Merge changes from topic "HEAD" into integration

* changes:
feat(synquacer): add FWU Multi Bank Update support
feat(synquacer): add TBBR support
feat(synquacer): add BL2 support
refactor(syn

Merge changes from topic "HEAD" into integration

* changes:
feat(synquacer): add FWU Multi Bank Update support
feat(synquacer): add TBBR support
feat(synquacer): add BL2 support
refactor(synquacer): move common source files

show more ...

feat(synquacer): add BL2 support

Add BL2 support by default. Move the legacy mode behind the
RESET_TO_BL31 define.

Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro

feat(synquacer): add BL2 support

Add BL2 support by default. Move the legacy mode behind the
RESET_TO_BL31 define.

Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Masahisa Kojima <masahisa.kojima@linaro.org>
Cc: Manish V Badarkhe <manish.badarkhe@arm.com>
Cc: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Change-Id: Ic490745a7e8f6114172733428ebd6bd6adfcc1ec
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

show more ...

Merge "refactor(plat/synquacer): update PSCI system_off handling" into integration

refactor(plat/synquacer): update PSCI system_off handling

SynQuacer SoC contains a Cortex-M3 System Control Processor(SCP)
which manages system power.
This commit modifies the PSCI system_off handli

refactor(plat/synquacer): update PSCI system_off handling

SynQuacer SoC contains a Cortex-M3 System Control Processor(SCP)
which manages system power.
This commit modifies the PSCI system_off handling to call SCMI,
same as other PSCI calls. System power-off is done by turing off
the ATX power supply through GPIO, this operation is transferred
to SCP.

Note that this commit modifies only the SCMI case, obsolete SCPI
implementation is not updated.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I6c1009e67cccd1eb5d14c338c3df9103d63709dd

show more ...

Merge pull request #1856 from masahisak/synquacer-scmi-support

plat/synquacer: enable SCMI support

plat/synquacer: enable SCMI support

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific

plat/synquacer: enable SCMI support

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1673 from antonio-nino-diaz-arm/an/headers

Standardise header guards across codebase

Standardise header guards across codebase

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this proje

Standardise header guards across codebase

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1528 from antonio-nino-diaz-arm/an/libc

libc: Cleanup library

libc: Fix all includes in codebase

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb03

libc: Fix all includes in codebase

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1427 from b49020/integration

Add support for Socionext Synquacer SC2A11 SoC based Developerbox platform.

synquacer: Retrieve DRAM info from SCP firmware

Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pa

synquacer: Retrieve DRAM info from SCP firmware

Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pass this info to UEFI via non-secure SRAM.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

show more ...

synquacer: Add MHU driver

Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).

Signed-off-by: Sumit Garg <sumit.garg@lina

synquacer: Add MHU driver

Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

show more ...

synquacer: Enable MMU using xlat_tables_v2 library

BL31 runs from SRAM which is a non-coherent memory on synquacer. So
enable MMU with SRAM memory marked as Non-Cacheable and mark page tables
kept o

synquacer: Enable MMU using xlat_tables_v2 library

BL31 runs from SRAM which is a non-coherent memory on synquacer. So
enable MMU with SRAM memory marked as Non-Cacheable and mark page tables
kept on SRAM as Non-Cacheable via XLAT_TABLE_NC flag. Also add page tables
for Device address space.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

show more ...

synquacer: Enable GICv3 support

synquacer uses GICv3 compliant GIC500. So enable proper GICv3 driver
initialization.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Enable CCN driver support

synquacer has CCN-512 interconnect. So enable proper CCN driver
initialization.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Implement topology functions

These functions describe the layout of the cores and clusters in order
to support the PSCI framework.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>