arm: v8: Introduce spinlock support

Change-Id: Ib47aafb5695470464e5d5f176ad35382d19d1bdd
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

UPSTREAM: armv8 SHA-256 using ARMv8 Crypto Extensions

This patch adds support for the SHA-256 Secure Hash Algorithm for CPUs
that have support for the SHA-256 part of the ARM v8 Crypto Extensions.

UPSTREAM: armv8 SHA-256 using ARMv8 Crypto Extensions

This patch adds support for the SHA-256 Secure Hash Algorithm for CPUs
that have support for the SHA-256 part of the ARM v8 Crypto Extensions.

It greatly improves sha-256 based operations, about 17x faster on iMX8M
evk board. ~12ms vs ~208ms for a 20MiB kernel sha-256 verification.

asm implementation is a simplified version of the Linux version (from
Ard Biesheuvel).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I653b755a29f2cb4e3c1290b02ad48de9d413b455
(cherry picked from commit 0fcc1c76d1acaa68a0675f0baa0e5d9a25908bae)

show more ...

UPSTREAM: armv8 SHA-1 using ARMv8 Crypto Extensions:

This patch adds support for the SHA-1 Secure Hash Algorithm for CPUs
that have support for the SHA-1 part of the ARM v8 Crypto Extensions.

It gr

UPSTREAM: armv8 SHA-1 using ARMv8 Crypto Extensions:

This patch adds support for the SHA-1 Secure Hash Algorithm for CPUs
that have support for the SHA-1 part of the ARM v8 Crypto Extensions.

It greatly improves sha-1 based operations, about 10x faster on iMX8M
evk board. ~12ms vs ~165ms for a 20MiB kernel sha-1 verification.

asm implementation is a simplified version of the Linux version (from
Ard Biesheuvel).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: If03c03aafeba7a366b9b3fadce27b43f99d78e85
(cherry picked from commit 084d8e6bf9ea6673e94f798c5c3793893eb783ab)

show more ...

arm: armv7/8: add CONFIG_ARM_CPU_SUSPEND definition

Make it as a optional choice.

Change-Id: I87c5d8ce863eb64f3922fb4124e1f4a6aaf79257
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

arm: armv8: introduce cpu suspend and resume support

Just like linux, it supports cpu save and restore context
during enter and exit low power mode. With this patch, cpu
is able to suspend with core

arm: armv8: introduce cpu suspend and resume support

Just like linux, it supports cpu save and restore context
during enter and exit low power mode. With this patch, cpu
is able to suspend with core power off.

Workflow for trap into ATF for system suspend:
cpu_suspend
-> cpu_do_suspend
-> arch specific fn: int (*fn)(unsigned long)
-> psci_system_suspend(deliver 'cpu_resume()' address to ATF)
-> ATF system suspend
<- ATF system resume
<- cpu_resume
<- cpu_do_resume
next instruction

Notice: If needed, you should remember to save and restore GIC by yourself.

Change-Id: I7a7c4989ba0845f5b6880c55a6ea6c47724c99df
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

dm: timer: normalise SPL and TPL support

To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing

dm: timer: normalise SPL and TPL support

To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing
decision for each stage and under control of $(SPL_TPL_)TIMER
instead of having the two-level configuration with TIMER and
$(SPL_TPL_)TIMER_SUPPORT
- when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can
not be compiled in

This normalises configuration to $(SPL_TPL_)TIMER and moves the config
options to drivers/timer/Kconfig (and cleans up the collateral damage
to some defconfigs that had SPL_TIMER_SUPPORT enabled).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

ARM: adjust arm-smccc code for use in U-Boot

Adjust ARM SMC Calling Convention code for U-Boot:
- Replace the license block with SPDX
- Change path to asm-offsets.h
- Define UNWIND() as no-op

ARM: adjust arm-smccc code for use in U-Boot

Adjust ARM SMC Calling Convention code for U-Boot:
- Replace the license block with SPDX
- Change path to asm-offsets.h
- Define UNWIND() as no-op
- Add Kconfig entry
- Add asm-offsets

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

kconfig: armv8: move armv8 sec_firmware CONFIG_* to Kconfig

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[York S: clean up scripts/config_whitelist.txt]
Reviewed-by: York Sun <york.sun@nxp.com>

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

armv8: add lowlevel_init.S

For boards that call s_init() when the SPL runs, we are expected to
setup an early stack before calling this C function.
Implement the proper AArch64 version of this based

armv8: add lowlevel_init.S

For boards that call s_init() when the SPL runs, we are expected to
setup an early stack before calling this C function.
Implement the proper AArch64 version of this based on the ARMv7 code.
This allows sunxi boards to setup the basic peripherals even with a
64-bit SPL.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

ARMv8: Add basic PSCI framework

This patch introduces a generic ARMv8 PSCI framework, with all functions
returning a dummy ARM_PSCI_RET_NI (Not Implemented), then it is up to each
platform to implem

ARMv8: Add basic PSCI framework

This patch introduces a generic ARMv8 PSCI framework, with all functions
returning a dummy ARM_PSCI_RET_NI (Not Implemented), then it is up to each
platform to implement their own functions based on this framework.

Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
arch/arm/cpu/armv8/Makefile
arch/arm/lib/bootm-fdt.c

ARMv8/PSCI: Fixup the device tree for PSCI

Set the enable-method in the cpu node to PSCI, and create device
node for PSCI, when PSCI was enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

ARMv8/PSCI: Fixup the device tree for PSCI

Set the enable-method in the cpu node to PSCI, and create device
node for PSCI, when PSCI was enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

ARMv8: add the secure monitor firmware framework

This framework is introduced for ARMv8 secure monitor mode firmware.
The main functions of the framework are, on EL3, verify the firmware,
load it to

ARMv8: add the secure monitor firmware framework

This framework is introduced for ARMv8 secure monitor mode firmware.
The main functions of the framework are, on EL3, verify the firmware,
load it to the secure memory and jump into it, and while it returned
to U-Boot, do some necessary setups at the 'target exception level'
that is determined by the respective secure firmware.

So far, the framework support only FIT format image, and need to define
the name of which config node should be used in 'configurations' and
the name of property for the raw secure firmware image in that config.
The FIT image should be stored in Byte accessing memory, such as NOR
Flash, or else it should be copied to main memory to use this framework.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

show more ...

arm64: add better and more generic spin-table support

There are two enable methods supported by ARM64 Linux; psci and
spin-table. The latter is simpler and helpful for quick SoC bring
up. My main

arm64: add better and more generic spin-table support

There are two enable methods supported by ARM64 Linux; psci and
spin-table. The latter is simpler and helpful for quick SoC bring
up. My main motivation for this patch is to improve the spin-table
support, which allows us to boot an ARMv8 system without the ARM
Trusted Firmware.

Currently, we have multi-entry code in arch/arm/cpu/armv8/start.S
and the spin-table is supported in a really ad-hoc way, and I see
some problems:

- We must hard-code CPU_RELEASE_ADDR so that it matches the
"cpu-release-addr" property in the DT that comes from the
kernel tree.

- The Documentation/arm64/booting.txt in Linux requires that
the release address must be zero-initialized, but it is not
cared by the common code in U-Boot. We must do it in a board
function.

- There is no systematic way to protect the spin-table code from
the kernel. We are supposed to do it in a board specific manner,
but it is difficult to predict where the spin-table code will be
located after the relocation. So, it also makes difficult to
hard-code /memreserve/ in the DT of the kernel.

So, here is a patch to solve those problems; the DT is run-time
modified to reserve the spin-table code (+ cpu-release-addr).
Also, the "cpu-release-addr" property is set to an appropriate
address after the relocation, which means we no longer need the
hard-coded CPU_RELEASE_ADDR.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

armv8: s32v234: Introduce basic support for s32v234evb

Add initial support for NXP's S32V234 SoC and S32V234EVB board.

The S32V230 family is designed to support computation-intensive applications
f

armv8: s32v234: Introduce basic support for s32v234evb

Add initial support for NXP's S32V234 SoC and S32V234EVB board.

The S32V230 family is designed to support computation-intensive applications
for image processing. The S32V234, as part of the S32V230 family, is a
high-performance automotive processor designed to support safe
computation-intensive applications in the area of vision and sensor fusion.

Code originally writen by:
Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com>
Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>

Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>

show more ...

armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure

This commit adds functions issuing calls to secure monitor or
hypervisore. This allows using services such as Power State
Coordinat

armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure

This commit adds functions issuing calls to secure monitor or
hypervisore. This allows using services such as Power State
Coordination Interface (PSCI) provided by firmware, e.g. ARM
Trusted Firmware (ATF)

The SMC call can destroy all registers declared temporary by the
calling conventions. The clobber list is "x0..x17" because of
this

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>

show more ...

Merge git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

armv8/fsl_lsch3: Change arch to fsl-layerscape

There are two LS series processors are built on ARMv8 Layersacpe
architecture currently, LS2085A and LS1043A. They are based on
ARMv8 core although use

armv8/fsl_lsch3: Change arch to fsl-layerscape

There are two LS series processors are built on ARMv8 Layersacpe
architecture currently, LS2085A and LS1043A. They are based on
ARMv8 core although use different chassis, so create fsl-layerscape
to refactor the common code for the LS series processors which also
paves the way for adding LS1043A platform.

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

hisilicon: hi6220: Add a hi6220 pinmux driver.

This patch adds basic pinmux support for the hi6220 SoC,
which is found on the hikey board.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>