Merge "uniphier: increase BL33 max size and GZIP temporary buffer size" into integration

uniphier: increase BL33 max size and GZIP temporary buffer size

The current BL33 size is large enough for U-Boot, but we need to
increase the limit to use other boot loaders such as edk2.

Increase

uniphier: increase BL33 max size and GZIP temporary buffer size

The current BL33 size is large enough for U-Boot, but we need to
increase the limit to use other boot loaders such as edk2.

Increase the buffer size used for GZIP decompression too.

BL33 max size (UNIPHIER_BL33_MAX_SIZE): 1MB -> 8MB
GZIP buffer (UNIPHIER_IMAGE_BUF_SIZE): 1MB -> 8MB

Increasing the block buffer size (UNIPHIER_BLOCK_BUF_SIZE) is not
required, but I increased it too to make it work more efficiently.

Change-Id: I4fa6d795bed9ab9ada7f8f616c7d47076139e3a8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: use enable_mmu() in common function

Currently, enable_mmu_el1() or enable_mmu_el3() is kept outside the
common function because the appropriate one must be chosen.

Use enable_mmu() and mo

uniphier: use enable_mmu() in common function

Currently, enable_mmu_el1() or enable_mmu_el3() is kept outside the
common function because the appropriate one must be chosen.

Use enable_mmu() and move it to the common function.

Change-Id: If2fb651691a7b6be05674f5cf730ae067ba95d4b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge changes from topic "uniphier" into integration

* changes:
uniphier: make I/O register region configurable
uniphier: make PSCI related base address configurable
uniphier: make counter con

Merge changes from topic "uniphier" into integration

* changes:
uniphier: make I/O register region configurable
uniphier: make PSCI related base address configurable
uniphier: make counter control base address configurable
uniphier: make UART base address configurable
uniphier: make pinmon base address configurable
uniphier: make NAND controller base address configurable
uniphier: make eMMC controller base address configurable

show more ...

uniphier: make I/O register region configurable

The I/O register region will be changed in the next SoC. Make it
configurable.

Change-Id: Iec0cbd1ef2d0703ebc7c3d3082edd73791bbfec9
Signed-off-by: Ma

uniphier: make I/O register region configurable

The I/O register region will be changed in the next SoC. Make it
configurable.

Change-Id: Iec0cbd1ef2d0703ebc7c3d3082edd73791bbfec9
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: make UART base address configurable

The next SoC supports the same UART, but the register base will be
changed. Make it configurable.

Change-Id: Ida5c9151b2f3554afd15555b22838437eef443f7

uniphier: make UART base address configurable

The next SoC supports the same UART, but the register base will be
changed. Make it configurable.

Change-Id: Ida5c9151b2f3554afd15555b22838437eef443f7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge changes from topic "pie" into integration

* changes:
uniphier: make all BL images completely position-independent
uniphier: make uniphier_mmap_setup() work with PIE
uniphier: pass SCP ba

Merge changes from topic "pie" into integration

* changes:
uniphier: make all BL images completely position-independent
uniphier: make uniphier_mmap_setup() work with PIE
uniphier: pass SCP base address as a function parameter
uniphier: set buffer offset and length for io_block dynamically
uniphier: use more mmap_add_dynamic_region() for loading images
bl_common: add BL_END macro
uniphier: turn on ENABLE_PIE
TSP: add PIE support
BL2_AT_EL3: add PIE support
BL31: discard .dynsym .dynstr .hash sections to make ENABLE_PIE work
PIE: pass PIE options only to BL31
Build: support per-BL LDFLAGS

show more ...

uniphier: make all BL images completely position-independent

This platform supports multiple SoCs. The next SoC will still keep
quite similar architecture, but the memory base will be changed.

The

uniphier: make all BL images completely position-independent

This platform supports multiple SoCs. The next SoC will still keep
quite similar architecture, but the memory base will be changed.

The ENABLE_PIE improves the maintainability and usability. You can reuse
a single set of BL images for other SoC/board without re-compiling TF-A
at all. This will also keep the code cleaner because it avoids #ifdef
around various base addresses.

By defining ENABLE_PIE, BL2_AT_EL3, BL31, and BL32 (TSP) are really
position-independent now. You can load them anywhere irrespective of
their link address.

Change-Id: I8d5e3124ee30012f5b3bfa278b0baff8efd2fff7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: make uniphier_mmap_setup() work with PIE

BL2_BASE, BL31_BASE, and BL32_BASE are defined in platform_def.h,
that is, determined at link-time.

On the other hand, BL2_END, BL31_END, and BL32

uniphier: make uniphier_mmap_setup() work with PIE

BL2_BASE, BL31_BASE, and BL32_BASE are defined in platform_def.h,
that is, determined at link-time.

