| 20ff991e | 04-Jun-2020 |
Javier Almansa Sobrino <javier.almansasobrino@arm.com> |
arm_fpga: Add support to populate the CPU nodes in the DTB
At the moment BL31 dynamically discovers the CPU topology of an FPGA
system at runtime, but does not export it to the non-secure world.
Any
arm_fpga: Add support to populate the CPU nodes in the DTB
At the moment BL31 dynamically discovers the CPU topology of an FPGA
system at runtime, but does not export it to the non-secure world.
Any BL33 user would typically looks at the devicetree to learn about
existing CPUs.
This patch exports a minimum /cpus node in a devicetree to satisfy
the binding. This means that no cpumaps or caches are described.
This could be added later if needed.
An existing /cpus node in the DT will make the code bail out with a
message.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I589a2b3412411a3660134bdcef3a65e8200e1d7e
show more ...
|
| 3ab336a1 | 23-Aug-2020 |
Anders Dellien <anders.dellien@arm.com> |
plat/arm: Add dependencies to configuration files
This patch adds dependencies to the generated configuration
files that are included in the FIP. This fixes occasional
build errors that occur when t
plat/arm: Add dependencies to configuration files
This patch adds dependencies to the generated configuration
files that are included in the FIP. This fixes occasional
build errors that occur when the FIP happens to be built first.
Change-Id: I5a2bf724ba3aee13954403b141f2f19b4fd51d1b
Signed-off-by: Anders Dellien <anders.dellien@arm.com>
show more ...
|
| 14d095c3 | 23-Aug-2020 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
plat/arm: Get the base address of nv-counters from device tree
Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device
plat/arm: Get the base address of nv-counters from device tree
Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device tree and retrieved during run-time. This feature is
enabled using the build option COT_DESC_IN_DTB.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I236f532e63cea63b179f60892cb406fc05cd5830
show more ...
|
| 0df3eb70 | 31-Jul-2020 |
Sayanta Pattanayak <sayanta.pattanayak@arm.com> |
n1sdp: remote chip SPI numbering for multichip GIC routing
Allocated 512-959 SPI numbers for remote n1sdp chip and same has been
referenced for GIC routing table.
Change-Id: Id79ea493fd665ed93fe964
n1sdp: remote chip SPI numbering for multichip GIC routing
Allocated 512-959 SPI numbers for remote n1sdp chip and same has been
referenced for GIC routing table.
Change-Id: Id79ea493fd665ed93fe9644a59e363ec10441098
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
show more ...
|
| 2111b002 | 12-Jun-2020 |
Olivier Deprez <olivier.deprez@arm.com> |
SPMC: manifest changes to support multicore boot
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Icf90c2ccce75257908ba3d470392
SPMC: manifest changes to support multicore boot
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: Icf90c2ccce75257908ba3d4703926041d64b1dd3
show more ...
|
| 9de91c75 | 17-Jul-2020 |
Ruari Phipps <ruari.phipps@arm.com> |
SPM: Add third cactus partition to manifests
Add information about the third partition so it can be loaded into SPM
when running the tests
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-
SPM: Add third cactus partition to manifests
Add information about the third partition so it can be loaded into SPM
when running the tests
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I5544e88df391ef294ddf6b5750d468d3e74892b1
show more ...
|
| 3f34663f | 04-Aug-2020 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
plat/arm: juno: Implement methods to retrieve soc-id information
Implemented platform functions to retrieve the soc-id information
for juno platform
Change-Id: Ie677120710b45e202a2d63a954459ece8a64
plat/arm: juno: Implement methods to retrieve soc-id information
Implemented platform functions to retrieve the soc-id information
for juno platform
Change-Id: Ie677120710b45e202a2d63a954459ece8a64b353
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
show more ...
|
| ed9653ff | 04-Aug-2020 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
plat/arm: fvp: Implement methods to retrieve soc-id information
Implemented platform functions to retrieve the soc-id information
for FVP platform.
Change-Id: Id3df02ab290a210310e8d34ec9d706a59d817
plat/arm: fvp: Implement methods to retrieve soc-id information
Implemented platform functions to retrieve the soc-id information
for FVP platform.
