Merge "feat(versal-net): add SDEI support" into integration

feat(versal-net): add SDEI support

Add basic SDEI support with following configuration settings:
- SGI 8 as the source IRQ.
- Special Private event 0.
- One private and shared dynamic event used in

feat(versal-net): add SDEI support

Add basic SDEI support with following configuration settings:
- SGI 8 as the source IRQ.
- Special Private event 0.
- One private and shared dynamic event used in tftf verification
for SDEI support.
- SDEI support is off by default.

Change-Id: I7cfafb84c3fc053ec67258698cf749e63486fe18
Signed-off-by: Amit Nagal <amit.nagal@amd.com>

show more ...

Merge changes from topic "xlnx_fix_plat_invalid_entry" into integration

* changes:
fix(versal): handle invalid entry point in cpu hotplug scenario
fix(versal-net): handle invalid entry point in

Merge changes from topic "xlnx_fix_plat_invalid_entry" into integration

* changes:
fix(versal): handle invalid entry point in cpu hotplug scenario
fix(versal-net): handle invalid entry point in cpu hotplug scenario
fix(zynqmp): handle invalid entry point in cpu hotplug scenario

show more ...

fix(versal-net): handle invalid entry point in cpu hotplug scenario

Invalid addresses are from 2G-4G and also address where TF-A is.

Change-Id: I153d26bd92ea26efcd7f236e2f1d89c3e5442ba4
Signed-off-

fix(versal-net): handle invalid entry point in cpu hotplug scenario

Invalid addresses are from 2G-4G and also address where TF-A is.

Change-Id: I153d26bd92ea26efcd7f236e2f1d89c3e5442ba4
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>

show more ...

Merge changes from topic "xlnx_fix_plat_single_ret" into integration

* changes:
fix(versal2): modify function to have single return
fix(versal-net): modify function to have single return
fix(v

Merge changes from topic "xlnx_fix_plat_single_ret" into integration

* changes:
fix(versal2): modify function to have single return
fix(versal-net): modify function to have single return
fix(versal): modify function to have single return
fix(xilinx): modify function to have single return
fix(zynqmp): modify function to have single return
fix(versal-net): add unsigned suffix to match data type
fix(versal): add unsigned suffix to match data type
fix(versal2): add missing curly braces
fix(versal-net): add missing curly braces
fix(zynqmp): add missing curly braces

show more ...

fix(versal-net): modify function to have single return

This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to stor

fix(versal-net): modify function to have single return

This corrects the MISRA violation C2012-15.5:
A function should have a single point of exit at the end.
Introduced a temporary variable to store the return value to
ensure single return for the function.

Change-Id: Ib8b3339f32031a3657f6c349763a20a99fd828e7
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>

show more ...

Merge changes from topic "idling-during-subsystem-restart" into integration

* changes:
fix(xilinx): add console_flush() before shutdown
fix(xilinx): fix sending sgi to linux
feat(xilinx): add

Merge changes from topic "idling-during-subsystem-restart" into integration

* changes:
fix(xilinx): add console_flush() before shutdown
fix(xilinx): fix sending sgi to linux
feat(xilinx): add new state to identify cpu power down
feat(xilinx): request cpu power down from reset
feat(xilinx): power down all cores on receiving cpu pwrdwn req
feat(xilinx): add handler for power down req sgi irq
feat(xilinx): add wrapper to handle cpu power down req
fix(versal-net): use arm common GIC handlers
fix(xilinx): rename macros to align with ARM

show more ...

feat(xilinx): add handler for power down req sgi irq

On receiving CPU power down callback, TF-A raises SGI interrupt to all active
cores to power down each active cores. Add handler for this SGI IRQ

feat(xilinx): add handler for power down req sgi irq

On receiving CPU power down callback, TF-A raises SGI interrupt to all active
cores to power down each active cores. Add handler for this SGI IRQ.

By default TF-A uses SGI 6 for CPU power down request. This can be
configurable through CPU_PWRDWN_SGI build flag.

e.g., If user wants to use SGI 7 instead of SGI 6 then provide build
flag CPU_PWRDWN_SGI=7

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: Id0df32187d1de3f0af4486eb4d4930cb3ab01dbd

show more ...

fix(xilinx): rename macros to align with ARM

Use generic macro name as per common ARM GIC macro name for Versal
and Versal NET.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id:

fix(xilinx): rename macros to align with ARM

Use generic macro name as per common ARM GIC macro name for Versal
and Versal NET.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: I2987ff2f612993fc80979f0179c04d316259ed1d

show more ...

Merge changes from topic "xlnx_dtb_modification" into integration

* changes:
feat(versal-net): ddr address reservation in dtb at runtime
feat(versal): ddr address reservation in dtb at runtime

feat(versal-net): ddr address reservation in dtb at runtime

When the TF-A is placed in DDR memory range, the DDR memory range
needs to be explicitly reserved in the default device tree.

A new build

feat(versal-net): ddr address reservation in dtb at runtime

When the TF-A is placed in DDR memory range, the DDR memory range
needs to be explicitly reserved in the default device tree.

A new build time parameter, XILINX_OF_BOARD_DTB_ADDR, is introduced.
The TF-A will reserve the DDR memory only when a valid DTB address
is provided to XILINX_OF_BOARD_DTB_ADDR during build.

Now the user has options, either manually reserve the desired DDR
address range for TF-A in device tree or let TF-A access and modify
the device tree, to reserve the DDR address range, in runtime using
the build parameter.

