History log of /rk3399_rockchip-uboot/arch/arm/dts/socfpga_cyclone5_socrates.dts (Results 1 – 21 of 21)
Revision Date Author Comments
# 52b1eaf9 17-May-2016 Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot


# 15e8cb70 07-May-2016 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-socfpga


# 268da813 27-Apr-2016 Marek Vasut <marex@denx.de>

ARM: socfpga: Disable USB OC protection on SoCrates

This is mandatory, otherwise the USB does not work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Dinh Nguyen <din

ARM: socfpga: Disable USB OC protection on SoCrates

This is mandatory, otherwise the USB does not work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>

show more ...


# ec3ab3f9 20-Apr-2016 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-socfpga


# 43809cfa 18-Apr-2016 Stefan Roese <sr@denx.de>

arm: socfpga: socrates: Add eth0 alias to enable ethernet

This enables full ethernet usage, including U-Boot to write the board
specific MAC address (ethaddr) into the DT blob before passing it to
L

arm: socfpga: socrates: Add eth0 alias to enable ethernet

This enables full ethernet usage, including U-Boot to write the board
specific MAC address (ethaddr) into the DT blob before passing it to
Linux.

Without this, the ethaddr is not detected in U-Boot at all, resulting
in this error upon bootup:

...
Model: EBV SOCrates
Net:
Error: ethernet@ff702000 address not set.
No ethernet found.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

show more ...


# 34059d8f 20-Dec-2015 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-socfpga


# b5a5d2bd 05-Dec-2015 Marek Vasut <marex@denx.de>

arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead

arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>

show more ...


# 5d8546ef 05-Dec-2015 Marek Vasut <marex@denx.de>

arm: socfpga: socrates: Add missing PHY skew config

Add missing KSZ9021 PHY skew configuration for the EBV socrates board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershb

arm: socfpga: socrates: Add missing PHY skew config

Add missing KSZ9021 PHY skew configuration for the EBV socrates board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...


# 2a8696df 30-Nov-2015 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-socfpga


# 856b30da 23-Nov-2015 Marek Vasut <marex@denx.de>

arm: socfpga: Repair SoCrates board

This board was constantly parasiting on the CV SoCDK, so split it
into it's own separate directory. Moreover, the board config was
missing important bits, like si

arm: socfpga: Repair SoCrates board

This board was constantly parasiting on the CV SoCDK, so split it
into it's own separate directory. Moreover, the board config was
missing important bits, like simple-bus support in SPL, the DRAM
configuration was incorrect and the DTS was also missing the pre
reloc bits.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Jan Viktorin <viktorin@rehivetech.com>

show more ...


# c851a245 24-Aug-2015 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-socfpga

Conflicts:
configs/socfpga_arria5_defconfig
configs/socfpga_cyclone5_defconfig
configs/socfpga_socrates_defconfig

Merged these by hand and re-ran savedefco

Merge git://git.denx.de/u-boot-socfpga

Conflicts:
configs/socfpga_arria5_defconfig
configs/socfpga_cyclone5_defconfig
configs/socfpga_socrates_defconfig

Merged these by hand and re-ran savedefconfig on them.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...


# c2624240 03-Aug-2015 Marek Vasut <marex@denx.de>

arm: socfpga: Do not enable gmac1 in Cyclone V dtsi

The GMAC which is enabled is purely board property, so do not enable
arbitrary GMAC in DT include files. Same goes for PHY mode, which is
again a

arm: socfpga: Do not enable gmac1 in Cyclone V dtsi

The GMAC which is enabled is purely board property, so do not enable
arbitrary GMAC in DT include files. Same goes for PHY mode, which is
again a board property. The CycloneV SoCDK does this correctly, but
SoCrates doesn't. This bug never manifested itself though, since all
the boards ever used the GMAC1 . This bug manifests itself only on
boards that utilise GMAC0.

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...


# afe13993 02-Aug-2015 Marek Vasut <marex@denx.de>

arm: socfpga: Make the DT mmc node consistent

The socfpga_cyclone5.dtsi has an mmc0 node, socrates has mmc node.
This makes aliases not very usable, so make everything into mmc0.
Moreover, zap the u

arm: socfpga: Make the DT mmc node consistent

The socfpga_cyclone5.dtsi has an mmc0 node, socrates has mmc node.
This makes aliases not very usable, so make everything into mmc0.
Moreover, zap the useless mmc alias while at this.

