Merge changes I2c4e826f,I388e8dcd,I6fd20225 into integration

* changes:
chore(ethos-n): use non blocking soft reset on npu
docs(ethos-n): update build-options.rst
refactor(ethos-n): move build

Merge changes I2c4e826f,I388e8dcd,I6fd20225 into integration

* changes:
chore(ethos-n): use non blocking soft reset on npu
docs(ethos-n): update build-options.rst
refactor(ethos-n): move build flags to ethosn_npu.mk

show more ...

refactor(ethos-n): move build flags to ethosn_npu.mk

The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
fla

refactor(ethos-n): move build flags to ethosn_npu.mk

The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
flags are renamed and moved to ethosn_npu.mk. Other source and make
files are changed to reflect the changes in these flags.

Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I6fd20225343c574cb5ac1f0f32ff2fc28ef37ea6

show more ...

Merge changes from topic "ethos-n" into integration

* changes:
docs(maintainers): update NPU driver files
docs(ethos-n): update porting-guide.rst for NPU
feat(ethos-n): add separate RO and RW

Merge changes from topic "ethos-n" into integration

* changes:
docs(maintainers): update NPU driver files
docs(ethos-n): update porting-guide.rst for NPU
feat(ethos-n): add separate RO and RW NSAIDs
feat(ethos-n)!: add protected NPU firmware setup
feat(ethos-n): add stream extends and attr support
feat(ethos-n): add reserved memory address support
feat(ethos-n): add event and aux control support
feat(ethos-n): add SMC call to get FW properties
refactor(ethos-n): split up SMC call handling
feat(ethos-n): add NPU firmware validation
feat(ethos-n): add check for NPU in SiP setup
feat(ethos-n)!: load NPU firmware at BL2
feat(juno): support ARM_IO_IN_DTB option for Juno
fix(fconf): fix FCONF_ARM_IO_UUID_NUMBER value
fix(fvp): incorrect UUID name in FVP tb_fw_config
fix(ethos-n): add workaround for erratum 2838783
feat(ethos-n): add support for NPU to cert_create
feat(ethos-n): add NPU support in fiptool
feat(ethos-n): add support to set up NSAID
build(fiptool): add object dependency generation
feat(ethos-n): add NPU sleeping SMC call
feat(ethos-n): add multiple asset allocators
feat(ethos-n): add reset type to reset SMC calls
feat(ethos-n): add protected NPU TZMP1 regions
build(ethos-n): add TZMP1 build flag

show more ...

feat(ethos-n)!: load NPU firmware at BL2

BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.

Includes support for TRUSTED_BOA

feat(ethos-n)!: load NPU firmware at BL2

BL2 on Juno now loads the Arm(R) Ethos(TM)-N NPU firmware into a fixed
address, using the existing image loading framework.

Includes support for TRUSTED_BOARD_BOOT, if enabled, using the firmware
content and key certificates from the FIP.

Supports the ARM_IO_IN_DTB option so can specify the firmware location
from the dtb rather than it being hardcoded to the FIP

Update makefile to automatically embed the appropriate images into the
FIP.

BREAKING CHANGE: Building the FIP when TZMP1 support is enabled in the
NPU driver now requires a parameter to specify the NPU firmware file.

Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I8cd64fb20d58f8bd539facb085606213d6cead06

show more ...

feat(juno): support ARM_IO_IN_DTB option for Juno

Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size o

feat(juno): support ARM_IO_IN_DTB option for Juno

Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size of the tb_fw-config image accordingly, as the new entries
enlarge that image(new size is 2,116 bytes, rounded up to 2,560 =
0xA00)

Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I557bca7dd32c3be084bbba11d84dfa2818cb6789

show more ...

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/a

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/arm: Load and populate fw_config and tb_fw_config
fconf: Handle error from fconf_load_config
plat/arm: Update the fw_config load call and populate it's information
fconf: Allow fconf to load additional firmware configuration
fconf: Clean confused naming between TB_FW and FW_CONFIG
tbbr/dualroot: Add fw_config image in chain of trust
cert_tool: Update cert_tool for fw_config image support
fiptool: Add fw_config in FIP
plat/arm: Rentroduce tb_fw_config device tree

show more ...

plat/arm: Rentroduce tb_fw_config device tree

Moved BL2 configuration nodes from fw_config to newly
created tb_fw_config device tree.

fw_config device tree's main usage is to hold properties shared

plat/arm: Rentroduce tb_fw_config device tree

Moved BL2 configuration nodes from fw_config to newly
created tb_fw_config device tree.

fw_config device tree's main usage is to hold properties shared
across all BLx images.
An example is the "dtb-registry" node, which contains the
information about the other device tree configurations
(load-address, size).

Also, Updated load-address of tb_fw_config which is now located
after fw_config in SRAM.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ic398c86a4d822dacd55b5e25fd41d4fe3888d79a

show more ...

Merge changes from topic "lm/juno_dyn_cfg" into integration

* changes:
Juno: Use shared mbedtls heap between bl1 and bl2
Juno: add basic support for dynamic config

Juno: Use shared mbedtls heap between bl1 and bl2

Change-Id: Ia1ecad58ebf9de3f3a44b17ad1de57424b431125
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Juno: add basic support for dynamic config

Add the disable_auth dynamic parameter, that allows to disable the
authentication when TBBR is enabled. This parameter is for development
only.

Change-Id:

Juno: add basic support for dynamic config

Add the disable_auth dynamic parameter, that allows to disable the
authentication when TBBR is enabled. This parameter is for development
only.

Change-Id: Ic24ad16738517f7e07c4f506dcf69a1ae8df7d2d
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...