Change-Id: I45a5d9a8343ea8a19ea014a70023731de94d061a
Signed-off-by: Amit Nagal <amit.nagal@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>

show more ...

Merge "fix(versal-net): fix BLXX memory limits for user defined values" into integration

fix(versal-net): fix BLXX memory limits for user defined values

When compiling with user defined areas of memory the platform code
calculates the size with (base + size - 1). However, the linker
fi

fix(versal-net): fix BLXX memory limits for user defined values

When compiling with user defined areas of memory the platform code
calculates the size with (base + size - 1). However, the linker
file aligns section on a page boundary. So having the -1 in
the size calculations leads to an error message looking like this:

bl31.elf section `coherent_ram' will not fit in region `RAM'
aarch64-buildroot-linux-uclibc-ld: region `RAM' overflowed by 1 byte

While at it fix all other occurences of predefined values that were
calculated with -1.

Fixes: 1d333e69091f ("feat(versal-net): add support for Xilinx
Versal NET platform")
Change-Id: I4455f63ee3ad52369f517a7d8d3627faf0b28c0f
Signed-off-by: Michal Simek <michal.simek@amd.com>

show more ...

Merge "style(xilinx): replace ARM by Arm in copyrights" into integration

style(xilinx): replace ARM by Arm in copyrights

The commit 6bb49c876c75 ("style(hooks): adds Arm copyright style fix")
is enforcing proper case for ARM. That's why fix it in plat/xilinx to
make sure

style(xilinx): replace ARM by Arm in copyrights

The commit 6bb49c876c75 ("style(hooks): adds Arm copyright style fix")
is enforcing proper case for ARM. That's why fix it in plat/xilinx to
make sure that pre-commit.copyright won't be touching platform specific
files.

Change-Id: I49c66e18d46ed871a6aa128c9b2a403d0cf83416
Signed-off-by: Michal Simek <michal.simek@amd.com>

show more ...

Merge changes from topic "set-wake-source-for-versal-net" into integration

* changes:
refactor(xilinx): move enum to common place
fix(xilinx): fix misra defects
fix(xilinx): remove unnecessary

Merge changes from topic "set-wake-source-for-versal-net" into integration

* changes:
refactor(xilinx): move enum to common place
fix(xilinx): fix misra defects
fix(xilinx): remove unnecessary condition
feat(versal): replace irq array with switch case
feat(versal-net): add support for set wakeup source
refactor(versal): move set wake src fn to common place

show more ...

Merge "refactor(xilinx): rename gic macros to make common" into integration

refactor(versal): move set wake src fn to common place

Moved pm_client_set_wakeup_sources() to make common for both Versal and
Versal NET platforms.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatt

refactor(versal): move set wake src fn to common place

Moved pm_client_set_wakeup_sources() to make common for both Versal and
Versal NET platforms.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: Ib82c5f85a0a27bc47940f6796f1cf68b2c38a908

show more ...

refactor(xilinx): rename gic macros to make common

Rename macros PLAT_VERSAL_GICD_BASE, PLAT_VERSAL_GICR_BASE,
PLAT_VERSAL_NET_GICD_BASE and PLAT_VERSAL_NET_GICR_BASE to
PLAT_GICD_BASE_VALUE and PLA

refactor(xilinx): rename gic macros to make common

Rename macros PLAT_VERSAL_GICD_BASE, PLAT_VERSAL_GICR_BASE,
PLAT_VERSAL_NET_GICD_BASE and PLAT_VERSAL_NET_GICR_BASE to
PLAT_GICD_BASE_VALUE and PLAT_GICR_BASE_VALUE to make common
for both Versal and Versal NET platforms.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: Ibcebfb8e741e828ef272b32cbedfb4dcbf8629b6

show more ...

Merge "fix(versal_net): fix irq for IPI0" into integration

fix(versal_net): fix irq for IPI0

Currently isr is not called when IPI0 interrupt occurs.
fix irq number and enable GIC interrupt properly to invoke
registered isr on IPI0 interrupt.

Signed-off-by:

fix(versal_net): fix irq for IPI0

Currently isr is not called when IPI0 interrupt occurs.
fix irq number and enable GIC interrupt properly to invoke
registered isr on IPI0 interrupt.

Signed-off-by: Trung Tran <trung.tran@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Change-Id: Id0408b3a560b25234886a9fa01c4ed248d1d1532

show more ...

Merge changes from topic "xilinx-versal-net" into integration

* changes:
feat(versal-net): add support for platform management
feat(versal-net): add support for IPI
feat(versal-net): add SMP s

Merge changes from topic "xilinx-versal-net" into integration

* changes:
feat(versal-net): add support for platform management
feat(versal-net): add support for IPI
feat(versal-net): add SMP support for Versal NET
feat(versal-net): add support for Xilinx Versal NET platform
feat(versal-net): add documentation for Versal NET SoC

show more ...

feat(versal-net): add support for Xilinx Versal NET platform

New SoC is a78 based with gicv3 and uart over pl011. Communication
interfaces are similar to Versal platform. System starts with Xilinx P

feat(versal-net): add support for Xilinx Versal NET platform

New SoC is a78 based with gicv3 and uart over pl011. Communication
interfaces are similar to Versal platform. System starts with Xilinx PLM
firmware which loads TF-A(bl31) to DDR, which is already configured, and
jumps to it. PLM also prepare handoff structure for TF-A with information
what components were load and flags which indicate which EL level SW should
be started.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Akshay Belsare <Akshay.Belsare@amd.com>
Change-Id: I2a16c242a77be6c91be3d198727dc3b9bbb97410

show more ...