Merge changes I23f600b5,Icf9ffdf2,Iee7a51d1,I99afc312,I4bf8e8c0, ... into integration

* changes:
plat/marvell/armada: cleanup MSS SRAM if used for copy
plat/marvell: cn913x: allow CP1/CP2 mappin

Merge changes I23f600b5,Icf9ffdf2,Iee7a51d1,I99afc312,I4bf8e8c0, ... into integration

* changes:
plat/marvell/armada: cleanup MSS SRAM if used for copy
plat/marvell: cn913x: allow CP1/CP2 mapping at BLE stage
plat/marvell/armada/common/mss: use MSS SRAM in secure mode
include/drivers/marvell/mochi: add detection of secure mode
plat/marvell: fix SPD handling in dram port
marvell: drivers: move XOR0/1 DIOB from WIN 0 to 1
drivers/marvell/mochi: add support for cn913x in PCIe EP mode
drivers/marvell/mochi: add missing stream IDs configurations
plat/marvell/armada/a8k: support HW RNG by SMC
drivers/rambus: add TRNG-IP-76 driver

show more ...

plat/marvell: cn913x: allow CP1/CP2 mapping at BLE stage

Map IO WIN to CP1 and CP2 at all stages including the BLE.
Do not map CP1/CP2 if CP_NUM is lower than 2 and 3 accordingly.
This patch allows

plat/marvell: cn913x: allow CP1/CP2 mapping at BLE stage

Map IO WIN to CP1 and CP2 at all stages including the BLE.
Do not map CP1/CP2 if CP_NUM is lower than 2 and 3 accordingly.
This patch allows access to CP1/CP2 internal registers at
BLE stage if CP1/CP2 are connected.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Icf9ffdf2e9e3cdc2a153429ffd914cc0005f9eca
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/36939
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>

show more ...

Merge changes from topic "release/14.0" into integration

* changes:
docs: marvell: update PHY porting layer description
docs: marvell: update path in marvell documentation
docs: marvell: updat

Merge changes from topic "release/14.0" into integration

* changes:
docs: marvell: update PHY porting layer description
docs: marvell: update path in marvell documentation
docs: marvell: update build instructions with CN913x
plat: marvell: octeontx: add support for t9130
plat: marvell: t9130: add SVC support
plat: marvell: t9130: update AVS settings
plat: marvell: t9130: pass actual CP count for load_image
plat: marvell: armada: a7k: add support to SVC validation mode
plat: marvell: armada: add support for twin-die combined memory device

show more ...

plat: marvell: octeontx: add support for t9130

CN-9130 has single CP0 inside the package and 2 additional one from MoChi
interface. In case of db-9130-modular board the MCI interface is routed to:
-

plat: marvell: octeontx: add support for t9130

CN-9130 has single CP0 inside the package and 2 additional one from MoChi
interface. In case of db-9130-modular board the MCI interface is routed to:
- on-board CP115 (MCI0)
- extension board CP115 (MCI1)

The board is based on DIMM DDR.

The 9130 has up to 3CP, and decoding windows looks like below:

(free for further use)
.----------. 0xf800 0000
| CP2 CFG |
'----------' 0xf600 0000
| CP1 CFG |
'----------' 0xf400 0000
| CP0 CFG |
'----------' 0xf200 0000
| AP CFG |
'----------' 0xf000 0000
(free for further use)
.----------. 0xec00 0000
| SPI |
| MEM_MAP | (Currently not opened)
'----------' 0xe800 0000
| PEX2_CP2 |
'----------' 0xe700 0000
| PEX1_CP2 |
'----------' 0xe600 0000
| PEX0-CP2 |
'----------'
.----------. 0xe500 0000
| PEX2_CP1 |
'----------' 0xe400 0000
| PEX1_CP1 |
'----------' 0xe300 0000
| PEX0-CP1 |
'----------'
.----------. 0xe200 0000
| PEX2-CP0 |
'----------' 0xe100 0000
| PEX1-CP0 |
'----------' 0xe000 0000
| PEX0-CP0 |
| 512MB |
'----------' 0xc000 0000

Change-Id: Ia8eee4f96c1043753f74f9da437b9f72ce2d6eb0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

show more ...