Change-Id: Id3df02ab290a210310e8d34ec9d706a59d817517
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
show more ...
|
| 0d4ad1fe | 17-Aug-2020 |
Mark Dykes <mardyk01@review.trustedfirmware.org> |
Merge "plat/arm: Use common build flag for using generic sp804 driver" into integration |
| fddfb3ba | 12-Aug-2020 |
Madhukar Pappireddy <madhukar.pappireddy@arm.com> |
plat/arm: Use common build flag for using generic sp804 driver
SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_
plat/arm: Use common build flag for using generic sp804 driver
SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.
This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.
Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
show more ...
|
| b693fbf4 | 14-Aug-2020 |
Manish Pandey <manish.pandey2@arm.com> |
Merge changes from topic "sp_dual_signing" into integration
* changes:
SPM: Add owner field to cactus secure partitions
SPM: Alter sp_gen.mk entry depending on owner of partition
plat/arm: ena
Merge changes from topic "sp_dual_signing" into integration
* changes:
SPM: Add owner field to cactus secure partitions
SPM: Alter sp_gen.mk entry depending on owner of partition
plat/arm: enable support for Plat owned SPs
show more ...
|
| ad86d35a | 11-Aug-2020 |
Ruari Phipps <ruari.phipps@arm.com> |
SPM: Add owner field to cactus secure partitions
For supporting dualroot CoT for Secure Partitions a new optional field
"owner" is introduced which will be used to sign the SP with
corresponding sig
SPM: Add owner field to cactus secure partitions
For supporting dualroot CoT for Secure Partitions a new optional field
"owner" is introduced which will be used to sign the SP with
corresponding signing domain. To demonstrate its usage, this patch adds
owners to cactus Secure Partitions.
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I7b760580355fc92edf5402cecc38c38125dc1cae
show more ...
|
| 92069086 | 06-Aug-2020 |
Jimmy Brisson <jimmy.brisson@arm.com> |
Use true instead of 1 in while
This resolves MISRA defects such as:
plat/common/plat_bl1_common.c:63:[MISRA C-2012 Rule 14.4 (required)]
The condition expression "1" does not have an essent
Use true instead of 1 in while
This resolves MISRA defects such as:
plat/common/plat_bl1_common.c:63:[MISRA C-2012 Rule 14.4 (required)]
The condition expression "1" does not have an essentially boolean type.
Change-Id: I679411980ad661191fbc834a44a5eca5494fd0e2
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
show more ...
|
| 8dd1c3c6 | 04-Aug-2020 |
Madhukar Pappireddy <madhukar.pappireddy@arm.com> |
Merge "spm-mm: fix MISRA C-2012 Rule 2.3 spm_mm_boot_info_t defined but never used." into integration |
| 070632f9 | 04-Aug-2020 |
Manish Pandey <manish.pandey2@arm.com> |
Merge "SPM: build OP-TEE as an S-EL1 Secure Partition" into integration |
| 9d9ae976 | 30-Jul-2020 |
Olivier Deprez <olivier.deprez@arm.com> |
spm-mm: fix MISRA C-2012 Rule 2.3 spm_mm_boot_info_t defined but never used.
Following merge of patchset [1] the spm_mm_boot_info_t structure is
included in few platform files unconditionally even w
spm-mm: fix MISRA C-2012 Rule 2.3 spm_mm_boot_info_t defined but never used.
Following merge of patchset [1] the spm_mm_boot_info_t structure is
included in few platform files unconditionally even when SPM_MM option
is disabled.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/2647
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I68bc034c9348b5d9bcfd2e5217b781df5ad1b369
show more ...
|
| fa30f73b | 07-Jul-2020 |
Andre Przywara <andre.przywara@arm.com> |
arm_fpga: Support uploading a custom command line
The command line for BL33 payloads is typically taken from the DTB. On
"normal" systems the bootloader will put the right version in there, but
we t
arm_fpga: Support uploading a custom command line
The command line for BL33 payloads is typically taken from the DTB. On
"normal" systems the bootloader will put the right version in there, but
we typically don't use one on the FPGAs.
To avoid editing (and possibly re-packaging) the DTB for every change in
the command line, try to read it from some "magic" memory location
instead. It can be easily placed there by the tool that uploads the
other payloads to the FPGA's memory. BL31 will then replace the existing
command line in the DTB with that new string.
