feat(mt8189): add SPM low power mode

1. Add enable PERI AO.
2. Add infra bus parity re-init.
3. SPM enter 26M.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: Ifbc2d87be47f106857db17c23fb968

feat(mt8189): add SPM low power mode

1. Add enable PERI AO.
2. Add infra bus parity re-init.
3. SPM enter 26M.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: Ifbc2d87be47f106857db17c23fb968aafec150d2

show more ...

fix(mt8189): remove unused SPM definitions and files

Remove unused SPM definitions and files to fix the coverity failure.

1. Remove PMIC_GS_DUMP_VER.
2. Remove CONFIG_MTK_VCOREDVFS_SUPPOR

Signed-o

fix(mt8189): remove unused SPM definitions and files

Remove unused SPM definitions and files to fix the coverity failure.

1. Remove PMIC_GS_DUMP_VER.
2. Remove CONFIG_MTK_VCOREDVFS_SUPPOR

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: I61ff4aa847bf1399b080a3c6ddecf0e3cdcbd724

show more ...

fix(mt8189): fix mt_spm_pmic coverity

The original VCORE_TO_PMIC_VAL(VCORE_0_35V) returns negative number
(VCORE_BASE_UV = 40V) and cause min voltage underflow
(-7 -> 4294967289).

Set_vcore_lp_volt

fix(mt8189): fix mt_spm_pmic coverity

The original VCORE_TO_PMIC_VAL(VCORE_0_35V) returns negative number
(VCORE_BASE_UV = 40V) and cause min voltage underflow
(-7 -> 4294967289).

Set_vcore_lp_volt will become dead code and the below condition is
not met: vol >= 4294967289 and vol <= 56(VCORE_0_75V).

Change min voltage to VCORE_0_45V suggested by designer.

Signed-off-by: irving-ch-lin <irving-ch.lin@mediatek.com>
Change-Id: I8fb33d52d58ba084cc4299ea1f9327c71e4ea9eb

show more ...

feat(mt8189): add EC pin control in SPM

Set EC pin control low/high when SPM suspend/resume.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: Id3360744e52cdcf5613e653cc831740a54140ee4

feat(mt8189): add SPM common driver support

This patch mainly initializes the SPM and provides common APIs for SPM
to enable the use of its various features.

Signed-off-by: Kun Lu <kun.lu@mediatek.

feat(mt8189): add SPM common driver support

This patch mainly initializes the SPM and provides common APIs for SPM
to enable the use of its various features.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: I2b60cc18eafeb21ed08194315f781209a75f2dd7

show more ...

feat(mt8189): add VCORE DVFS drivers

VCORE DVFS is the feature to change VCORE/DDR Freq for power saving
When there are no requests for using VCORE/DRAM, VCORE DVFS will
lower the voltage and freque

feat(mt8189): add VCORE DVFS drivers

VCORE DVFS is the feature to change VCORE/DDR Freq for power saving
When there are no requests for using VCORE/DRAM, VCORE DVFS will
lower the voltage and frequency of VCORE/DRAM to achieve power saving.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: I625e9498c801092a1b2ed9844fe74357c0adaf96

show more ...

feat(mt8189): add SPM basic features support

This patch mainly collects and organizes SPM state information to
facilitate debugging when issues arise.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Ch

feat(mt8189): add SPM basic features support

This patch mainly collects and organizes SPM state information to
facilitate debugging when issues arise.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: I477143c2003ed28040a4c8321bb89f81e6cc49db

show more ...

feat(mt8189): add SPM features support

When the system is in idle or suspend state, SPM will turn off some
unused system resources. This patch enables this feature to achieve
power saving.

Signed-o

feat(mt8189): add SPM features support

When the system is in idle or suspend state, SPM will turn off some
unused system resources. This patch enables this feature to achieve
power saving.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: Ia346c0ea94fa7e427b16c3071ce4eeaa329aab44

show more ...

feat(mt8189): enable PMIC low power setting

During suspend, it is necessary to set some power rails of the PMIC
to enter lower poewer mode to achieve power saving.

Signed-off-by: Kun Lu <kun.lu@med

feat(mt8189): enable PMIC low power setting

During suspend, it is necessary to set some power rails of the PMIC
to enter lower poewer mode to achieve power saving.

Signed-off-by: Kun Lu <kun.lu@mediatek.com>
Change-Id: I922d4f490ecc4db2a7825989d14b62a79f96f80e

show more ...