Merge "feat(juno): support StandaloneMm" into integration

feat(juno): support StandaloneMm

Support StandaloneMm in Juno platform.
When Juno using StandaloneMm, last 2MB area of norflash0 is used by
StandaloneMm only and that area shouldn't be accessed by n

feat(juno): support StandaloneMm

Support StandaloneMm in Juno platform.
When Juno using StandaloneMm, last 2MB area of norflash0 is used by
StandaloneMm only and that area shouldn't be accessed by normal world.
For this, add last 2MB area of norflash0 in TZC setting.

Change-Id: Ice63f13c34f452f2b8cb93ee88dc666632b84248
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>

show more ...

Merge changes from topic "hm/handoff" into integration

* changes:
refactor(fvp): reduce max size of HW_CONFIG to 16KB
refactor(arm): replace hard-coded HW_CONFIG DT size

refactor(arm): replace hard-coded HW_CONFIG DT size

Ensure consistency across all Arm platforms, even those that may already
have an existing macro for this purpose.

Change-Id: I07cd4cfcacf2c991717

refactor(arm): replace hard-coded HW_CONFIG DT size

Ensure consistency across all Arm platforms, even those that may already
have an existing macro for this purpose.

Change-Id: I07cd4cfcacf2c991717f4c115cb0babd2c614d6f
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>

show more ...

Merge changes from topic "ethos-n" into integration

* changes:
docs(maintainers): update NPU driver files
docs(ethos-n): update porting-guide.rst for NPU
feat(ethos-n): add separate RO and RW

Merge changes from topic "ethos-n" into integration

* changes:
docs(maintainers): update NPU driver files
docs(ethos-n): update porting-guide.rst for NPU
feat(ethos-n): add separate RO and RW NSAIDs
feat(ethos-n)!: add protected NPU firmware setup
feat(ethos-n): add stream extends and attr support
feat(ethos-n): add reserved memory address support
feat(ethos-n): add event and aux control support
feat(ethos-n): add SMC call to get FW properties
refactor(ethos-n): split up SMC call handling
feat(ethos-n): add NPU firmware validation
feat(ethos-n): add check for NPU in SiP setup
feat(ethos-n)!: load NPU firmware at BL2
feat(juno): support ARM_IO_IN_DTB option for Juno
fix(fconf): fix FCONF_ARM_IO_UUID_NUMBER value
fix(fvp): incorrect UUID name in FVP tb_fw_config
fix(ethos-n): add workaround for erratum 2838783
feat(ethos-n): add support for NPU to cert_create
feat(ethos-n): add NPU support in fiptool
feat(ethos-n): add support to set up NSAID
build(fiptool): add object dependency generation
feat(ethos-n): add NPU sleeping SMC call
feat(ethos-n): add multiple asset allocators
feat(ethos-n): add reset type to reset SMC calls
feat(ethos-n): add protected NPU TZMP1 regions
build(ethos-n): add TZMP1 build flag

show more ...

feat(juno): support ARM_IO_IN_DTB option for Juno

Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size o

feat(juno): support ARM_IO_IN_DTB option for Juno

Add UUIDs for loadable FIP images to Juno's tb_fw_config device tree, so
that it can be built with the ARM_IO_IN_DTB option. Increase the
max-size of the tb_fw-config image accordingly, as the new entries
enlarge that image(new size is 2,116 bytes, rounded up to 2,560 =
0xA00)

Signed-off-by: Rob Hughes <robert.hughes@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I557bca7dd32c3be084bbba11d84dfa2818cb6789

show more ...

Merge changes from topic "arm_ethosn_npu_sip" into integration

* changes:
Add SiP service to configure Arm Ethos-N NPU
plat/arm/juno: Add support to use hw_config in BL31

plat/arm/juno: Add support to use hw_config in BL31

To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been

plat/arm/juno: Add support to use hw_config in BL31

To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.

Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6

show more ...

