fix(drtm): return proper values for DRTM get and set error SMCs

The DRTM get and set error previously returned SMC_UNK when these
SMCs were issued. This has been corrected to return an appropriate
e

fix(drtm): return proper values for DRTM get and set error SMCs

The DRTM get and set error previously returned SMC_UNK when these
SMCs were issued. This has been corrected to return an appropriate
error code on failure, and success otherwise.
Also,align the error code values with the specification.

Change-Id: I8f11f94f1ab097245003dbde97365fa54e0097ba
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

fix(sdei): fix a crash when attempting to bind more events than are available

You can only bind a limited number of events in each range. If you
attempt to bind more, it was crashing. This patch mak

fix(sdei): fix a crash when attempting to bind more events than are available

You can only bind a limited number of events in each range. If you
attempt to bind more, it was crashing. This patch makes it return an
error code instead.

Change-Id: Ib19f0f0780959ded244d45349d9d6c8607255c15
Signed-off-by: Charlie Bareham <charlie.bareham@arm.com>

show more ...

chore(cm): reorganise sctlr_el1 and tcr_el1 ctx code

SCTLR_EL1 and TCR_EL1 regs are included either as part of errata
"ERRATA_SPECULATIVE_AT" or under el1_sysregs_t context structure.
The code to wr

chore(cm): reorganise sctlr_el1 and tcr_el1 ctx code

SCTLR_EL1 and TCR_EL1 regs are included either as part of errata
"ERRATA_SPECULATIVE_AT" or under el1_sysregs_t context structure.
The code to write and read into these context entries, looks
repetitive and is invoked at most places.
This section is refactored to bring them under a static procedure,
keeping the code neat and easier to maintain.

Change-Id: Ib0d8c51bee09e1600c5baaa7f9745083dca9fee1
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge changes from topic "mp/simd_ctxt_mgmt" into integration

* changes:
feat(fvp): allow SIMD context to be put in TZC DRAM
docs(simd): introduce CTX_INCLUDE_SVE_REGS build flag
feat(fvp): ad

Merge changes from topic "mp/simd_ctxt_mgmt" into integration

* changes:
feat(fvp): allow SIMD context to be put in TZC DRAM
docs(simd): introduce CTX_INCLUDE_SVE_REGS build flag
feat(fvp): add Cactus partition manifest for EL3 SPMC
chore(simd): remove unused macros and utilities for FP
feat(el3-spmc): support simd context management upon world switch
feat(trusty): switch to simd_ctx_save/restore apis
feat(pncd): switch to simd_ctx_save/restore apis
feat(spm-mm): switch to simd_ctx_save/restore APIs
feat(simd): add rules to rationalize simd ctxt mgmt
feat(simd): introduce simd context helper APIs
feat(simd): add routines to save, restore sve state
feat(simd): add sve state to simd ctxt struct
feat(simd): add data struct for simd ctxt management

show more ...

feat(el3-spmc): support simd context management upon world switch

This patch performs necessary simd context management operations for
context switch from NWd to SWD and vice versa.

Change-Id: Ife0

feat(el3-spmc): support simd context management upon world switch

This patch performs necessary simd context management operations for
context switch from NWd to SWD and vice versa.

Change-Id: Ife01fffc4e2a7f3deb9b6273424161c225fdbbfb
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

feat(trusty): switch to simd_ctx_save/restore apis

Change-Id: Ifa72334c4793965c23a20d31ff6dff258f72ddcb
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

feat(pncd): switch to simd_ctx_save/restore apis

Change-Id: I662c0b35e938f8b2013ec60f863de55445f559da
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

feat(spm-mm): switch to simd_ctx_save/restore APIs

This patch demonstrates the trivial changes to transparently switch
the fpregs_context_* helpers to simd_ctx_* helpers.

Signed-off-by: Madhukar Pa

feat(spm-mm): switch to simd_ctx_save/restore APIs

This patch demonstrates the trivial changes to transparently switch
the fpregs_context_* helpers to simd_ctx_* helpers.

Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I14bda6bd0ead1f34a570b59be8dec3ac40891c20

show more ...

refactor(errata-abi): move EXTRACT_PARTNUM to arch.h

This patch moves EXTRACT_PARTNUM from errata abi includes
to arch.h which is part of common includes

Change-Id: Id8bbaf21566f3145a75cfa0dafec682

refactor(errata-abi): move EXTRACT_PARTNUM to arch.h

This patch moves EXTRACT_PARTNUM from errata abi includes
to arch.h which is part of common includes

Change-Id: Id8bbaf21566f3145a75cfa0dafec6823ed2df3a9
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>

show more ...

Merge changes from topic "jc/refact_el1_ctx" into integration

* changes:
refactor(cm): convert el1-ctx assembly offset entries to c structure
feat(cm): add explicit context entries for ERRATA_SP

Merge changes from topic "jc/refact_el1_ctx" into integration

* changes:
refactor(cm): convert el1-ctx assembly offset entries to c structure
feat(cm): add explicit context entries for ERRATA_SPECULATIVE_AT

show more ...

