feat(rdfremont): initialize the rse comms driver

Define platform specific API to fetch base address for secure or root
MHUv3 between AP-RSE invoke rse-comms driver initialization bl31
platform setup

feat(rdfremont): initialize the rse comms driver

Define platform specific API to fetch base address for secure or root
MHUv3 between AP-RSE invoke rse-comms driver initialization bl31
platform setup stage.

Signed-off-by: Rohit Mathew <Rohit.Mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Id79bcdb2fda6cdf394f4e02f67d1c1a44d5ddf23

show more ...

feat(rdfremont): helper to initialize rse-comms with AP-RSE MHUv3

Add a helper function to initialize rse_comms on RD-Fremont platforms
with AP-RSE MHUv3 postbox and mailbox register frames.

Signed

feat(rdfremont): helper to initialize rse-comms with AP-RSE MHUv3

Add a helper function to initialize rse_comms on RD-Fremont platforms
with AP-RSE MHUv3 postbox and mailbox register frames.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Ic390517a8810df195a2582793b81afdbff5ffa15

show more ...

feat(neoverse-rd): add MHUv3 channels on third gen multichip platforms

Add MHUv3 doorbell channel information to scmi_channel_plat_info_t for
third generation of multichip Neoverse reference design

feat(neoverse-rd): add MHUv3 channels on third gen multichip platforms

Add MHUv3 doorbell channel information to scmi_channel_plat_info_t for
third generation of multichip Neoverse reference design platforms.

Signed-off-by: Rohit Mathew <Rohit.Mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Ie4ebf47a10f2f6e33c7ecfc8008e30bacc62bf3d

show more ...

feat(neoverse-rd): add MHUv3 doorbell channels on third gen platforms

Define and use a new scmi_channel_plat_info_t structure specific to
third generation Neoverse platforms in order to use MHUv3 do

feat(neoverse-rd): add MHUv3 doorbell channels on third gen platforms

Define and use a new scmi_channel_plat_info_t structure specific to
third generation Neoverse platforms in order to use MHUv3 doorbell
channels. The structure uses the existing mhu_ring_doorbell method for
ring_doorbell implementation.

Signed-off-by: Shriram K <shriram.k@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Icf3be5305df94ba944038a4d4fdf0ccf32168650

show more ...

feat(rdfremont): initialize GPT on GPC SMMU block

GPC SMMU does granule protection checks (GPC) for accesses originating
from the system control block and GIC on RD-Fremont platforms. The GPC
check

feat(rdfremont): initialize GPT on GPC SMMU block

GPC SMMU does granule protection checks (GPC) for accesses originating
from the system control block and GIC on RD-Fremont platforms. The GPC
check on this is disabled by the boot firmware. Configure the GPC SMMU
to enable GPC.

The transactions on GPC SMMU should be allowed during boot stages so
don't perform smmuv3_security_init() for this SMMU instance.

Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: I3400c57fe264582a45c6a26f9dae8c669e8a8047

show more ...

feat(rdfremont): update Root registers page offset for SMMUv3

SMMUv3 with RME on RD-Fremont platform variants supports Root and Realm
register pages. The page offset for Root and Realm register page

feat(rdfremont): update Root registers page offset for SMMUv3

SMMUv3 with RME on RD-Fremont platform variants supports Root and Realm
register pages. The page offset for Root and Realm register pages is a
platform configurable option. Update the Root registers page offset for
RD-Fremont platform variants.

Signed-off-by: Rohit Mathew <Rohit.Mathew@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Change-Id: Ib3df7d7b9e54219d49b4d77a1fc5846096f1c78c

show more ...

feat(rdfremont): enable MTE2 if present on the platform

MTE2 is an optional feature that could be part of platforms based on Arm
V8.5 or above. If this feature is implemented on the platform, lower

feat(rdfremont): enable MTE2 if present on the platform

MTE2 is an optional feature that could be part of platforms based on Arm
V8.5 or above. If this feature is implemented on the platform, lower ELs
could potentially access the feature registers leading to EL3 traps.
Therefore, set MTE2 build option to '2' to enable the feature only if
its implemented on the platform.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: Idc04b7f3851a2481e4c6bea426a3f09be145b899

show more ...

feat(rdfremont): enable SVE for SWD and NS

Enable SVE support for non secure and secure worlds for RD-Fremont
variants.

Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Signed-off-by: Rohit Mathe

feat(rdfremont): enable SVE for SWD and NS

Enable SVE support for non secure and secure worlds for RD-Fremont
variants.

Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: Idcb309d031a1e10740dd365bb65570f8d2ce3a05

show more ...

feat(rdfremont): enable AMU if present on the platform

Set build-option ENABLE_FEAT_AMU to 2 so that AMU is enabled if the
feature is implemented on the platform. This would ensure that lower ELs
co

feat(rdfremont): enable AMU if present on the platform

Set build-option ENABLE_FEAT_AMU to 2 so that AMU is enabled if the
feature is implemented on the platform. This would ensure that lower ELs
could access system registers relevant to AMU registers without causing
a trap to EL3.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I567ac9b0d76b613593d37ea45b4955b423ff5e6c

show more ...

feat(rdfremont): enable MPAM if present on the platform

Set build-option ENABLE_FEAT_MPAM to 2 so that access to MPAM related
registers from lower ELs don't trap to EL3.

Signed-off-by: Rohit Mathew

feat(rdfremont): enable MPAM if present on the platform

Set build-option ENABLE_FEAT_MPAM to 2 so that access to MPAM related
registers from lower ELs don't trap to EL3.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I4c5753c415461e5ffc79e371ae00cc6e6dd087f9

show more ...

feat(rdfremont): add DRAM pas entries in pas table for multichip

RD-Fremont-Cfg2 supports 8 DRAM banks compared to RD-Fremont and
RD-Fremont-Cfg1, which only support 2. So add PAS entries for
all th

feat(rdfremont): add DRAM pas entries in pas table for multichip

RD-Fremont-Cfg2 supports 8 DRAM banks compared to RD-Fremont and
RD-Fremont-Cfg1, which only support 2. So add PAS entries for
all the DRAM banks in the PAS table for RD-Fremont-Cfg2, ensuring proper
access controls to these regions.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: Ib09b44569ea088f35529a1c983d3db727d86e262

show more ...

feat(rdfremont): add implementation for GPT setup

Since GPT setup has been delegated to the platform, add an
implementation for plat_bl2_gpt_setup in accordance with the
specification for RD-Fremont

feat(rdfremont): add implementation for GPT setup

Since GPT setup has been delegated to the platform, add an
implementation for plat_bl2_gpt_setup in accordance with the
specification for RD-Fremont variants.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I1ff47249ce304f1c188850282d92c64cae463383

show more ...

feat(rdfremont): integrate DTS files for RD-Fremont variants

This update incorporates essential device tree (DTS) files for
RD-Fremont variants. The inclusion covers DTS for platform and config
ID,

feat(rdfremont): integrate DTS files for RD-Fremont variants

This update incorporates essential device tree (DTS) files for
RD-Fremont variants. The inclusion covers DTS for platform and config
ID, NT_FW_CONFIG, and TB_FW_CONFIG, enhancing device tree support for
RD-Fremont within the project.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: Ibf898f963d971fe9b07cfa518244c47a8aced81e

show more ...

feat(rdfremont): add support for RD-Fremont-Cfg2

Add board support for RD-Fremont-Cfg2 platform, which is a quad chip
variant of RD-Fremont. Each chip has reduced core count of four CPUs as
compared

feat(rdfremont): add support for RD-Fremont-Cfg2

Add board support for RD-Fremont-Cfg2 platform, which is a quad chip
variant of RD-Fremont. Each chip has reduced core count of four CPUs as
compared to single chip RD-Fremont platform.

Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I9b79f0eef210afecaa15e381414479027617e44a

show more ...

feat(rdfremont): add support for RD-Fremont-Cfg1

Add the required source and header files to support RD-Fremont-Cfg1,
which is a variant of RD-Fremont. RD-Fremont-Cfg1 hosts a smaller mesh
and lower

feat(rdfremont): add support for RD-Fremont-Cfg1

Add the required source and header files to support RD-Fremont-Cfg1,
which is a variant of RD-Fremont. RD-Fremont-Cfg1 hosts a smaller mesh
and lower number of cores when compared with RD-Fremont.

Signed-off-by: Shriram K <shriram.k@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I720b0e76174123c8aab64b39e9468b28614607b9

show more ...

feat(rdfremont): add support for RD-Fremont

Add the required source and header files to support RD-Fremont.
Additionally, create a makefile for building the platform.

Co-developed-by: Harry Moulton

feat(rdfremont): add support for RD-Fremont

Add the required source and header files to support RD-Fremont.
Additionally, create a makefile for building the platform.

Co-developed-by: Harry Moulton <harry.moulton@arm.com>
Signed-off-by: Harry Moulton <harry.moulton@arm.com>
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I03b6913b08d488c86a5f4638ef6cd8b0f5c43a9a

show more ...

feat(neoverse-rd): add multichip pas entries

RD-Fremont-Cfg2, the quad-chip variant of RD-Fremont supports 8 DRAM
banks compared to RD-Fremont and RD-Fremont-Cfg1, which only support 2.
Therefore, d

feat(neoverse-rd): add multichip pas entries

RD-Fremont-Cfg2, the quad-chip variant of RD-Fremont supports 8 DRAM
banks compared to RD-Fremont and RD-Fremont-Cfg1, which only support 2.
Therefore, define PAS entry mappings for all the DRAM banks, so that
they could be utilized on the multichip variant.