On the other hand, BL2_END, BL31_END, and BL32_END are derived from
the symbols produced by the linker scripts. So, they are fixed-up
at run-time if ENABLE_PIE is enabled.

To make it work in a position-indepenent manner, use BL_CODE_BASE and
BL_END, both of which are relocatable.

Change-Id: Ic179a7c60eb64c5f3024b178690b3ac7cbd7521b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: pass SCP base address as a function parameter

Currently, UNIPHIER_SCP_BASE is hard-coded in uniphier_scp_start(),
which is not handy for PIE.

Towards the goal of making this really positi

uniphier: pass SCP base address as a function parameter

Currently, UNIPHIER_SCP_BASE is hard-coded in uniphier_scp_start(),
which is not handy for PIE.

Towards the goal of making this really position-independent, pass in
image_info->image_base.

Change-Id: I88e020a1919c607b1d5ce70b116201d95773bb63
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: use more mmap_add_dynamic_region() for loading images

Currently, uniphier_bl2_mmap hard-codes the memory region needed for
loading other images.

Towards the goal of making this really pos

uniphier: use more mmap_add_dynamic_region() for loading images

Currently, uniphier_bl2_mmap hard-codes the memory region needed for
loading other images.

Towards the goal of making this really position-independent, call
mmap_add_dynamic_region() before that region gets accessed.

Change-Id: Ieb505b91ccf2483e5f1a280accda564b33f19f11
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge pull request #1804 from antonio-nino-diaz-arm/an/cleanup

Minor cleanup

Remove duplicated definitions of linker symbols

Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this heade

Remove duplicated definitions of linker symbols

Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.

As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.

Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1656 from masahir0y/uniphier

uniphier: clean-up and improve SCP handling code

uniphier: terminate boot if SCP_BL2 image is missing in SCP boot mode

Skipping SCP_BL2 image is just a temporary workaround. If on-chip SCP
needs to work, BL2 should load the SCP_BL2 image.

Signed-

uniphier: terminate boot if SCP_BL2 image is missing in SCP boot mode

Skipping SCP_BL2 image is just a temporary workaround. If on-chip SCP
needs to work, BL2 should load the SCP_BL2 image.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge pull request #1313 from jonathanwright-ARM/jw/MISRA-switch-statements

Fix switch statements to comply with MISRA rules

plat: fix switch statements to comply with MISRA rules

Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.

Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a75539162

plat: fix switch statements to comply with MISRA rules

Ensure (where possible) that switch statements in plat comply with MISRA
rules 16.1 - 16.7.

Change-Id: Ie4a7d2fd10f6141c0cfb89317ea28a755391622f
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>

show more ...

Merge pull request #1224 from masahir0y/gzip

Support GZIP-compressed images for faster loading and verification

Merge pull request #1249 from masahir0y/uniphier

uniphier: fix and improve memory layout

uniphier: get back original BL31/32 location used before BL2-AT-EL3

Commit 247fc0435191 ("uniphier: switch to BL2-AT-EL3 and remove BL1
support") accidentally changed the location of BL31 and BL32.

uniphier: get back original BL31/32 location used before BL2-AT-EL3

Commit 247fc0435191 ("uniphier: switch to BL2-AT-EL3 and remove BL1
support") accidentally changed the location of BL31 and BL32. The
new memory map overlaps with the audio DSP images, also gives impact
to OP-TEE. They are both out of control of ARM Trusted Firmware, so
not easy to change. This commit restores the image layout that was
originally used prior to the BL2-AT-EL3 migration.

Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: support GZIP-compressed images

Allow to handle GZIP-compressed images by giving FIP_GZIP=1 from the
command line.

- Images are GZIP-compressed, then packed into FIP. If Trusted Board
B

uniphier: support GZIP-compressed images

Allow to handle GZIP-compressed images by giving FIP_GZIP=1 from the
command line.

- Images are GZIP-compressed, then packed into FIP. If Trusted Board
Boot is enabled, certificates are generated based on the compressed
images.

- GZIP decompressor is linked into BL2 to decompress images at
run-time.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

uniphier: add a helper to get image_info

In the next commit, I will have more usecases to get struct image_info
from image ID. It is better to make a helper function at a different
layer. I do not

uniphier: add a helper to get image_info

In the next commit, I will have more usecases to get struct image_info
from image ID. It is better to make a helper function at a different
layer. I do not need the current uniphier_image_descs_fixup() since
the code is small enough to be squashed into the caller side.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

Merge pull request #1232 from masahir0y/uniphier

uniphier: migrate to BL2-AT-EL3