Merge pull request #1753 from Yann-lms/emmc_ret

mmc: correctly check ret in mmc_fill_device_info

Remove support for the SMC Calling Convention 2.0

This reverts commit 2f370465241c ("Add support for the SMC Calling
Convention 2.0").

SMCCC v2.0 is no longer required for SPM, and won't be needed

Remove support for the SMC Calling Convention 2.0

This reverts commit 2f370465241c ("Add support for the SMC Calling
Convention 2.0").

SMCCC v2.0 is no longer required for SPM, and won't be needed in the
future. Removing it makes the SMC handling code less complicated.

The SPM implementation based on SPCI and SPRT was using it, but it has
been adapted to SMCCC v1.0.

Change-Id: I36795b91857b2b9c00437cfbfed04b3c1627f578
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

lib/xlat_tables: Add support for ARMv8.4-TTST

ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the
size of translation tables by increasing the maximum permitted value
of the T1SZ

lib/xlat_tables: Add support for ARMv8.4-TTST

ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the
size of translation tables by increasing the maximum permitted value
of the T1SZ and T0SZ fields in TCR_EL1, TCR_EL2, TCR_EL3, VTCR_EL2 and
VSTCR_EL2.

This feature is supported in AArch64 state only.

This patch adds support for this feature to both versions of the
translation tables library. It also removes the static build time
checks for virtual address space size checks to runtime assertions.

Change-Id: I4e8cebc197ec1c2092dc7d307486616786e6c093
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

show more ...

Merge pull request #1791 from antonio-nino-diaz-arm/an/rk-gic

rockchip: Fix GICv2 interrupts

Merge pull request #1789 from Anson-Huang/lpm

Add power optimization for i.MX8QM/i.MX8QX

Merge pull request #1788 from laroche/rpi3_duplicate_initialization

rpi3: Remove duplicate initialization for BL32_IMAGE_ID and mark one more function as static.

Merge pull request #1786 from laroche/static_vars_functions

Change some vars and functions to be static.

Merge pull request #1794 from Andre-ARM/fiptool-fix

tools/fiptool: Fix UUID parsing in blob handling

doc: Add details on #include ordering

This patch adds more details on #include directive use, including (pun
not intended) the desired ordering, grouping and variants (<> or "").

Change-Id: Ib024ff

doc: Add details on #include ordering

This patch adds more details on #include directive use, including (pun
not intended) the desired ordering, grouping and variants (<> or "").

Change-Id: Ib024ffc4d3577c63179e1bbc408f0d0462026312
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

doc: Reorder coding guidelines document

This patch attempts to make the guidelines clearer by reordering
the sections and grouping similar topics.

Change-Id: I1418d6fc060d6403fe3e1978f32fd54b8793ad

doc: Reorder coding guidelines document

This patch attempts to make the guidelines clearer by reordering
the sections and grouping similar topics.

Change-Id: I1418d6fc060d6403fe3e1978f32fd54b8793ad5b
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

doc: Link coding guidelines to user guide

Adds a link from user-guide.rst to coding-guidelines.rst and merges
the information about using checkpatch from both files into the user
guide document.

Ch

doc: Link coding guidelines to user guide

Adds a link from user-guide.rst to coding-guidelines.rst and merges
the information about using checkpatch from both files into the user
guide document.

Change-Id: Iffbb4225836a042d20024faf28b8bdd6b2c4043e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

doc: Clarify ssize_t use in coding guidelines

Change-Id: I083f673f37495d2e53c704a43a0892231b6eb281
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Add AAPCS link to coding guidelines

Change-Id: Id0e6d272b6d3d37eab785273f9c12c093191f3fc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

doc: Add Coding Guidelines document

This content has been imported and adapted from the TF GitHub wiki
article 'ARM-Trusted-Firmware-Coding-Guidelines'.

The aim is to increase the visibility of the

doc: Add Coding Guidelines document

This content has been imported and adapted from the TF GitHub wiki
article 'ARM-Trusted-Firmware-Coding-Guidelines'.

The aim is to increase the visibility of the coding guidelines by
including them as part of the documentation that is within the TF
repository.

Additionally, the documentation can then be linked to by other
documents in the docs/ directory without worrying about broken links
to, for example, the external wiki.