Signed-off-by: Rohit Mathew <Rohit.Mathew@arm.com>
Change-Id: Ief235581c0066a95528235b9821646f864e14d3a

show more ...

feat(neoverse-rd): add pas definitions for third gen platforms

Since the GPT setup is now delegated to the platform, each platform
needs to include PAS definitions according to its specifications. T

feat(neoverse-rd): add pas definitions for third gen platforms

Since the GPT setup is now delegated to the platform, each platform
needs to include PAS definitions according to its specifications. This
commit adds PAS definitions specifically tailored for RD-Fremont
variants.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I1a23029a74401fb1faa70bb6c2e66093ed08c45a

show more ...

feat(neoverse-rd): add DRAM layout for third gen platforms

Given the differences in memory map of the third generation reference
design platforms, it is necessary to move away from the common DRAM
l

feat(neoverse-rd): add DRAM layout for third gen platforms

Given the differences in memory map of the third generation reference
design platforms, it is necessary to move away from the common DRAM
layout present as part of arm_def.h. Therefore, introduce definitions
and necessary carveouts within DRAM to define a new DRAM layout for
these platforms.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I79af066f41259f147febdc3c00447db5be995799

show more ...

feat(neoverse-rd): add SRAM layout for third gen platforms

Given the differences in memory map and additional RME requirements for
the V3 CPU based platforms, it is necessary to move away from the c

feat(neoverse-rd): add SRAM layout for third gen platforms

Given the differences in memory map and additional RME requirements for
the V3 CPU based platforms, it is necessary to move away from the common
SRAM layout present as part of arm_def.h. Therefore, introduce
definitions and necessary carveouts within SRAM to define a new SRAM
layout for these platforms.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I2d0ef65abde66da7523dd9e09036c7803978570c

show more ...

feat(neoverse-rd): add firmware definitions for third gen platforms

Add firmware definitions for the third generation of platforms. The
following files are added -

- nrd_css_fw_def3.h: for CSS firm

feat(neoverse-rd): add firmware definitions for third gen platforms

Add firmware definitions for the third generation of platforms. The
following files are added -

- nrd_css_fw_def3.h: for CSS firmware definitions
- nrd_ros_fw_def3.h : for RoS firmware definitions
- nrd_plat_arm_def3.h: for platform port macros

All the common files for these platforms are housed under nrd3
directory.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I085d609cfe1686d28d1c467fb34d45af47e00eb6

show more ...

feat(neoverse-rd): add RoS definitions for third gen platforms

Add RoS definitions for third generation of platforms. Common
definitions for such platforms would be housed in the nrd3 directory
unde

feat(neoverse-rd): add RoS definitions for third gen platforms

Add RoS definitions for third generation of platforms. Common
definitions for such platforms would be housed in the nrd3 directory
under includes.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I2062c71676f27b4d17a3069b955565670f62a76c

show more ...

feat(neoverse-rd): add CSS definitions for third gen platforms

Add CSS definitions for the third generation of reference design
platforms. Common definitions for such platforms would be housed in th

feat(neoverse-rd): add CSS definitions for third gen platforms

Add CSS definitions for the third generation of reference design
platforms. Common definitions for such platforms would be housed in the
nrd3 directory under includes.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: Id271ebdf5dcc1d7b598606c313208ab85662795d

show more ...

refactor(juno): add explicit entry for HW_CONFIG in BL2 CoT file

Add an explicit entry for HW_CONFIG in the BL2 CoT file for the Juno
platform, as the HW_CONFIG node has been removed from the common

refactor(juno): add explicit entry for HW_CONFIG in BL2 CoT file

Add an explicit entry for HW_CONFIG in the BL2 CoT file for the Juno
platform, as the HW_CONFIG node has been removed from the common CoT
file.

Change-Id: I8a1a22dd1023895cfc5730101fad20a80390ce17
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

refactor(fvp): add CoT desc dtsi

Adding CoT descriptor dtsi file to streamline fvp_tb_fw_config DTB file.

Change-Id: I0bbaef764b100ed0e749ec5f0c78a366398b3519
Signed-off-by: Lauren Wehrmeister <lau

refactor(fvp): add CoT desc dtsi

Adding CoT descriptor dtsi file to streamline fvp_tb_fw_config DTB file.

Change-Id: I0bbaef764b100ed0e749ec5f0c78a366398b3519
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

show more ...