plat: xilinx: zynqmp: Get chipid from registers for BL32

This patch reads the chipid registers directly instead of making
pm call when running at BL32. User should ensure that these registers
should

plat: xilinx: zynqmp: Get chipid from registers for BL32

This patch reads the chipid registers directly instead of making
pm call when running at BL32. User should ensure that these registers
should always be accessed from APU in their system configuration.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

plat: xilinx: zynqmp: Build for DDR if SPD is enabled

This patch builds ATF to DDR if SPD is enabled as it cant fit in
On chip memory(OCM) with SPD enabled. This solves the issue
of build failure wi

plat: xilinx: zynqmp: Build for DDR if SPD is enabled

This patch builds ATF to DDR if SPD is enabled as it cant fit in
On chip memory(OCM) with SPD enabled. This solves the issue
of build failure with SPD enabled for ZynqMP platform.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

Make TF UUID RFC 4122 compliant

RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the f

Make TF UUID RFC 4122 compliant

RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the future UUIDs that are already generated, but we can store
all the bytes using arrays and modify fiptool to generate the UUIDs with
the correct byte order.

Change-Id: I97be2d3168d91f4dee7ccfafc533ea55ff33e46f
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

zynqmp: Add wdt timeout restart functionality

This patch adds support to restart system incase of wdt
timeout.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

zynqmp: Fix EG/EV detection logic

The vcu disable bit in efuse ipdisable register is valid
only if PL powered up so, consider PL powerup status for
determing EG/EV part. If PL is not powered up, dis

zynqmp: Fix EG/EV detection logic

The vcu disable bit in efuse ipdisable register is valid
only if PL powered up so, consider PL powerup status for
determing EG/EV part. If PL is not powered up, display
EG/EV as a part of string. The PL powerup status will
be filled by pmufw based on PL PROGB status in the
9th bit of version field.This patch also used IPI
to get this info from pmufw instead of directly accessing
the registers. Accessing this info from pmufw using
IPI fixes the issue of PMUFW access denied error for
reading IPDISABLE register.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

show more ...

zynqmp: Add new API for processing secure images

This patch adds new API for processing secure images. This API
is used for authentication and decryption of secure images using
xilsecure in pmufw.

zynqmp: Add new API for processing secure images

This patch adds new API for processing secure images. This API
is used for authentication and decryption of secure images using
xilsecure in pmufw.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

xilinx: zynqmp: pm_service: Fix APU only restart

Existing code blocks each IPI send request in ipi_mb_notify()
function till pmu clears respective bit in ipi observation
register.

After sending PM_

xilinx: zynqmp: pm_service: Fix APU only restart

Existing code blocks each IPI send request in ipi_mb_notify()
function till pmu clears respective bit in ipi observation
register.

After sending PM_SYSTEM_SHUTDOWN request to PMU, PMU will
restart APU. While PMU is restarting APU, ATF is running out
of OCM, which can cause read/write hang from/to OCM.
There is no need to wait for notification from PMU in case
of SystemShutdown request in ATF, as APU is going to restart.

This patch fixes APU only restart issue.

Signed-off-by: Tejas Patel <tejasp@xilinx.com>
Acked-by: Wendy Liang <wendy.liang@xilinx.com>

show more ...

plat: xilinx: zynqmp: Make fpga load blocking until completed

This patch makes bitstream load blocking call and waits until
bitstream is loaded successfully or return with error.

Signed-off-by: Siv

plat: xilinx: zynqmp: Make fpga load blocking until completed

This patch makes bitstream load blocking call and waits until
bitstream is loaded successfully or return with error.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Avesh Khan <aveshk@xilinx.com>

show more ...

plat: xilinx: zynqmp: Remove GET_CALLBACK_DATA function

GET_CALLBACK_DATA function is not required now. IPI mailbox
can be used instead of GET_CALLBACK_DATA function.

Signed-off-by: Siva Durga Pras

plat: xilinx: zynqmp: Remove GET_CALLBACK_DATA function

GET_CALLBACK_DATA function is not required now. IPI mailbox
can be used instead of GET_CALLBACK_DATA function.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

zynqmp: pm_service: Make PMU IPI-1 channel unsecure

PMU IPI-1 is used for callbacks from PMU to master. Unsecure
master can also receive callbacks from PMU, so make PMU IPI-1
as non-secure.

All req

zynqmp: pm_service: Make PMU IPI-1 channel unsecure

PMU IPI-1 is used for callbacks from PMU to master. Unsecure
master can also receive callbacks from PMU, so make PMU IPI-1
as non-secure.

All requests from master(s) to PMU would still go on PMU IPI-1
secure channel.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>

show more ...

zynqmp: pm: Remove unnecessary header includes

Remove includes of gic_common.h and string.h which
are not required.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Acked-by: Jolly Shah <jollys@xilinx

zynqmp: pm: Remove unnecessary header includes

Remove includes of gic_common.h and string.h which
are not required.

Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Acked-by: Jolly Shah <jollys@xilinx.com>

show more ...

xilinx: zynqmp: Remove PMU Firmware checks

Xilinx now requires the PMU FW when using ATF, so it doesn't make sense
to maintain checks for the PMU FW in ATF. This also means that cases
where ATF came

xilinx: zynqmp: Remove PMU Firmware checks

Xilinx now requires the PMU FW when using ATF, so it doesn't make sense
to maintain checks for the PMU FW in ATF. This also means that cases
where ATF came up before the PMU FW (such as on QEMU) ATF will now hang
waiting for the PMU FW instead of aborting.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynqmp: pm: Reverse logic for detecting that the PMU firmware is loaded

Use positive logic (pm_up instead of pm_down) to check whether PMU
services are available. This change also puts the variable

zynqmp: pm: Reverse logic for detecting that the PMU firmware is loaded

Use positive logic (pm_up instead of pm_down) to check whether PMU
services are available. This change also puts the variable into the
BSS section rather than the Data section as the variable is now
initialized to 0 rather than 1.

Signed-off-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

plat: zynqmp: Don't panic() if we can't find the FSBL struct

If we can't find the FSBL handoff struct don't panic and just use the
defaults instead.

We still print a warning to the user to let them

plat: zynqmp: Don't panic() if we can't find the FSBL struct

If we can't find the FSBL handoff struct don't panic and just use the
defaults instead.

We still print a warning to the user to let them know what we couldn't
find it.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

show more ...

plat: zynqmp: Let fsbl_atf_handover() return an error status

Instead of calling panic() in fsbl_atf_handover() return the error
status so that bl31_early_platform_setup() can act accordingly.

Signe

plat: zynqmp: Let fsbl_atf_handover() return an error status

Instead of calling panic() in fsbl_atf_handover() return the error
status so that bl31_early_platform_setup() can act accordingly.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

Include "bl_common.h" in Xilinx zynqmp_private.h

Type "entry_point_info_t" is used in zynqmp_private.h. It is defined
in "bl_common.h". The header file which defines the type should be
included.

Si

Include "bl_common.h" in Xilinx zynqmp_private.h

Type "entry_point_info_t" is used in zynqmp_private.h. It is defined
in "bl_common.h". The header file which defines the type should be
included.

Signed-off-by: Wendy Liang <jliang@xilinx.com>

show more ...

zynqmp: pm: Added APIs for xilsecure linux support

Added SHA to calculate SHA3 hash,RSA to encrypt data with
public key and decrypt with private key and AES to do symmetric
encryption with User key

zynqmp: pm: Added APIs for xilsecure linux support

Added SHA to calculate SHA3 hash,RSA to encrypt data with
public key and decrypt with private key and AES to do symmetric
encryption with User key or device key.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

plat: zynqmp: Add support for CG/EG/EV device detection

Read ipdisable reg which needs to be used for cg/eg/ev device detection.
ATF runs in EL3 that's why this read can be done directly.

Signed-of

plat: zynqmp: Add support for CG/EG/EV device detection

Read ipdisable reg which needs to be used for cg/eg/ev device detection.
ATF runs in EL3 that's why this read can be done directly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

aarch64: zynqmp: Add new Ids for RFSoC

Add new id codes for RFSoC's.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

zynqmp: Fix CSU ID SVD mask fo getting chip ID

This patch corrects the SVD mask for getting chip ID
using 0xe is wrong and 0x7 is correct.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.

zynqmp: Fix CSU ID SVD mask fo getting chip ID

This patch corrects the SVD mask for getting chip ID
using 0xe is wrong and 0x7 is correct.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

show more ...

zynqmp: pm: Allow to set shutdown scope via pm_system_shutdown API

psci system_reset and system_off calls now retrieve shutdown scope on
the fly. The default scope is system, but it can be changed b

zynqmp: pm: Allow to set shutdown scope via pm_system_shutdown API

psci system_reset and system_off calls now retrieve shutdown scope on
the fly. The default scope is system, but it can be changed by calling
pm_system_shutdown(2, scope)

Until full support for different restart scopes becomes available with
PSCI 1.1 this change allows users to set the reboot scope to match
their application needs.

Possible scope values:
0 - APU subsystem: does not affect RPU, PMU or PL
1 - PS only: shutdown/restart entire PS without affecting PL
2 - System: shutdown/restart applies to entire system

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Davorin Mista <davorin.mista@aggios.com>

show more ...

zynqmp: pm: Implement PM_INIT_FINALIZE PM API call

The PM_INIT_FINALIZE PM API is required to inform the PFW that APU is
done with requesting nodes and that not-requested nodes can be powered
down.

zynqmp: pm: Implement PM_INIT_FINALIZE PM API call

The PM_INIT_FINALIZE PM API is required to inform the PFW that APU is
done with requesting nodes and that not-requested nodes can be powered
down. If PM is not enabled, this call will never be made and PFW will
never power down any of the nodes which APU can use.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

show more ...

zynqmp: pm: Rename PM_INIT to PM_INIT_FINALIZE

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

zynqmp: pm: Implemented new pm API to load secure images

This patch adds pm_secure_rsaaes() API to provide access to
the xilsecure library for loading secure images

Signed-off-by: Siva Durga Prasad

zynqmp: pm: Implemented new pm API to load secure images

This patch adds pm_secure_rsaaes() API to provide access to
the xilsecure library for loading secure images

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>

show more ...

xilinx: zynqmp: Read bootmode register using PM API

Read boot mode register using pm_mmio_read if pmu is
present otherwise access it directly using mmio_read_32().

Signed-off-by: Siva Durga Prasad

xilinx: zynqmp: Read bootmode register using PM API

Read boot mode register using pm_mmio_read if pmu is
present otherwise access it directly using mmio_read_32().

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

show more ...