fix(memmap): reintroduce support for GNU map files

The intial patch stack only supported ELF files, which proved
particularly problematic when dealing with incomplete builds (i.e. build
didn't compl

fix(memmap): reintroduce support for GNU map files

The intial patch stack only supported ELF files, which proved
particularly problematic when dealing with incomplete builds (i.e. build
didn't complete due to linker errors). This adds support for GNU map
files. Most analysis performed by the tool should be possible with map
files alone.

Change-Id: I89f775a98efc5aef6671a17d0e6e973df555a6fa
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>

show more ...

Merge "docs: add detail to assembly language guideline" into integration

Merge "feat(aarch64): add stack debug information to assembly routines" into integration

Merge "fix(doc): match boot-order size to implementation" into integration

Merge "chore(xilinx): replace ATF with TFA" into integration

Merge changes from topic "hm/memmap-feat" into integration

* changes:
feat(memmap): add topological memory view
feat(memmap): add tabular memory use data

Merge "fix(stm32mp1): add void entry in plat_def_toc_entries" into integration

Merge "fix(zynqmp): fix sdei arm_validate_ns_entrypoint()" into integration

fix(zynqmp): fix prepare_dtb() memory description

The commit 8ce2fbffe37d ("fix(zynqmp): fix BLXX memory limits for user
defined values") fixed logic around BL31_LIMIT but didn't update
prepare_dtb(

fix(zynqmp): fix prepare_dtb() memory description

The commit 8ce2fbffe37d ("fix(zynqmp): fix BLXX memory limits for user
defined values") fixed logic around BL31_LIMIT but didn't update
prepare_dtb() which is also using +1 logic.

Change-Id: Ia6de10d992a552ca9cfa39c14261b0f94cda95ec
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>

show more ...

Merge "fix(qemu): fix 32-bit builds with stack protector" into integration

Merge changes from topic "bk/clearups" into integration

* changes:
chore(rme): add make rule for SPD=spmd
chore(bl1): remove redundant bl1_arch_next_el_setup
chore(docs): remove control regist

Merge changes from topic "bk/clearups" into integration

* changes:
chore(rme): add make rule for SPD=spmd
chore(bl1): remove redundant bl1_arch_next_el_setup
chore(docs): remove control register setup section
chore(pauth): remove redundant pauth_disable_el3() call

show more ...

fix(zynqmp): fix sdei arm_validate_ns_entrypoint()

Don't use BL31_LIMIT macro for validation logic directly but clearly
mark BL31_LIMIT as 64bit address to avoid compilation error when
-Werror=logic

fix(zynqmp): fix sdei arm_validate_ns_entrypoint()

Don't use BL31_LIMIT macro for validation logic directly but clearly
mark BL31_LIMIT as 64bit address to avoid compilation error when
-Werror=logical-op is passed.

Likely caused by ZYNQMP_ATF_MEM_BASE + ZYNQMP_ATF_MEM_SIZE is in 64bit
logic 0x100000000 and compiler handles it as 32bit value. That's why
error is shown.

Use uint64_t variable for limit and also for base.

Here is command line to replicate this issue:
make realclean; make -j PLAT=zynqmp DEBUG=1 RESET_TO_BL31=1 \
SPD=tspd SDEI_SUPPORT=1 ZYNQMP_ATF_MEM_BASE=0xFFFC0000 \
ZYNQMP_ATF_MEM_SIZE=0x00040000 all -Werror=logical-op

Also error which is coming:
plat/xilinx/zynqmp/zynqmp_sdei.c: In function
'arm_validate_ns_entrypoint':
plat/xilinx/zynqmp/zynqmp_sdei.c:19:40: error: logical 'or' of
collectively exhaustive tests is always true [-Werror=logical-op]
19 | return (entrypoint < BL31_BASE ||
entrypoint > BL31_LIMIT) ? 0 : -1;

Change-Id: Ie1f1b4d2cd94b977aebb72786ecace0b062da418
Signed-off-by: Michal Simek <michal.simek@amd.com>

show more ...

Merge changes I907f3862,Ie749ff06,If8da2bb1,I457deb0b into integration

* changes:
fix(el3-spmc): validate shmem descriptor alignment
refactor(el3-spmc): avoid using EINVAL
fix(el3-spmc): avoid

Merge changes I907f3862,Ie749ff06,If8da2bb1,I457deb0b into integration

* changes:
fix(el3-spmc): validate shmem descriptor alignment
refactor(el3-spmc): avoid using EINVAL
fix(el3-spmc): avoid descriptor size calc overflow
fix(el3-spmc): use uint64_t for 64-bit type

show more ...