Merge changes from topic "rmmd-graceful-exit" into integration

* changes:
fix(rmmd): remove the assert check for RMM_BASE
fix(std_svc): continue boot if rmmd_setup fails
fix(rmmd): ignore SMC

Merge changes from topic "rmmd-graceful-exit" into integration

* changes:
fix(rmmd): remove the assert check for RMM_BASE
fix(std_svc): continue boot if rmmd_setup fails
fix(rmmd): ignore SMC FID when RMM image is not present
fix(rmmd): fail gracefully if RME is not enabled
fix(rmmd): handle RMMD manifest loading failure

show more ...

refactor(cm): convert el1-ctx assembly offset entries to c structure

Currently the EL1 part of the context structure (el1_sysregs_t),
is coupled with feature flags reducing the context memory alloca

refactor(cm): convert el1-ctx assembly offset entries to c structure

Currently the EL1 part of the context structure (el1_sysregs_t),
is coupled with feature flags reducing the context memory allocation
for platforms, that don't enable/support all the architectural
features at once.

Similar to the el2 context optimization commit-"d6af234" this patch
further improves this section by converting the assembly context-offset
entries into a c structure. It relies on garbage collection of the
linker removing unreferenced structures from memory, as well as aiding
in readability and future maintenance. Additionally, it eliminates
the #ifs usage in 'context_mgmt.c' source file.

Change-Id: If6075931cec994bc89231241337eccc7042c5ede
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

feat(cm): add explicit context entries for ERRATA_SPECULATIVE_AT

* Currently, "ERRATA_SPECUALTIVE_AT" errata is enabled by default
for few cores and they need context entries for saving and
rest

feat(cm): add explicit context entries for ERRATA_SPECULATIVE_AT

* Currently, "ERRATA_SPECUALTIVE_AT" errata is enabled by default
for few cores and they need context entries for saving and
restoring EL1 regs "SCTLR_EL1 and TCR_EL1" registers at all times.

* This prevents the mechanism of decoupling EL1 and EL2 registers,
as EL3 firmware shouldn't be handling both simultaneously.

* Depending on the build configuration either EL1 or EL2 context
structures need to included, which would result in saving a good
amount of context memory.

* In order to achieve this it's essential to have explicit context
entries for registers supporting "ERRATA_SPECULATIVE_AT".

* This patch adds two context entries under "errata_speculative_at"
structure to assist this errata and thereby allows decoupling
EL1 and EL2 context structures.

Change-Id: Ia50626eea8fb64899a2e2d81622adbe07fe77d65
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge "feat(handoff): fix register convention r1/x1 value on transfer list" into integration

feat(handoff): fix register convention r1/x1 value on transfer list

According to recently firmware handsoff spec [1]'s "Register usage at handoff
boundary", Transfer List's signature value was chang

feat(handoff): fix register convention r1/x1 value on transfer list

According to recently firmware handsoff spec [1]'s "Register usage at handoff
boundary", Transfer List's signature value was changed from 0x40_b10b
(3 bytes) to 4a0f_b10b (4 bytes).

As updating of TL's signature, register value of x1/r1 should be:

In aarch32's r1 value should be
R1[23:0]: set to the TL signature (4a0f_b10b -> masked range value: 0f_b10b)
R1[31:24]: version of the register convention == 1
and
In aarch64's x1 value should be
X1[31:0]: set to the TL signature (4a0f_b10b)
X1[39:32]: version of the register convention == 1
X1[63:40]: MBZ
(See the [2] and [3]).

Therefore, it requires to separate mask and shift value for register
convention version field when sets each r1/x1.

This patch fix two problems:
1. breaking X1 value with updated specification in aarch64
- change of length of signature field.

2. previous error value set in R1 in arm32.
- length of signature should be 24, but it uses 32bit signature.

This change is breaking change. It requires some patch for other
softwares (u-boot[4], optee[5]).

Link: https://github.com/FirmwareHandoff/firmware_handoff [1]
Link: https://github.com/FirmwareHandoff/firmware_handoff/issues/32 [2]
Link: https://github.com/FirmwareHandoff/firmware_handoff/commit/5aa7aa1d3a1db75213e458d392b751f0707de027 [3]
Link: https://lists.denx.de/pipermail/u-boot/2024-July/558628.html [4]
Link: https://github.com/OP-TEE/optee_os/pull/6933 [5]
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Change-Id: Ie417e054a7a4c192024a2679419e99efeded1705

show more ...

fix(rmmd): remove the assert check for RMM_BASE

This patch removes the assert from rmmd_setup() that checks if the
RMM image PC is equal to RMM_BASE. The RMM image can be relocated to
any address in

fix(rmmd): remove the assert check for RMM_BASE

This patch removes the assert from rmmd_setup() that checks if the
RMM image PC is equal to RMM_BASE. The RMM image can be relocated to
any address in the DRAM by the previous bootloader. So, providing the
RMM base address at compile time is not feasible for such platforms.

The assert check is now replaced with a runtime check for the RMM image.

