Merge "build: remove Windows compatibility layer" into integration

build: remove Windows compatibility layer

For a couple of releases now we have officially withdrawn support for
building TF-A on Windows using the native environment, relying instead
on POSIX emulat

build: remove Windows compatibility layer

For a couple of releases now we have officially withdrawn support for
building TF-A on Windows using the native environment, relying instead
on POSIX emulation layers like MSYS2, Mingw64, Cygwin or WSL.

This change removes the remainder of the OS compatibility layer
entirely, and migrates the build system over to explicitly relying on a
POSIX environment.

Change-Id: I8fb60d998162422e958009afd17eab826e3bc39b
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge changes from topic "ck/tf-a/verbosity-cleanup" into integration

* changes:
build: unify verbosity handling
build: add facilities for interpreting boolean values
build: add string casing

Merge changes from topic "ck/tf-a/verbosity-cleanup" into integration

* changes:
build: unify verbosity handling
build: add facilities for interpreting boolean values
build: add string casing facilities to utilities

show more ...

build: unify verbosity handling

This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.

The `silent` and `verbose` variables

build: unify verbosity handling

This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.

The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).

These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:

make --silent V=1

... results in a silent build.

In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.

When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:

$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'

When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:

$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'

In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:

$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'

The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.

Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge changes from topics "ls1088a", "ls1088a-prepare" into integration

* changes:
docs(layerscape): add ls1088a soc and board support
feat(ls1088aqds): add ls1088aqds board support
feat(ls108

Merge changes from topics "ls1088a", "ls1088a-prepare" into integration

* changes:
docs(layerscape): add ls1088a soc and board support
feat(ls1088aqds): add ls1088aqds board support
feat(ls1088ardb): add ls1088ardb board support
feat(ls1088a): add new SoC platform ls1088a
build(changelog): add new scopes for ls1088a
feat(bl2): add support to separate no-loadable sections
refactor(layerscape): refine comparison of inerconnection
feat(layerscape): add soc helper macro definition for chassis 3
feat(nxp-gic): add some macros definition for gicv3
feat(layerscape): add CHASSIS 3 support for tbbr
feat(layerscape): define more chassis 3 hardware address
feat(nxp-crypto): add chassis 3 support
feat(nxp-dcfg): add Chassis 3 support
feat(lx2): enable DDR erratas for lx2 platforms
feat(layerscape): print DDR errata information
feat(nxp-ddr): add workaround for errata A050958
feat(layerscape): add new soc errata a010539 support
feat(layerscape): add new soc errata a009660 support
feat(nxp-ddr): add rawcard 1F support
fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically
fix(nxp-tools): fix create_pbl print log
build(changelog): add new scopes for NXP driver

show more ...

fix(nxp-tools): fix create_pbl print log

Replace bl2_offset with bl2_loc, and fix byte-swapping for
Chassis2 SoC(s) only.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafe

fix(nxp-tools): fix create_pbl print log

Replace bl2_offset with bl2_loc, and fix byte-swapping for
Chassis2 SoC(s) only.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ieb5fd6468178325bfb6fb89b6c31c75cd9030363

show more ...

Merge changes I500ddbe9,I9c10dac9,I53bfff85,I06f7594d,I24bff8d4, ... into integration

* changes:
nxp lx2160a-aqds: new plat based on soc lx2160a
NXP lx2160a-rdb: new plat based on SoC lx2160a

Merge changes I500ddbe9,I9c10dac9,I53bfff85,I06f7594d,I24bff8d4, ... into integration

* changes:
nxp lx2160a-aqds: new plat based on soc lx2160a
NXP lx2160a-rdb: new plat based on SoC lx2160a
nxp lx2162aqds: new plat based on soc lx2160a
nxp: errata handling at soc level for lx2160a
nxp: make file for loading additional ddr image
nxp: adding support of soc lx2160a
nxp: deflt hdr files for soc & their platforms
nxp: platform files for bl2 and bl31 setup
nxp: warm reset support to retain ddr content
nxp: nv storage api on platforms
nxp: supports two mode of trusted board boot
nxp: fip-handler for additional fip_fuse.bin
nxp: fip-handler for additional ddr-fip.bin
nxp: image loader for loading fip image
nxp: svp & sip smc handling
nxp: psci platform functions used by lib/psci
nxp: helper function used by plat & common code
nxp: add data handler used by bl31
nxp: adding the driver.mk file
nxp-tool: for creating pbl file from bl2
nxp: adding the smmu driver
nxp: cot using nxp internal and mbedtls
nxp:driver for crypto h/w accelerator caam
nxp:add driver support for sd and emmc
nxp:add qspi driver
nxp: add flexspi driver support
nxp: adding gic apis for nxp soc
nxp: gpio driver support
nxp: added csu driver
nxp: driver pmu for nxp soc
nxp: ddr driver enablement for nxp layerscape soc
nxp: i2c driver support.
NXP: Driver for NXP Security Monitor
NXP: SFP driver support for NXP SoC
NXP: Interconnect API based on ARM CCN-CCI driver
NXP: TZC API to configure ddr region
NXP: Timer API added to enable ARM generic timer
nxp: add dcfg driver
nxp:add console driver for nxp platform
tools: add mechanism to allow platform specific image UUID
tbbr-cot: conditional definition for the macro
tbbr-cot: fix the issue of compiling time define
cert_create: updated tool for platform defined certs, keys & extensions
tbbr-tools: enable override TRUSTED_KEY_CERT

show more ...

nxp-tool: for creating pbl file from bl2

NXP tool to create pbl from bl2 binary:
- RCW is prepended to BL2.bin
- If TRUSTED_BOARD_BOOT=1, pre-append the CSF header
to be understood by NXP boot-rom.

nxp-tool: for creating pbl file from bl2

NXP tool to create pbl from bl2 binary:
- RCW is prepended to BL2.bin
- If TRUSTED_BOARD_BOOT=1, pre-append the CSF header
to be understood by NXP boot-rom.

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Iddc7336a045222e2073ddad86358ebc4440b8bcf

show more ...