Merge branch 'next-dev' into thunder-boot

UPSTREAM: armv8: ls1043a/ls2080a: check SoC by device ID

Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities

UPSTREAM: armv8: ls1043a/ls2080a: check SoC by device ID

Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Change-Id: I7be6b46fc17aa7f7a3a40677de0c18c9dd095c52
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit a8f33034f2ed029dd04aae4cfdf11bf1f13a03a2)

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
include/configs/ls1046aqds.h
include/configs/ls1046ardb.h

armv8: Remove duplicate definition for IH_ARCH_ARM and IH_ARCH_ARM64

The duplicate definitions for IH_ARCH_ARM and IH_ARCH_ARM64 are removed.
The definitions in <image.h> are used.

According to thi

armv8: Remove duplicate definition for IH_ARCH_ARM and IH_ARCH_ARM64

The duplicate definitions for IH_ARCH_ARM and IH_ARCH_ARM64 are removed.
The definitions in <image.h> are used.

According to this modification, the comparison between os arch and cpu
arch is done in C programming instead of ASM programming.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

armv8: layerscape: Make U-Boot EL2 safe

When U-Boot boots from EL2, skip some lowlevel init code requiring
EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These
initialization tasks are carrie

armv8: layerscape: Make U-Boot EL2 safe

When U-Boot boots from EL2, skip some lowlevel init code requiring
EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These
initialization tasks are carried out before U-Boot runs. This applies
to the RAM version image used for SPL boot if PPA is loaded first.

Signed-off-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge git://git.denx.de/u-boot-fsl-qoriq

armv8: fsl-lsch3: Instantiate TZASC configuration in 2 groups

Number of TZASC instances may vary across NXP SoCs.
So put TZASC configuration under instance specific defines.

Signed-off-by: Prabhaka

armv8: fsl-lsch3: Instantiate TZASC configuration in 2 groups

Number of TZASC instances may vary across NXP SoCs.
So put TZASC configuration under instance specific defines.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8: ls2080a: Drop macro CONFIG_LS2080A

Use CONFIG_ARCH_LS2080A instead.

Signed-off-by: York Sun <york.sun@nxp.com>

Merge git://git.denx.de/u-boot-fsl-qoriq

armv8: aarch64: Fix the warning about x1-x3 nonzero issue

For 64-bit kernel, there is a warning about x1-x3 nonzero in violation
of boot protocol. To fix this issue, input argument 4 is added for
ar

armv8: aarch64: Fix the warning about x1-x3 nonzero issue

For 64-bit kernel, there is a warning about x1-x3 nonzero in violation
of boot protocol. To fix this issue, input argument 4 is added for
armv8_switch_to_el2 and armv8_switch_to_el1. The input argument 4 will
be set to the right value, such as zero.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8/ls1043a: fixup GIC offset for ls1043a rev1

The LS1043A rev1.1 silicon supports two types of GIC offset: 4K
alignment and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT]
is used to choos

armv8/ls1043a: fixup GIC offset for ls1043a rev1

The LS1043A rev1.1 silicon supports two types of GIC offset: 4K
alignment and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT]
is used to choose which offset will be used.

The LS1043A rev1.0 silicon only supports the CIG offset with 4K
alignment.

If GIC_ADDR_BIT bit is set, 4K alignment is used, or else 64K alignment
is used. 64K alignment is the default setting.

Overriding the weak smp_kick_all_cpus, the new impletment is able to
detect GIC offset.

The default GIC offset in kernel device tree is using 4K alignment, it
need to be fixed if 64K alignment is detected.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8/fsl_lsch2: Add the OCRAM initialization

Clear the content to zero and the ECC error bit of OCRAM1/2.

The OCRAM must be initialized to ZERO by the unit of 8-Byte before
accessing it, or else i

armv8/fsl_lsch2: Add the OCRAM initialization

Clear the content to zero and the ECC error bit of OCRAM1/2.

The OCRAM must be initialized to ZERO by the unit of 8-Byte before
accessing it, or else it will generate ECC error. And the IBR has
accessed the OCRAM before this initialization, so the ECC error
status bit should to be cleared.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Pratiyush Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20

It is recommended to set forced-order mode in RNI-6,
RNI-20 for performance optimization in LS2088A.

Both LS2080A, LS2088A fami

armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20

It is recommended to set forced-order mode in RNI-6,
RNI-20 for performance optimization in LS2088A.

Both LS2080A, LS2088A families has CONFIG_LS2080A define.
As above update is required only for LS2088A, skip this
for LS2080A SoC family.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
arch/arm/Kconfig

armv8: Support loading 32-bit OS in AArch32 execution state

To support loading a 32-bit OS, the execution state will change from
AArch64 to AArch32 when jumping to kernel.

The architecture informat

armv8: Support loading 32-bit OS in AArch32 execution state

To support loading a 32-bit OS, the execution state will change from
AArch64 to AArch32 when jumping to kernel.

The architecture information will be got through checking FIT image,
then U-Boot will load 32-bit OS or 64-bit OS automatically.

Signed-off-by: Ebony Zhu <ebony.zhu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8: fsl-layerscape : Check SVR for initializing TZASC

LS2080 SoC and its personalities does not support TZASC
But other new SoCs like LS2088A, LS1088A supports TZASC

Hence, skip initializing TZA

armv8: fsl-layerscape : Check SVR for initializing TZASC

LS2080 SoC and its personalities does not support TZASC
But other new SoCs like LS2088A, LS1088A supports TZASC

Hence, skip initializing TZASC for Ls2080A based on SVR

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8: fsl-layerscape: Update TZASC registers type

TZASC registers like TZASC_GATE_KEEPER, TZASC_REGION_ATTRIBUTES
are 32-bit regsiters.
So while doing register load-store operations, 32-bit interme

armv8: fsl-layerscape: Update TZASC registers type

TZASC registers like TZASC_GATE_KEEPER, TZASC_REGION_ATTRIBUTES
are 32-bit regsiters.
So while doing register load-store operations, 32-bit intermediate
register, w0 should be used.
Update x0 register to w0 register type.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8: lsch3: Add generic get_svr() in assembly

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

Merge branch 'master' of git://git.denx.de/u-boot-tegra

armv8: add hooks for all cache-wide operations

SoC-specific logic may be required for all forms of cache-wide
operations; invalidate and flush of both dcache and icache (note that
only 3 of the 4 po

armv8: add hooks for all cache-wide operations

SoC-specific logic may be required for all forms of cache-wide
operations; invalidate and flush of both dcache and icache (note that
only 3 of the 4 possible combinations make sense, since the icache never
contains dirty lines). This patch adds an optional hook for all
implemented cache-wide operations, and renames the one existing hook to
better represent exactly which operation it is implementing. A dummy
no-op implementation of each hook is provided.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

trini: Drop local memset() from
examples/standalone/mem_to_mem_idma2intr.c

Signed-off-by: Tom Rini <trini@konsulko.com>

armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A

Move this option to Kconfig and clean up existing uses.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Mingkai Hu <mingkai.hu@n

armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A

Move this option to Kconfig and clean up existing uses.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Mingkai Hu <mingkai.hu@nxp.com>
CC: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...