Merge "fix(poplar): use sysctrl module to reset" into integration

fix(poplar): use sysctrl module to reset

Use sysctrl module rather than watchdog0 to reset the entire system.
Sysctrl is more reliable and requires less resources such as clocks and
resets. Doing th

fix(poplar): use sysctrl module to reset

Use sysctrl module rather than watchdog0 to reset the entire system.
Sysctrl is more reliable and requires less resources such as clocks and
resets. Doing this also allows non-secure OS to use the watchdog.

Change-Id: I30ac2780cc70055d81b35e55e35c9cb7f58b40cc
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1673 from antonio-nino-diaz-arm/an/headers

Standardise header guards across codebase

Standardise header guards across codebase

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this proje

Standardise header guards across codebase

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1504 from hzhuang1/migrate_mmc

Migrate mmc

plat/poplar: migrate to mmc framework

Migrate from emmc framework to mmc framework.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Merge pull request #1223 from vchong/poplar_bl1loadsfip

poplar: Enable emmc and recovery build support

poplar: Enable emmc support

Let bl1 and bl2 have the ability to load images from emmc instead of
dram (mmap).

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Shawn Guo <shawn.guo@li

poplar: Enable emmc support

Let bl1 and bl2 have the ability to load images from emmc instead of
dram (mmap).

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>

show more ...

Merge pull request #1190 from vchong/poplar_hisi_review2

poplar: Add BL32 (OP-TEE) support and misc updates

Poplar: Initialize security properties of IP blocks.

The security properties of some IP blocks are configured to secure mode
after reset. This means these IP blocks can only be accessed by cpus
in s

Poplar: Initialize security properties of IP blocks.

The security properties of some IP blocks are configured to secure mode
after reset. This means these IP blocks can only be accessed by cpus
in secure state by default. These should be configured correclty as needed.

Signed-off-by: y00241285 <yyangwei.yangwei@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>

show more ...

poplar: Fix GPIO_MAX

Per
https://github.com/sdrobertw/Poplar/blob/master/HardwareDocs/Processor_Datasheet_v2XX.pdf
there are 13 groups of GPIO controllers, not 12.

Signed-off-by: Victor Chong <vict

poplar: Fix GPIO_MAX

Per
https://github.com/sdrobertw/Poplar/blob/master/HardwareDocs/Processor_Datasheet_v2XX.pdf
there are 13 groups of GPIO controllers, not 12.

Signed-off-by: Victor Chong <victor.chong@linaro.org>

show more ...

Merge pull request #1005 from ldts/v1

Poplar: Initial commit for Poplar E-96Boards

Poplar: Initial commit for Poplar E-96Boards

The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of

Poplar: Initial commit for Poplar E-96Boards

The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of running any commercial set-top solution based on
Linux or Android. Its high performance specification also supports a
premium user experience with up to H.265 HEVC decoding of 4K video at
60 frames per second.

SOC Hisilicon Hi3798CV200
CPU Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB Two USB 2.0 ports One USB 3.0 ports
CONSOLE USB-micro port for console support
ETHERNET 1 GBe Ethernet
PCIE One PCIe 2.0 interfaces
JTAG 8-Pin JTAG
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI 802.11AC 2*2 with Bluetooth
CONNECTORS One connector for Smart Card One connector for TSI

The platform boot sequence is as follows:
l-loader --> arm_trusted_firmware --> u-boot

Repositories:
- https://github.com/Linaro/poplar-l-loader.git
- https://github.com/Linaro/poplar-u-boot.git

U-Boot is also upstream in the project's master branch.

Make sure you are using the correct branch on each one of these
repositories. The definition of "correct" might change over time (at
this moment in time this would be the "latest" branch).

Build Line:
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1
PLAT=poplar BL33=/path/to/u-boot.bin

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>

show more ...