Change-Id: I9d8cd6b5117b707c1a113baeba7fc5e1b4bf33bc
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

show more ...

tools/fiptool: Fix UUID parsing in blob handling

Commit 033648652f ("Make TF UUID RFC 4122 compliant") changed the scanf
parsing string to handle endianness correctly.
However that changed the numbe

tools/fiptool: Fix UUID parsing in blob handling

Commit 033648652f ("Make TF UUID RFC 4122 compliant") changed the scanf
parsing string to handle endianness correctly.
However that changed the number of items sscanf handles, without
adjusting the sanity check just below.

Increase the expected return value from 11 to 16 to let fiptool handle
UUIDs given as blob parameters correctly again.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

rcar_gen3: drivers: ddr: Clean up printouts

Clean up the NOTICE() and FATAL_MSG() outputs, so that they contain
proper newlines and BL2 prefixes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gma

rcar_gen3: drivers: ddr: Clean up printouts

Clean up the NOTICE() and FATAL_MSG() outputs, so that they contain
proper newlines and BL2 prefixes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: drivers: cpld: fix power-off on reset

Method cpld_reset_cpu of bl31 is called from the Linux kernel and uses
GPIO6, GPIO2 pins as SPI bus lines to control the CPLD device. But in the
kern

rcar_gen3: drivers: cpld: fix power-off on reset

Method cpld_reset_cpu of bl31 is called from the Linux kernel and uses
GPIO6, GPIO2 pins as SPI bus lines to control the CPLD device. But in the
kernel GPIO6_8 pin are initialized to work in interrupt mode instead of
the input/output mode. This leads to the fact that the SPI bus becomes
non-functional. In this patch we switch the GPIO6_8 pin back to the
input-output mode.

Signed-off-by: Sergii Boryshchenko <sergii.boryshchenko@globallogic.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Add missing cpu_on_check() implementation

The ATF code fails to build with PMIC_ROHM_BD9571=0, add the missing
function into the PWRC code.

Signed-off-by: Marek Vasut <marek.vasut+

rcar_gen3: plat: Add missing cpu_on_check() implementation

The ATF code fails to build with PMIC_ROHM_BD9571=0, add the missing
function into the PWRC code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

rcar_gen3: plat: Allow E3 auto-detection

Allow auto-detecting E3 when RCAR_LSI is set to RCAR_AUTO.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

rcar_gen3: plat: Drop unused macro

The macro is not used, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Revert "rcar_gen3: plat: Enable programmable CPU reset address"

This reverts commit d48536e2f92d47ebb92cf12b35133c3be2d0e459,
which misbehaves on R-Car H3 ES2.0. Until the reason for that
misbehavio

Revert "rcar_gen3: plat: Enable programmable CPU reset address"

This reverts commit d48536e2f92d47ebb92cf12b35133c3be2d0e459,
which misbehaves on R-Car H3 ES2.0. Until the reason for that
misbehavior is understood, revert the commit.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

show more ...

imx: power optimization for i.mx8qx

Current implementation of i.MX8QX power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kep

imx: power optimization for i.mx8qx

Current implementation of i.MX8QX power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kept in STBY mode (powered
ON) when system suspend or CPU hotplug.

To lower the power number, OFF mode should be adopted for those
system resources whenever they can be OFF, A cluster will be OFF
if the CPUs in the cluster are all off line, DDR/MU/DB can be OFF
if system suspend, IRQ steer can be OFF if the wakeup source is
belonged to system controller partition, so wakeup source runtime
check is used to determine if IRQ steer can be OFF before system
suspend.

If resources are powered off for suspend, they should be restored
properly after system resume.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: power optimization for i.mx8qm

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kep

imx: power optimization for i.mx8qm

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kept in STBY mode (powered
ON) when system suspend or CPU hotplug.

To lower the power number, OFF mode should be adopted for those
system resources whenever they can be OFF, A cluster will be OFF
if the CPUs in the cluster are all off line, DDR/MU/DB can be OFF
if system suspend, IRQ steer can be OFF if the wakeup source is
belonged to system controller partition, so wakeup source runtime
check is used to determine if IRQ steer can be OFF before system
suspend.

If resources are powered off for suspend, they should be restored
properly after system resume.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

rpi3: mark one more function as static

Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>

rpi3: remove duplicate initialization for BL32_IMAGE_ID

Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>