arm: Shorten the Firmware Update (FWU) process

The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.

For the FVP and Juno platfor

arm: Shorten the Firmware Update (FWU) process

The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.

For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.

There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.

Tested on Juno.

Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

show more ...

Merge changes from topic "aa-sbsa-watchdog" into integration

* changes:
plat/arm: introduce wrapper functions to setup secure watchdog
drivers/sbsa: add sbsa watchdog driver

plat/arm: introduce wrapper functions to setup secure watchdog

The BL1 stage setup code for ARM platforms sets up the SP805 watchdog
controller as the secure watchdog. But not all ARM platforms use

plat/arm: introduce wrapper functions to setup secure watchdog

The BL1 stage setup code for ARM platforms sets up the SP805 watchdog
controller as the secure watchdog. But not all ARM platforms use SP805
as the secure watchdog controller.

So introduce two new ARM platform code specific wrapper functions to
start and stop the secure watchdog. These functions then replace the
calls to SP805 driver in common BL1 setup code. All the ARM platforms
implement these wrapper functions by either calling into SP805 driver
or the SBSA watchdog driver.

Change-Id: I1a9a11b124cf3fac2a84f22ca40acd440a441257
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

show more ...

Merge pull request #1845 from ambroise-arm/av/errata

Apply workarounds for errata of Cortex-A53, A55 and A57

juno: Enable CPU errata workarounds

Change-Id: I7593f5ed89b9ef13b510e2259c909838c64ec56c
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

Merge pull request #1784 from antonio-nino-diaz-arm/an/includes-arm

plat/arm: Cleanup of includes and drivers

plat/arm: sds: Move to drivers/ folder

Change-Id: Ia601d5ad65ab199e747fb60af4979b7db477d249
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

plat/arm: scmi: Move to drivers/ folder

Change-Id: I8989d2aa0258bf3b50a856c5b81532d578600124
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

plat/arm: Move dynamic xlat enable logic to makefile

The PLAT_XLAT_TABLES_DYNAMIC build option, defined in platform_def.h
in Arm platforms, is checked by several headers, affecting their
behaviour.

plat/arm: Move dynamic xlat enable logic to makefile

The PLAT_XLAT_TABLES_DYNAMIC build option, defined in platform_def.h
in Arm platforms, is checked by several headers, affecting their
behaviour. To avoid issues around the include ordering of the headers,
the definition should be moved to the platform's makefile.

Change-Id: I0e12365c8d66309122e8a20790e1641a4f480a10
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1742 from sandrine-bailleux-arm/sb/fix-arm-mk

Fix a variable expansion in Arm platform makefiles

Fix a variable expansion in Arm platform makefiles

The top level makefile defines the PLAT variable, not PLATFORM.
This mistake was causing an empty variable expansion and showing an
incomplete erro

Fix a variable expansion in Arm platform makefiles

The top level makefile defines the PLAT variable, not PLATFORM.
This mistake was causing an empty variable expansion and showing an
incomplete error message.

Change-Id: I5da1275c73c61a7c1823643a76300f255841719d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

show more ...

Merge pull request #1701 from chandnich/psci-ops

remove weak implemention of 'plat_arm_psci_override_pm_ops'

plat/arm: remove weak implemention of 'plat_arm_psci_override_pm_ops' function

In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation

plat/arm: remove weak implemention of 'plat_arm_psci_override_pm_ops' function

In order to allow Arm platforms to override the default list of PSCI
callbacks, remove the existing weak implementation of
'plat_arm_psci_override_pm_ops' function and let all the Arm platforms
implement their own 'plat_arm_psci_override_pm_ops' function.

For platforms that support SCMI protocol, the function
'css_scmi_override_pm_ops' can be additionally used as well to
override the default PSCI callbacks.

Change-Id: If7c27468bd51a00ea9c2a3716b5894163f5a9f3c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

show more ...

Merge pull request #1696 from satheesbalya-arm/sb1/sb1_2406_romlib_juno

romlib: Add juno support for romlib

juno: Add romlib support

This patch adds support to build a combined BL1
and ROMLIB binary file with the right page
alignment in Juno. When USE_ROMLIB=1 is set for
Juno, it generates the combined fi

juno: Add romlib support

This patch adds support to build a combined BL1
and ROMLIB binary file with the right page
alignment in Juno. When USE_ROMLIB=1 is set for
Juno, it generates the combined file
bl1_romlib.bin which needs to be used instead of
bl1.bin

Change-Id: I407efbe48d3e522fa6ef855538a9587193cb1919
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

show more ...

Merge pull request #1628 from antonio-nino-diaz-arm/an/sharing

plat/arm: Small reorganization of platform code

Merge pull request #1619 from antonio-nino-diaz-arm/an/norflash

plat/arm: Move norflash driver to drivers/ folder

plat/arm: Move board_css_common.c to juno folder

This file is only used by Juno as all other CSS platforms have their own
private memory maps.

Change-Id: I1c9f27aac7b1d8bff4d92674e8bde5505b93c8c4
S

plat/arm: Move board_css_common.c to juno folder

This file is only used by Juno as all other CSS platforms have their own
private memory maps.

Change-Id: I1c9f27aac7b1d8bff4d92674e8bde5505b93c8c4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1620 from deepan02/deepak-arm/move-reset-to-bl31

plat/arm: allow RESET_TO_BL31 for CSS-based platforms

plat/arm: Move norflash driver to drivers/ folder

This way it can be reused by other platforms if needed.

Note that this driver is designed to work with the Versatile Express NOR
flash of Juno and

plat/arm: Move norflash driver to drivers/ folder

This way it can be reused by other platforms if needed.

Note that this driver is designed to work with the Versatile Express NOR
flash of Juno and FVP. In said platforms, the memory is organized as an
interleaved memory of two chips with a 16 bit word.

Any platform that wishes to reuse it with a different configuration will
need to modify the driver so that it is more generic.

Change-Id: Ic721758425864e0cf42b7b9b04bf0d9513b6022e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

plat/arm: allow RESET_TO_BL31 for CSS-based platforms

This lets any future CSS platforms to use RESET_TO_BL31 flag.

Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey

plat/arm: allow RESET_TO_BL31 for CSS-based platforms

This lets any future CSS platforms to use RESET_TO_BL31 flag.

Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>

show more ...

Merge pull request #1597 from antonio-nino-diaz-arm/an/optimise

plat/arm: Remove option ARM_BOARD_OPTIMISE_MEM

plat/arm: Remove option ARM_BOARD_OPTIMISE_MEM

This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. Th

plat/arm: Remove option ARM_BOARD_OPTIMISE_MEM

This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. The best thing to do is to remove it and move the definition to
each platform's header.

FVP, SGI and SGM were using the definitions in board_arm_def.h. The
definitions have been copied to each platform's platform_def.h. Juno
was already using the ones in platform_def.h, so there have been no
changes.

Change-Id: I9aecd11bbc72a3d0d7aad1ef9934d8df21dcfaf2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated

Remove deprecated interfaces for all platforms

plat/arm: Migrate to new interfaces

- Remove references to removed build options.
- Remove support for legacy GIC driver.
- Remove support for LOAD_IMAGE_V2=0.

Change-Id: I72f8c05620bdf4a682765e6e5

plat/arm: Migrate to new interfaces

- Remove references to removed build options.
- Remove support for legacy GIC driver.
- Remove support for LOAD_IMAGE_V2=0.

Change-Id: I72f8c05620bdf4a682765e6e53e2c04ca749a3d5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...