To avoid reading garbage, check the memory location for containing a
magic value. This is conveniently chosen to be a simple ASCII string, so
it can just preceed the actual command line in a text file:
--------------------------------
CMD:console=ttyAMA0,38400n8 debug loglevel=8
--------------------------------
Change-Id: I5923a80332c9fac3b4afd1a6aaa321233d0f60da
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
show more ...
|
| db1ef41a | 01-Apr-2020 |
Olivier Deprez <olivier.deprez@arm.com> |
SPM: build OP-TEE as an S-EL1 Secure Partition
Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.
Increase ARM_SP_MAX_SIZE to cope with
SPM: build OP-TEE as an S-EL1 Secure Partition
Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.
Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb
show more ...
|
| 000653b4 | 06-Jul-2020 |
Andre Przywara <andre.przywara@arm.com> |
fdts: n1sdp: DTS file for single-chip and multi-chip environment.
N1SDP supports both single-chip and multi-chip environment.
Added DTS file for both type of environment.
Enabled DTS files compilat
fdts: n1sdp: DTS file for single-chip and multi-chip environment.
N1SDP supports both single-chip and multi-chip environment.
Added DTS file for both type of environment.
Enabled DTS files compilation for N1SDP platform.
Change-Id: I66af88dcfb841893eb6ed2ca18d3025de81236a0
Co-authored-by: Robin Murphy <Robin.Murphy@arm.com>
Co-authored-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
Co-authored-by: Manoj Kumar <manoj.kumar3@arm.com>
Co-authored-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
show more ...
|
| 727bbf68 | 13-May-2020 |
Javier Almansa Sobrino <javier.almansasobrino@arm.com> |
arm_fpga: Add support for topology self-discovery
As secondary cores show up, they populate an array to
announce themselves so plat_core_pos_by_mpidr() can
return an invalid COREID code for any non-
arm_fpga: Add support for topology self-discovery
As secondary cores show up, they populate an array to
announce themselves so plat_core_pos_by_mpidr() can
return an invalid COREID code for any non-existing
MPIDR that it is queried about.
The Power Domain Tree Description is populated with
a topology based on the maximum harcoded values.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I8fd64761a2296714ce0f37c46544f3e6f13b5f61
show more ...
|
| a07c101a | 16-Jul-2020 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
plat/arm: Move fconf population after the enablement of MMU
In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after
plat/arm: Move fconf population after the enablement of MMU
In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284
show more ...
|
| 4a135bc3 | 13-Jul-2020 |
Alexei Fedorov <Alexei.Fedorov@arm.com> |
plat/arm/board/fvp: Add support for Measured Boot
This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event
plat/arm/board/fvp: Add support for Measured Boot
This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event Log address and
it size
'tpm_event_log_sm_addr'
'tpm_event_log_addr'
'tpm_event_log_size'
in 'event_log.dtsi' included in 'fvp_tsp_fw_config.dts'
and 'fvp_nt_fw_config.dts'. The node and its properties
are described in binding document
'docs\components\measured_boot\event_log.rst'.
Change-Id: I087e1423afcb269d6cfe79c1af9c348931991292
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
show more ...
|
| d6546575 | 21-Jul-2020 |
Manish Pandey <manish.pandey2@arm.com> |
Merge changes from topic "rddaniel_rotpk" into integration
* changes:
plat/arm/rddanielxlr: add platform function to return ROTPK
plat/arm/rddaniel: add platform function to return ROTPK |
| 0ae9bc27 | 14-Jul-2020 |
Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com> |
plat/arm/rddanielxlr: add platform function to return ROTPK
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
plat/arm/rddanielxlr: add platform function to return ROTPK
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel Config-XLR platform to support Trusted Board Boot. The
function makes use of the wrapper function provided by the arm common
trusted board boot function to get the ROTPK hash.
Change-Id: I509e2f7e88cc2167e1732a971d71dc131d3d4b01
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
show more ...
|
| 98e9dcf5 | 14-Jul-2020 |
Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com> |
plat/arm/rddaniel: add platform function to return ROTPK
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
sto
plat/arm/rddaniel: add platform function to return ROTPK
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel platform to support Trusted Board Boot. The function makes use
of the wrapper function provided by the arm common trusted board boot
function to get the ROTPK hash.
Change-Id: I6c2826a7898664afea19fd62432684cfddd9319a
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
show more ...
|