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/a

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/arm: Load and populate fw_config and tb_fw_config
fconf: Handle error from fconf_load_config
plat/arm: Update the fw_config load call and populate it's information
fconf: Allow fconf to load additional firmware configuration
fconf: Clean confused naming between TB_FW and FW_CONFIG
tbbr/dualroot: Add fw_config image in chain of trust
cert_tool: Update cert_tool for fw_config image support
fiptool: Add fw_config in FIP
plat/arm: Rentroduce tb_fw_config device tree

show more ...

plat/arm: Rentroduce tb_fw_config device tree

Moved BL2 configuration nodes from fw_config to newly
created tb_fw_config device tree.

fw_config device tree's main usage is to hold properties shared

plat/arm: Rentroduce tb_fw_config device tree

Moved BL2 configuration nodes from fw_config to newly
created tb_fw_config device tree.

fw_config device tree's main usage is to hold properties shared
across all BLx images.
An example is the "dtb-registry" node, which contains the
information about the other device tree configurations
(load-address, size).

Also, Updated load-address of tb_fw_config which is now located
after fw_config in SRAM.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ic398c86a4d822dacd55b5e25fd41d4fe3888d79a

show more ...

Merge "plat/arm: do not include export header directly" into integration

plat/arm: do not include export header directly

As per "include/export/README", TF-A code should never include export
headers directly. Instead, it should include a wrapper header that
ensures the e

plat/arm: do not include export header directly

As per "include/export/README", TF-A code should never include export
headers directly. Instead, it should include a wrapper header that
ensures the export header is included in the right manner.

"tbbr_img_def_exp.h" is directly included in TF-A code, this patch
replaces it with its wrapper header "tbbr_img_def.h".

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I31c1a42e6a7bcac4c396bb17e8548567ecd8147d

show more ...

Merge changes I85eb75cf,Ic6d9f927 into integration

* changes:
fconf: Update dyn_config compatible string
doc: Add binding document for fconf.

fconf: Update dyn_config compatible string

Dynamic configuration properties are fconf properties. Modify the
compatible string from "arm,.." to "fconf,.." to reflect this.

Signed-off-by: Louis Maye

fconf: Update dyn_config compatible string

Dynamic configuration properties are fconf properties. Modify the
compatible string from "arm,.." to "fconf,.." to reflect this.

Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Change-Id: I85eb75cf877c5f4d3feea3936d4c348ca843bc6c

show more ...

Merge changes from topic "lm/fconf" into integration

* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform

Merge changes from topic "lm/fconf" into integration

* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform io policies into fconf
fconf: Add mbedtls shared heap as property
fconf: Add TBBR disable_authentication property
fconf: Add dynamic config DTBs info as property
fconf: Populate properties from dtb during bl2 setup
fconf: Load config dtb from bl1
fconf: initial commit

show more ...

fconf: Add dynamic config DTBs info as property

This patch introduces a better separation between the trusted-boot
related properties, and the dynamic configuration DTBs loading
information.

The dy

fconf: Add dynamic config DTBs info as property

This patch introduces a better separation between the trusted-boot
related properties, and the dynamic configuration DTBs loading
information.

The dynamic configuration DTBs properties are moved to a new node:
`dtb-registry`. All the sub-nodes present will be provided to the
dynamic config framework to be loaded. The node currently only contains
the already defined configuration DTBs, but can be extended for future
features if necessary.
The dynamic config framework is modified to use the abstraction provided
by the fconf framework, instead of directly accessing the DTBs.

The trusted-boot properties are kept under the "arm,tb_fw" compatible
string, but in a separate `tb_fw-config` node.
The `tb_fw-config` property of the `dtb-registry` node simply points
to the load address of `fw_config`, as the `tb_fw-config` is currently
part of the same DTB.

Change-Id: Iceb6c4c2cb92b692b6e28dbdc9fb060f1c46de82
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...