Signed-off-by: Marek Vasut <marex@denx.de>

show more ...


# b09b72d8 21-Jul-2015 Marek Vasut <marex@denx.de>

arm: dts: socfpga: Fix SPI aliases

The SPI aliases are completely wrong. First, they point to non-existing
/spi@.* nodes instead of the correct /soc/spi@.* nodes. Second, the use
ad-hoc string inste

arm: dts: socfpga: Fix SPI aliases

The SPI aliases are completely wrong. First, they point to non-existing
/spi@.* nodes instead of the correct /soc/spi@.* nodes. Second, the use
ad-hoc string instead of a handle. Furthermore, they are copied multiple
times in each board DTS.

So fix it such that we move these into socfpga.dtsi and make them use
the usual handles.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>

show more ...


# 3bfbf32b 16-Dec-2014 Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-socfpga


# 36916404 07-Nov-2014 Stefan Roese <sr@denx.de>

arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probing

Without this alias, DM based probing does not work. So lets add this
alias to get the bus numbering correct for the Designware S

arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probing

Without this alias, DM based probing does not work. So lets add this
alias to get the bus numbering correct for the Designware SPI
controllers.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>

show more ...


# 60896653 07-Nov-2014 Stefan Roese <sr@denx.de>

arm: socfpga: dts: Add spi0 alias for Cadence QSPI driver

Without this alias, DM based probing does not work. So lets add this
alias to get the bus numbering correct.

Signed-off-by: Stefan Roese <s

arm: socfpga: dts: Add spi0 alias for Cadence QSPI driver

Without this alias, DM based probing does not work. So lets add this
alias to get the bus numbering correct.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

show more ...


# 881f6a44 07-Nov-2014 Stefan Roese <sr@denx.de>

arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi

This DT node is taken from the Rocketboard.org Linux repsitory. And
is needed to enable (configure) the Cadence DM SPI driver.

Signed-off

arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi

This DT node is taken from the Rocketboard.org Linux repsitory. And
is needed to enable (configure) the Cadence DM SPI driver.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

show more ...


# 5bf1f1ed 14-Nov-2014 Stefan Roese <sr@denx.de>

arm: socfpga: dts: Move to SPDX license identifiers

The socfpga dts files are copied from the Rocketboards.org repository.
In U-Boot we usually replace the full-blown license header text with
the SP

arm: socfpga: dts: Move to SPDX license identifiers

The socfpga dts files are copied from the Rocketboards.org repository.
In U-Boot we usually replace the full-blown license header text with
the SPDX license identifiers. Lets do this for these new dts files
as well.

I just forgot to do this while adding the DT support for socfpga.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>

show more ...


# c88eaea0 11-Nov-2014 Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-socfpga


# 51c580c6 07-Nov-2014 Stefan Roese <sr@denx.de>

arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target

This patch includes the latest DT sources for socfpga from the current
Linux kernel. And enables CONFIG_OF_CONTROL for the ne

arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target

This patch includes the latest DT sources for socfpga from the current
Linux kernel. And enables CONFIG_OF_CONTROL for the new build target
"socfpga_socrates" (the EBV SoCrates board) to make use of this new DT
support.

Until this patch, the only SoCFPGA U-Boot target in mainline is
"socfpga_cyclone5". This build target is not (yet) changed to support
DT. So nothing changes for this target. Even though the long-term
goal should be to move all SoCFPGA targets over to DT.

One of the reasons to enable DT support in SoCFPGA is, that I need to
support multiple different SPI controllers for this platform. This is
the QSPI Cadence controller and the Designware SPI master controller.
Both are implemented in the SoCFPGA. And enabling both controllers is
only possible by using the new driver model (DM). The DM SPI code
only supports DT based probing. So it was easier to move SoCFPGA to
DT than to add the (deprecated) platform-data based probing to the
DM SPI suport.

Note that the image with the dtb embedded is u-boot-dtb.img. This needs
to be used now for those DT enabled boards instead of u-boot.img.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Pavel Machek <pavel@denx.de>
Cc: Simon Glass <sjg@chromium.org>

show more ...