Merge "chore(fconf): rename last occurences of set_fw_config_info()" into integration

chore: remove unused and undefined function

Clean up unused function

Signed-off-by: Raghu Krishnamurthy <raghu.ncstate@gmail.com>
Change-Id: Ib761d04070f7eb7e0dddad4ad885ce11f82582b8

Merge changes from topic "dummy_feat_aa32" into integration

* changes:
feat(cpufeat): deny AArch64-only features when building for AArch32
feat(cpufeat): add AArch32 PAN detection support

Merge "refactor(el3-spmc): avoid unneeded function call" into integration

Merge changes Ia052c7f9,If598680a,Ieae11722 into integration

* changes:
refactor(el3-spmc): move function call out of loop
refactor(el3-spmc): crash instead of reading OOB
fix(el3-spmc): preve

Merge changes Ia052c7f9,If598680a,Ieae11722 into integration

* changes:
refactor(el3-spmc): move function call out of loop
refactor(el3-spmc): crash instead of reading OOB
fix(el3-spmc): prevent total_page_count overflow

show more ...

Merge changes from topic "st-fixes" into integration

* changes:
fix(spi-nand): add Quad Enable management
fix(st-clock): disabling CKPER clock is not functional on stm32mp13
fix(st-uart): skip

Merge changes from topic "st-fixes" into integration

* changes:
fix(spi-nand): add Quad Enable management
fix(st-clock): disabling CKPER clock is not functional on stm32mp13
fix(st-uart): skip console flush if UART is disabled
fix(st): flush UART at the end of uart_read()
fix(stm32mp1): use the BSEC nodes compatible for stm32mp13
fix(stm32mp13-fdts): correct the BSEC nodes compatible
fix(stm32mp1-fdts): move /omit-if-no-ref/ to overlay files
fix(stm32mp1): properly check PSCI functions return

show more ...

chore(fconf): rename last occurences of set_fw_config_info()

set_fw_config_info() interface got renamed into set_config_info() as
part of commit f441718936a6b72583d03eebf8057bbf29446989 ("lib/fconf:

chore(fconf): rename last occurences of set_fw_config_info()

set_fw_config_info() interface got renamed into set_config_info() as
part of commit f441718936a6b72583d03eebf8057bbf29446989 ("lib/fconf:
Update 'set_fw_config_info' function"). Rename a few left-overs of the
old name.

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I119719cd7f3ba544e0c4c438e5341d35c7b5bdc2

show more ...

Merge "refactor(fvp): nv ctr addr static helper function" into integration

chore(xilinx): replace ATF with TFA

Since the Arm Trusted Firmware(ATF) has been renamed to Trusted
Firmware-A (TF-A), replace all the instances of ATF from code comments,
macros, variables and func

chore(xilinx): replace ATF with TFA

Since the Arm Trusted Firmware(ATF) has been renamed to Trusted
Firmware-A (TF-A), replace all the instances of ATF from code comments,
macros, variables and functions to TF-A.

Change-Id: Iab448d96158612a3effb4e49943f8d6cb43aaad5
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>

show more ...

fix(mediatek): support saving/restoring GICR registers

The GICR_IPRIORITYR[x] registers are not saved or restored in the
original design. When the kernel tries to use them, such as the
pseudo-NMI, i

fix(mediatek): support saving/restoring GICR registers

The GICR_IPRIORITYR[x] registers are not saved or restored in the
original design. When the kernel tries to use them, such as the
pseudo-NMI, it leads crashes and freezes. This patch adds support for
saving/restoring GICR registers.

Change-Id: I9718a75a1410ca14826710dfdf5f3226299fa6e2
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>

show more ...

Merge changes from topic "version/0.1-gic" into integration

* changes:
feat(qemu-sbsa): handle GIC base
feat(qemu-sbsa): handle platform version

Merge changes I21d65a88,I949cfce9,If4249f22,Id0451bd1,I9e930070, ... into integration

* changes:
feat(mediatek): add APU watchdog timeout control
feat(mt8188): add emi mpu protection for APU sec

Merge changes I21d65a88,I949cfce9,If4249f22,Id0451bd1,I9e930070, ... into integration

* changes:
feat(mediatek): add APU watchdog timeout control
feat(mt8188): add emi mpu protection for APU secure memory
feat(mt8188): add devapc setting of apusys rcx
feat(mt8188): add backup/restore function when power on/off
feat(mediatek): add APU bootup control smc call
feat(mt8188): enable apusys mailbox mpu protect
feat(mt8188): enable apusys domain remap
feat(mt8188): add apusys ao devapc setting
feat(mt8188): increase TZRAM_SIZE from 192KB to 256KB

show more ...