Merge "arm_fpga: Add support for unknown MPIDs" into integration

plat/arm: Add platform support for Morello

This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to t

plat/arm: Add platform support for Morello

This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to take
the role of primary bootloader.

Change-Id: I1ecbe5a14a2d487b2ecea3c1ca227f08473ed2dd
Co-authored-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Anurag Koul <anurag.koul@arm.com>

show more ...

fdts: add device tree sources for morello platform

Change-Id: Ib5945c37983505f327a195bdb8b91ed1b7b90921
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>

lib/cpus: add support for Morello Rainier CPUs

This patch adds CPU support for the Rainier CPU which is
derived from Neoverse N1 r4p0 CPU and implements the
Morello capability architecture.

Change-

lib/cpus: add support for Morello Rainier CPUs

This patch adds CPU support for the Rainier CPU which is
derived from Neoverse N1 r4p0 CPU and implements the
Morello capability architecture.

Change-Id: Ic6b796481da5a66504ecb0648879446edf4c69fb
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>

show more ...

Measured Boot Driver: Fix MISRA-C 2012 defects

This patch fixes MISRA C-2012 Pointers and Arrays
Rule 18.4 defects reported by Coverity scan:
"misra_c_2012_rule_18_4_violation: Using arithmetic on p

Measured Boot Driver: Fix MISRA-C 2012 defects

This patch fixes MISRA C-2012 Pointers and Arrays
Rule 18.4 defects reported by Coverity scan:
"misra_c_2012_rule_18_4_violation: Using arithmetic on pointer "

Change-Id: I06753b28467c473e346b9871c1657284fc43a3f3
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Workaround for Cortex A77 erratum 1508412

Cortex A77 erratum 1508412 is a Cat B Errata present in r0p0 and r1p0.
The workaround is a write sequence to several implementation defined
registers based

Workaround for Cortex A77 erratum 1508412

Cortex A77 erratum 1508412 is a Cat B Errata present in r0p0 and r1p0.
The workaround is a write sequence to several implementation defined
registers based on A77 revision.

This errata is explained in this SDEN:
https://static.docs.arm.com/101992/0010/Arm_Cortex_A77_MP074_Software_Developer_Errata_Notice_v10.pdf

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I217993cffb3ac57c313db8490e7b8a7bb393379b

show more ...

arm_fpga: Add support for unknown MPIDs

This patch allows the system to fallback to a default CPU library
in case the MPID does not match with any of the supported ones.

This feature can be enabled

arm_fpga: Add support for unknown MPIDs

This patch allows the system to fallback to a default CPU library
in case the MPID does not match with any of the supported ones.

This feature can be enabled by setting SUPPORT_UNKNOWN_MPID build
option to 1 (enabled by default only on arm_fpga platform).

This feature can be very dangerous on a production image and
therefore it MUST be disabled for Release images.

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I0df7ef2b012d7d60a4fd5de44dea1fbbb46881ba

show more ...

Merge changes from topic "stm32_drivers_update" into integration

* changes:
clk: stm32mp1: fix rcc mckprot status
drivers: st: add missing includes in ETZPC header
mmc: st: clear some flags be

Merge changes from topic "stm32_drivers_update" into integration

* changes:
clk: stm32mp1: fix rcc mckprot status
drivers: st: add missing includes in ETZPC header
mmc: st: clear some flags before sending a command
mmc: st: correct retries management
nand: raw_nand: fix timeout issue in nand_wait_ready
mtd: spi_nor: change message level on macronix detection
gpio: stm32_gpio: check GPIO node status after checking DT
crypto: stm32_hash: fix issue when restarting computation

show more ...

Merge changes from topic "tc0_architecture_change" into integration

* changes:
plat: tc0: enable TZC
fdts: tc0: update MHUv2 interrupt number

mediatek: mt8192: add GIC600 support

1. Implement GIC600 driver support and init
2. Remove unused debug info

Signed-off-by: Greta Zhang <greta.zhang@mediatek.com>
Change-Id: I30c08c531e705debc02907

mediatek: mt8192: add GIC600 support

1. Implement GIC600 driver support and init
2. Remove unused debug info

Signed-off-by: Greta Zhang <greta.zhang@mediatek.com>
Change-Id: I30c08c531e705debc029071e4e970048e261c386

show more ...

Merge "plat/arm/css/sgi: Map flash used for mem_protect" into integration

Merge "plat/arm: Introduce and use libc_asm.mk makefile" into integration

plat/arm/css/sgi: Map flash used for mem_protect

The SGI platform defines the macro PLAT_ARM_MEM_PROT_ADDR which
indicates that the platform has mitigation for cold reboot attacks.

However, the fla

plat/arm/css/sgi: Map flash used for mem_protect

The SGI platform defines the macro PLAT_ARM_MEM_PROT_ADDR which
indicates that the platform has mitigation for cold reboot attacks.

