Merge changes from topic "tonnad01/gcc_warn_fix" into integration

* changes:
fix(scmi): change function prototype to fix gcc error
fix(rdn1edge): change variable type to fix gcc sign conversion

Merge changes from topic "tonnad01/gcc_warn_fix" into integration

* changes:
fix(scmi): change function prototype to fix gcc error
fix(rdn1edge): change variable type to fix gcc sign conversion error

show more ...

fix(scmi): change function prototype to fix gcc error

Change function prototype of plat_css_get_scmi_info() to fix the GCC
sign conversion error "comparison between signed and unsigned integer
expre

fix(scmi): change function prototype to fix gcc error

Change function prototype of plat_css_get_scmi_info() to fix the GCC
sign conversion error "comparison between signed and unsigned integer
expressions". Changing channel_id type to unsigned int since it can
never be a negative value.

Signed-off-by: Tony K Nadackal <tony.nadackal@arm.com>
Change-Id: I579b21497329db40897c10d86c8fc68e4877f3db

show more ...

Merge changes from topics "rddaniel", "rdn1edge_dual" into integration

* changes:
plat/arm: add board support for rd-daniel platform
plat/arm/sgi: move GIC related constants to board files
pla

Merge changes from topics "rddaniel", "rdn1edge_dual" into integration

* changes:
plat/arm: add board support for rd-daniel platform
plat/arm/sgi: move GIC related constants to board files
platform/arm/sgi: add multi-chip mode parameter in HW_CONFIG dts
board/rdn1edge: add support for dual-chip configuration
drivers/arm/scmi: allow use of multiple SCMI channels
drivers/mhu: derive doorbell base address
plat/arm/sgi: include AFF3 affinity in core position calculation
plat/arm/sgi: add macros for remote chip device region
plat/arm/sgi: add chip_id and multi_chip_mode to platform variant info
plat/arm/sgi: move bl31_platform_setup to board file

show more ...

drivers/arm/scmi: allow use of multiple SCMI channels

On systems that have multiple platform components that can interpret the
SCMI messages, there is a need to support multiple SCMI channels (one
e

drivers/arm/scmi: allow use of multiple SCMI channels

On systems that have multiple platform components that can interpret the
SCMI messages, there is a need to support multiple SCMI channels (one
each to those platform components). Extend the existing SCMI interface
that currently supports only a single SCMI channel to support multiple
SCMI channels.

Change-Id: Ice4062475b903aef3b5e5bc37df364c9778a62c5
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>

show more ...

Merge pull request #1886 from ambroise-arm/av/static-checks

Fix extra compilation warnings

Remove several warnings reported with W=1

Improved support for W=1 compilation flag by solving missing-prototypes
and old-style-definition warnings.

The libraries are compiling with warnings (which

Remove several warnings reported with W=1

Improved support for W=1 compilation flag by solving missing-prototypes
and old-style-definition warnings.

The libraries are compiling with warnings (which turn into errors with
the Werror flag).

Outside of libraries, some warnings cannot be fixed without heavy
structural changes.

Change-Id: I1668cf99123ac4195c2a6a1d48945f7a64c67f16
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

show more ...

Merge pull request #1784 from antonio-nino-diaz-arm/an/includes-arm

plat/arm: Cleanup of includes and drivers

plat/arm: mhu: Move to drivers/ folder

Change-Id: I656753a1825ea7340a3708b950fa6b57455e9056
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

plat/arm: scmi: Move to drivers/ folder

Change-Id: I8989d2aa0258bf3b50a856c5b81532d578600124
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

plat/arm: Sanitise includes

Use full include paths like it is done for common includes.

This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned co

plat/arm: Sanitise includes

Use full include paths like it is done for common includes.

This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.

Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1756 from antonio-nino-diaz-arm/an/header-deps

plat/arm: Fix header dependencies

plat/arm: Fix header dependencies

From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platf

plat/arm: Fix header dependencies

From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platform_def.h, and shouldn't be used by other files. Only
platform_def.h should be included in other files. This will ensure that all
needed definitions are present, rather than needing to include all the
headers in all the definitions' headers just in case.

This also prevents problems like cyclic dependencies.

Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1663 from sudeep-holla/scpi_build_fix

plat: juno: fix build for !CSS_USE_SCMI_DRIVER

plat: juno: fix build for !CSS_USE_SCMI_DRIVER

When CSS_USE_SCMI_DRIVER is not defined or set to 0, we get the
following build error.

plat/arm/board/juno/juno_topology.c:16:19: error: ‘CSS_SCMI_PAY

plat: juno: fix build for !CSS_USE_SCMI_DRIVER

When CSS_USE_SCMI_DRIVER is not defined or set to 0, we get the
following build error.

plat/arm/board/juno/juno_topology.c:16:19: error: ‘CSS_SCMI_PAYLOAD_BASE’ undeclared here (not in a function)
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE,
^~~~~~~~~~~~~~~~~~~~~
plat/arm/board/juno/juno_topology.c:17:38: error: ‘CSS_SCMI_MHU_DB_REG_OFF’ undeclared here (not in a function)
.db_reg_addr = PLAT_CSS_MHU_BASE + CSS_SCMI_MHU_DB_REG_OFF,
^~~~~~~~~~~~~~~~~~~~~~~
CSS_CPU_PWR_STATE_OFF

Fix the error in order to get function legacy SCPI support functional.

Change-Id: I00cb80db9968aa0be546e33a3a682a2db87719be
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

show more ...

Merge pull request #1639 from chandnich/scmi-update

plat/arm/scmi: introduce plat_css_get_scmi_info API

plat/arm/scmi: introduce plat_css_get_scmi_info API

The default values of 'plat_css_scmi_plat_info' is not applicable for
all the platforms. There should be a provision to let platform code to
regis

plat/arm/scmi: introduce plat_css_get_scmi_info API

The default values of 'plat_css_scmi_plat_info' is not applicable for
all the platforms. There should be a provision to let platform code to
register a platform specific instance of scmi_channel_plat_info_t.

Add a new API 'plat_css_get_scmi_info' which lets the platform to
register a platform specific instance of scmi_channel_plat_info_t and
remove the default values.

In addition to this, the existing 'plat_css_scmi_plat_info' structure
is removed from the common code and instantiated for the platforms that
need it. This allows for a consistent provisioning of the SCMI channel
information across all the existing and upcoming platforms.

Change-Id: I4fb65d7f2f165b78697b4677f1e8d81edebeac06
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>

show more ...

Merge pull request #1606 from satheesbalya-arm/sb1_2603_misra_plat

plat/arm: Fix misra warnings in platform code

plat/arm: Fix misra warnings in platform code

Change-Id: Ica944acc474a099219d50b041cfaeabd4f3d362f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>

Merge pull request #1282 from robertovargas-arm/misra-changes

Misra changes

Fix MISRA rule 8.4 Part 2

Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined

Fixed for:
make DEBUG=1 PLAT=juno LOG_LEVEL=50 a

Fix MISRA rule 8.4 Part 2

Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined

Fixed for:
make DEBUG=1 PLAT=juno LOG_LEVEL=50 all

Change-Id: Ic8f611da734f356566e8208053296e6c62b54709
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

Merge pull request #963 from soby-mathew/sm/scmi_dev

Add SCMI power domain and system power protocol support

Add SCMI support for Juno platform

This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_ma

Add SCMI support for Juno platform

This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_map` array.

Change-Id: I0d2bb2a719ff5b6a9d8e22e91e1625ab14453665
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

show more ...

Merge pull request #925 from dp-arm/dp/spdx

Use SPDX license identifiers