Merge changes from topic "imx8ulp_support" into integration

* changes:
docs(maintainers): add the maintainers for imx8ulp
docs(imx8ulp): add imx8ulp platform
fix(imx8ulp): increase the mmap re

Merge changes from topic "imx8ulp_support" into integration

* changes:
docs(maintainers): add the maintainers for imx8ulp
docs(imx8ulp): add imx8ulp platform
fix(imx8ulp): increase the mmap region num
feat(imx8ulp): adjust the dram mapped region
feat(imx8ulp): ddrc switch auto low power and software interface
feat(imx8ulp): add some delay before cmc1 access
feat(imx8ulp): add a flag check for the ddr status
fix(imx8ulp): add sw workaround for csi/hotplug test hang
feat(imx8ulp): adjust the voltage when sys dvfs enabled
feat(imx8ulp): enable the DDR frequency scaling support
fix(imx8ulp): fix suspend/resume issue when DBD owner is s400 only
feat(imx8ulp): update XRDC for ELE to access DDR with CA35 DID
feat(imx8ulp): add memory region policy
feat(imx8ulp): protect TEE region for secure access only
feat(imx8ulp): add trusty support
feat(imx8ulp): add OPTEE support
feat(imx8ulp): update the upower config for power optimization
feat(imx8ulp): allow RTD to reset APD through MU
feat(imx8ulp): not power off LPAV PD when LPAV owner is RTD
feat(imx8ulp): add system power off support
feat(imx8ulp): add APD power down mode(PD) support in system suspend
feat(imx8ulp): add the basic support for idle & system suspned
feat(imx8ulp): enable 512KB cache after resume on imx8ulp
feat(imx8ulp): add the initial XRDC support
feat(imx8ulp): allocated caam did for the non secure world
feat(imx8ulp): add i.MX8ULP basic support
build(changelog): add new scopes for nxp imx8ulp platform
feat(scmi): add scmi sensor support

show more ...

feat(imx8ulp): not power off LPAV PD when LPAV owner is RTD

Upower will check the LPAV ownership when power off the SRAM or PS.
if the LPAV owner is not APD, then the power off will return failure.

feat(imx8ulp): not power off LPAV PD when LPAV owner is RTD

Upower will check the LPAV ownership when power off the SRAM or PS.
if the LPAV owner is not APD, then the power off will return failure.
Add similar checking in SCMI PD driver to skip the power off to avoid
failure print causing suspend/resume not work.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I9dc657c2277129ac90a792232f734c08fca5f997

show more ...

feat(imx8ulp): add i.MX8ULP basic support

Add the basic support for i.MX8ULP.

The i.MX 8ULP family of processors features NXP’s advanced
implementation of the dual Arm Cortex-A35 cores alongside
an

feat(imx8ulp): add i.MX8ULP basic support

Add the basic support for i.MX8ULP.

The i.MX 8ULP family of processors features NXP’s advanced
implementation of the dual Arm Cortex-A35 cores alongside
an Arm Cortex-M33. This combined architecture enables the
device to run a rich operating system (such as Linux) on
the Cortex-A35 core and an RTOS (such as FreeRTOS) on the
Cortex-M33 core. It also includes a Cadence Tensilica Fusion
DSP for low-power audio and a HiFi4 DSP for advanced audio
and machine learning applications.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I12df622b95960bcdf7da52e4c66470a700690e36

show more ...