Merge branch 'next-dev' into thunder-boot

UPSTREAM: armv8: ls1043a/ls2080a: check SoC by device ID

Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities

UPSTREAM: armv8: ls1043a/ls2080a: check SoC by device ID

Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Change-Id: I7be6b46fc17aa7f7a3a40677de0c18c9dd095c52
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit a8f33034f2ed029dd04aae4cfdf11bf1f13a03a2)

show more ...

UPSTREAM: libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt header

UPSTREAM: libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
include/libfdt.h -> include/linux/libfdt.h
include/libfdt_env.h -> include/linux/libfdt_env.h

and replaces include directives:
#include <libfdt.h> -> #include <linux/libfdt.h>
#include <libfdt_env.h> -> #include <linux/libfdt_env.h>

Change-Id: I6c0f7e50e8b571106627f25ddac008a62bd2994e
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

ARMv8/sec_firmware : Update chosen/kaslr-seed with random number

kASLR support in kernel requires a random number to be passed via
chosen/kaslr-seed propert. sec_firmware generates this random seed

ARMv8/sec_firmware : Update chosen/kaslr-seed with random number

kASLR support in kernel requires a random number to be passed via
chosen/kaslr-seed propert. sec_firmware generates this random seed
which can then be passed in the device tree node.

sec_firmware reserves JR3 for it's own usage. Node for JR3 is
removed from device-tree.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>

show more ...

fdt: Rename a few functions in fdt_support

These two functions have an of_ prefix which conflicts with naming used
in of_addr. Rename them:

fdt_read_number
fdt_support_bus_default_count_cells

fdt: Rename a few functions in fdt_support

These two functions have an of_ prefix which conflicts with naming used
in of_addr. Rename them:

fdt_read_number
fdt_support_bus_default_count_cells

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge git://git.denx.de/u-boot-fsl-qoriq

armv8/fsl-layerscape: fdt: avoid incorrect fixing with CONFIG_SYS_CLK_FREQ

Current sysclk fixing would fix all clocks with 'fixed-clock' compatible.
This patch is to fix sysclk by path to avoid any

armv8/fsl-layerscape: fdt: avoid incorrect fixing with CONFIG_SYS_CLK_FREQ

Current sysclk fixing would fix all clocks with 'fixed-clock' compatible.
This patch is to fix sysclk by path to avoid any incorrect fixing.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

armv8/fsl-layerscape: fdt: Skip checking USB clock on LS1012A

USB requires 100MHz clock. On LS1012A, a dedicated 100MHz is provided
instead of SYSCLK (125MHz). Skipping checking SYSCLK for FDT fixup

armv8/fsl-layerscape: fdt: Skip checking USB clock on LS1012A

USB requires 100MHz clock. On LS1012A, a dedicated 100MHz is provided
instead of SYSCLK (125MHz). Skipping checking SYSCLK for FDT fixup.

Signed-off-by: Yingxi Yu <yingxi.yu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

ARMv8/sec_firmware: relocated and renamed the config FSL_PPA_ARMV8_PSCI

Moved the config FSL_PPA_ARMV8_PSCI from fsl-layerscape's Kconfig to
Kconfig under armv8 and renamed it to SEC_FIRMWARE_ARMV8_

ARMv8/sec_firmware: relocated and renamed the config FSL_PPA_ARMV8_PSCI

Moved the config FSL_PPA_ARMV8_PSCI from fsl-layerscape's Kconfig to
Kconfig under armv8 and renamed it to SEC_FIRMWARE_ARMV8_PSCI.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node

The default MSI node in kernel tree is for LS1043A rev1.0 silicon, if
rev1.1 silicon used, need to fixup the MSI node to match it.

Signed-off-

armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node

The default MSI node in kernel tree is for LS1043A rev1.0 silicon, if
rev1.1 silicon used, need to fixup the MSI node to match it.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

armv8/ls1043a: fixup GIC offset for ls1043a rev1

The LS1043A rev1.1 silicon supports two types of GIC offset: 4K
alignment and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT]
is used to choos

armv8/ls1043a: fixup GIC offset for ls1043a rev1

The LS1043A rev1.1 silicon supports two types of GIC offset: 4K
alignment and 64K alignment. The bit SCFG_GIC400_ALIGN[GIC_ADDR_BIT]
is used to choose which offset will be used.

The LS1043A rev1.0 silicon only supports the CIG offset with 4K
alignment.

If GIC_ADDR_BIT bit is set, 4K alignment is used, or else 64K alignment
is used. 64K alignment is the default setting.

Overriding the weak smp_kick_all_cpus, the new impletment is able to
detect GIC offset.

The default GIC offset in kernel device tree is using 4K alignment, it
need to be fixed if 64K alignment is detected.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition

NXP/Freescale uses macro CONFIG_ARMV8_PSCI to enable their private PSCI
implementation in PPA firmware, but this macro naming too generic, s

ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition

NXP/Freescale uses macro CONFIG_ARMV8_PSCI to enable their private PSCI
implementation in PPA firmware, but this macro naming too generic, so this
patch replaces it with a specic one CONFIG_FSL_PPA_ARMV8_PSCI.
And this macro CONFIG_ARMV8_PSCI will be used for a generic PSCI for ARMv8
which will be added in following patchs.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2016-11-17

Highlights this time around:

- x86 efi_loader support
- hello world efi test case
- network devi

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2016-11-17

Highlights this time around:

- x86 efi_loader support
- hello world efi test case
- network device name is now representative
- terminal output reports modes correctly
- fix psci reset for ls1043/ls1046
- fix efi_add_runtime_mmio definition for x86
- efi_loader support for ls2080

show more ...

armv8: ls2080a: Declare spin tables as reserved for efi loader

The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes in

armv8: ls2080a: Declare spin tables as reserved for efi loader

The efi loader code has its own memory map, so it needs to be aware where
the spin tables are located, to ensure that no code writes into those
regions.

Signed-off-by: Alexander Graf <agraf@suse.de>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
include/configs/ls1021aqds.h
include/configs/ls1021atwr.h

armv8: fsl: Enable USB only when SYSCLK is 100 MHz

SYSCLK is used as a reference clock for USB. When the USB controller
is used, SYSCLK must meet the additional requirement of 100 MHz.

Signed-off-b

armv8: fsl: Enable USB only when SYSCLK is 100 MHz

SYSCLK is used as a reference clock for USB. When the USB controller
is used, SYSCLK must meet the additional requirement of 100 MHz.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
arch/arm/cpu/armv8/Makefile
arch/arm/lib/bootm-fdt.c

ARMv8/Layerscape: switch SMP method accordingly

If the PSCI and PPA is ready, skip the fixup for spin-table and
waking secondary cores. Otherwise, change SMP method to spin-table,
and the device nod

ARMv8/Layerscape: switch SMP method accordingly

If the PSCI and PPA is ready, skip the fixup for spin-table and
waking secondary cores. Otherwise, change SMP method to spin-table,
and the device node of PSCI will be removed.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq