relocate for serial/mmc driver.

Change-Id: I59eb8c27a9033838a52079e27c133c5b3d48c367
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...