Change-Id: I568cdb6f76f41d0dcdc7a95feb75e252a7c5c930
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

fix(std_svc): continue boot if rmmd_setup fails

This patch allows the boot sequence to continue even if
rmmd_setup() fails. This allows platforms to use the same
RME-enabled image to support the sce

fix(std_svc): continue boot if rmmd_setup fails

This patch allows the boot sequence to continue even if
rmmd_setup() fails. This allows platforms to use the same
RME-enabled image to support the scenarios where RMM image
is not present.

Change-Id: Ie4de15fb98ae7226eda410e15f1a650108dd8fb3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

fix(rmmd): ignore SMC FID when RMM image is not present

This patch marks the RMM boot as failed, to ignore the SMC
FID for the RMM at runtime, if RMM image is not present on
the platform.

Change-Id

fix(rmmd): ignore SMC FID when RMM image is not present

This patch marks the RMM boot as failed, to ignore the SMC
FID for the RMM at runtime, if RMM image is not present on
the platform.

Change-Id: I3c19d886d32c56837a1a0d260d5204da8b2d12f1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

fix(rmmd): fail gracefully if RME is not enabled

This patch converts the assert check for RME presence into
a runtime check and returns an error to fail gracefully. This
allows platforms to use the

fix(rmmd): fail gracefully if RME is not enabled

This patch converts the assert check for RME presence into
a runtime check and returns an error to fail gracefully. This
allows platforms to use the same image on boards that do not
support RME too.

Change-Id: I0cacdd7afd85ed3581e90ea81f0a51d076adb875
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

fix(rmmd): handle RMMD manifest loading failure

This patch sets the rmm_boot_failed flag to true if the RMMD
manifest loading fails. This instructs the RMMD to ignore all
SMC FID for the RMM at runt

fix(rmmd): handle RMMD manifest loading failure

This patch sets the rmm_boot_failed flag to true if the RMMD
manifest loading fails. This instructs the RMMD to ignore all
SMC FID for the RMM at runtime.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: If61be6200e28fcea7a5ad697393e83679f488abc

show more ...

refactor(spmd): move plat_my_core_pos calls

By tracing instruction execution, it is observed:
Placing plat_my_core_pos at top of functions translate by the compiler
into calling those functions even

refactor(spmd): move plat_my_core_pos calls

By tracing instruction execution, it is observed:
Placing plat_my_core_pos at top of functions translate by the compiler
into calling those functions even if the result is not consumed when not
printed.
plat_my_core_pos is used to retrieve the core id for the currently
running core, but effectively call sites are only consuming it for
verbosity purposes. Move plat_my_core_pos calls into the print functions
that require it.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ia3549453b5e4de7c575a8887a4d19e318658d03e

show more ...

refactor(spmd): call cm_get_context once

As observed by tracing instruction execution the SMC_RET18
macro in spmd_smc_switch_state calls cm_get_context, however the
compiler expands it to multiple i

refactor(spmd): call cm_get_context once

As observed by tracing instruction execution the SMC_RET18
macro in spmd_smc_switch_state calls cm_get_context, however the
compiler expands it to multiple individual non-inlined calls to
this same function. Store the result of cm_get_context into a local
variable and use it in the macro such that this function is only called
once.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ib4fa63aced2f07c67c057f54fef3780c85e91df7

show more ...

refactor(spmd): remove spmd_get_context_by_mpidr

spmd_get_context_by_mpidr calls plat_core_pos_by_mpidr defined in
platform's fvp_topology. This involves a lot of intricated inner calls
including ac

refactor(spmd): remove spmd_get_context_by_mpidr

spmd_get_context_by_mpidr calls plat_core_pos_by_mpidr defined in
platform's fvp_topology. This involves a lot of intricated inner calls
including access to power controller (taking/releasing a bakery lock).
Remove dependency from this function, and use plat_my_core_pos instead.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I8e91858922e339de51056dba8803db74c8fd7420

show more ...

chore(errata-abi): minor variable rename

'cpu_partnumber' variable part of 'em_cpu_list' actually contains the
cpu midr value and not the actual part number. The part number is
extracted from midr v

chore(errata-abi): minor variable rename

'cpu_partnumber' variable part of 'em_cpu_list' actually contains the
cpu midr value and not the actual part number. The part number is
extracted from midr value in 'non_arm_interconnect_errata' function.

So 'cpu_partnumber' is misleading and the actual value is midr, thus
rename it to 'cpu_midr'.

Change-Id: I4bfe71ce24542d508e2bcf39a1097724d14c4511
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>

show more ...

Merge changes from topic "makefile-cleanup" into integration

* changes:
build: improve diagnostics for unrecognized toolchain tools
build(rzg): separate BL2 and BL31 SREC generation
build(rcar

Merge changes from topic "makefile-cleanup" into integration

* changes:
build: improve diagnostics for unrecognized toolchain tools
build(rzg): separate BL2 and BL31 SREC generation
build(rcar): separate BL2 and BL31 SREC generation
build: separate preprocessing from DTB compilation
build: remove `MAKE_BUILD_STRINGS` function

show more ...