However, the flash memory used for the mem_protect region was not
mapped. This results in a crash when an OS calls PSCI MEM_PROTECT.

To fix this map the flash region used for mem_protect.

Change-Id: Ia494f924ecfe2ce835c045689ba8f942bf0941f4
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

show more ...

Merge "Select the Log Level for the Event Log Dump on Measured Boot at build time." into integration

plat: tc0: enable TZC

Change-Id: Ic2bb8482f0b602f6b7850d4fa553448bc4931edc
Signed-off-by: Usama Arif <usama.arif@arm.com>

clk: stm32mp1: fix rcc mckprot status

MCKPROT hardening in RCC mandates that both bits RCC[TZEN] and
RCC[MCKPROT] are enabled. This change fixes stm32mp1_rcc_is_mckprot()
to check both bits, not RCC

clk: stm32mp1: fix rcc mckprot status

MCKPROT hardening in RCC mandates that both bits RCC[TZEN] and
RCC[MCKPROT] are enabled. This change fixes stm32mp1_rcc_is_mckprot()
to check both bits, not RCC[MCKPROT] only.

This change also updates stm32mp1_rcc_is_secure() for consistency.

Change-Id: If1f07babdcb5677906ddbf974d9dc17255d4e174
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

drivers: st: add missing includes in ETZPC header

Depending on compiler, the issue about bool or uint*_t not defined can
appear.
Correct this by adding stdbool.h and stdint.h includes in etzpc.h.

C

drivers: st: add missing includes in ETZPC header

Depending on compiler, the issue about bool or uint*_t not defined can
appear.
Correct this by adding stdbool.h and stdint.h includes in etzpc.h.

Change-Id: If1419dc511efbe682459fa4a776481fa52a38aa3
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

mmc: st: clear some flags before sending a command

The ICR static flags are cleared before sending a command.
The SDMMC_DCTRLR register is set to 0 if no data is expected on a given
command or on th

mmc: st: clear some flags before sending a command

The ICR static flags are cleared before sending a command.
The SDMMC_DCTRLR register is set to 0 if no data is expected on a given
command or on the next command in case of CMD55.

Change-Id: I5ae172a484218f53160e98b3684967c6960475a6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

mmc: st: correct retries management

The retries number should be 3.
A warning message is added in mmc_block_read(), and the code is refactored.

Change-Id: I577c7dd91c451c7580b1660042cb5fe26ee3fa12

mmc: st: correct retries management

The retries number should be 3.
A warning message is added in mmc_block_read(), and the code is refactored.

Change-Id: I577c7dd91c451c7580b1660042cb5fe26ee3fa12
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

nand: raw_nand: fix timeout issue in nand_wait_ready

nand_wait_ready is called with a millisecond delay
but the timeout used a micro second. Fixing the conversion
in the timeout call.
The prototype

nand: raw_nand: fix timeout issue in nand_wait_ready

nand_wait_ready is called with a millisecond delay
but the timeout used a micro second. Fixing the conversion
in the timeout call.
The prototype of the function is also changed to use an unsigned int
parameter.

Change-Id: Ia3281be7980477dfbfdb842308d35ecd8b926fb8
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

mtd: spi_nor: change message level on macronix detection

Change the detection message from WARN to INFO when macronix
NOR is detected.

Change-Id: I488696f1fb75b823e85decfcd6cd32e7b36a6c2e
Signed-of

mtd: spi_nor: change message level on macronix detection

Change the detection message from WARN to INFO when macronix
NOR is detected.

Change-Id: I488696f1fb75b823e85decfcd6cd32e7b36a6c2e
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

gpio: stm32_gpio: check GPIO node status after checking DT

The call to fdt_get_status(node) has to be done after the DT is found
to be valid.

Fixes: 1fc2130c5 stm32mp1: update device tree and gpio

gpio: stm32_gpio: check GPIO node status after checking DT

The call to fdt_get_status(node) has to be done after the DT is found
to be valid.

Fixes: 1fc2130c5 stm32mp1: update device tree and gpio functions

Change-Id: I70f803aae3dde128a9e740f54c8837b64cb1a244
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

crypto: stm32_hash: fix issue when restarting computation

While restarting a new hash computation, STR register
is not cleared. It needs to be written before each
computation.

Change-Id: If65902dd2

crypto: stm32_hash: fix issue when restarting computation

While restarting a new hash computation, STR register
is not cleared. It needs to be written before each
computation.

Change-Id: If65902dd21f9c139ec5da3ca87721232f73710db
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

fdts: stm32mp1: realign device tree with kernel

There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU a

fdts: stm32mp1: realign device tree with kernel

There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A

The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.

There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.

STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.

Some reordering is done in other files, and realign with kernel DT files.

The DDR files are generated with our internal tool, no changes in the
registers values.

Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

Merge "libc: Import strtok_r from FreeBSD project" into integration