Merge "fix(romlib): romlib build without MbedTLS" into integration

fix(romlib): romlib build without MbedTLS

The ROMLIB build currently has a strong dependency on MbedTLS. This
patch has been introduced to remove this dependency, making it more
flexible.

Change-Id

fix(romlib): romlib build without MbedTLS

The ROMLIB build currently has a strong dependency on MbedTLS. This
patch has been introduced to remove this dependency, making it more
flexible.

Change-Id: If8c4cc7cf557687f40b235a4b8f931cfb70943fd
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

Merge changes from topic "romlib-fixes" into integration

* changes:
fix(romlib): wrap indirectly included functions
fix(arm): remove duplicate jumptable entry

fix(arm): remove duplicate jumptable entry

Change-Id: I4cc4ef493318372ec0d0531ca3e98196e7065ab9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Merge changes from topic "fix-for-hash-lengths" into integration

* changes:
fix(auth): allow hashes of different lengths
feat(juno): add mbedtls_asn1_get_len symbol in ROMlib
feat(fvp): add mb

Merge changes from topic "fix-for-hash-lengths" into integration

* changes:
fix(auth): allow hashes of different lengths
feat(juno): add mbedtls_asn1_get_len symbol in ROMlib
feat(fvp): add mbedtls_asn1_get_len symbol in ROMlib

show more ...

feat(fvp): add mbedtls_asn1_get_len symbol in ROMlib

mbedtls_asn1_get_len() will be needed by the X.509 parser in an
upcoming patch.

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Cha

feat(fvp): add mbedtls_asn1_get_len symbol in ROMlib

mbedtls_asn1_get_len() will be needed by the X.509 parser in an
upcoming patch.

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I14310c80033a1142a94c0c4b54d63331479b643d

show more ...

Merge changes I1b092bc1,Ifc2461b4,I5176caa5 into integration

* changes:
docs(rme): update RMM-EL3 Boot Manifest structure description
feat(rme): read DRAM information from FVP DTB
feat(rme): s

Merge changes I1b092bc1,Ifc2461b4,I5176caa5 into integration

* changes:
docs(rme): update RMM-EL3 Boot Manifest structure description
feat(rme): read DRAM information from FVP DTB
feat(rme): set DRAM information in Boot Manifest platform data

show more ...

feat(rme): read DRAM information from FVP DTB

This patch builds on the previous patch by implementing
support for reading NS DRAM layout of FVP model from
HW_CONFIG Device tree.

Macro _RMMD_MANIFES

feat(rme): read DRAM information from FVP DTB

This patch builds on the previous patch by implementing
support for reading NS DRAM layout of FVP model from
HW_CONFIG Device tree.

Macro _RMMD_MANIFEST_VERSION is renamed to
SET_RMMD_MANIFEST_VERSION to suppress MISRA-C
"rule MC3R1.D4.5: (advisory) Identifiers in
the same name space with overlapping visibility
should be typographically unambiguous" warning

Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: Ifc2461b4441a1efdd4b7c656ab4d15e62479f77b

show more ...

Merge changes from topic "qemu-measured-boot" into integration

* changes:
fix(arm): fix fvp and juno build with USE_ROMLIB option
feat(fdt-wrappers): add function to find or add a sudnode

fix(arm): fix fvp and juno build with USE_ROMLIB option

Change-Id: I8a9b30a952be594435003f0d684e3faad484e8b8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Merge "plat/fvp: Support for extracting UART serial node info from DT" into integration

plat/fvp: Support for extracting UART serial node info from DT

This patch introduces the populate function which leverages
a new driver to extract base address and clk frequency properties
of the ua

plat/fvp: Support for extracting UART serial node info from DT

This patch introduces the populate function which leverages
a new driver to extract base address and clk frequency properties
of the uart serial node from HW_CONFIG device tree.

This patch also introduces fdt helper API fdtw_translate_address()
which helps in performing address translation.

Change-Id: I053628065ebddbde0c9cb3aa93d838619f502ee3
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge changes from topic "fdt_wrappers_rework" into integration

* changes:
plat/stm32: Use generic fdt_get_stdout_node_offset()
fdt/wrappers: Introduce code to find UART DT node
plat/stm32: Us

Merge changes from topic "fdt_wrappers_rework" into integration

* changes:
plat/stm32: Use generic fdt_get_stdout_node_offset()
fdt/wrappers: Introduce code to find UART DT node
plat/stm32: Use generic fdt_get_reg_props_by_name()

show more ...

fdt/wrappers: Introduce code to find UART DT node

The stdout-path property in the /chosen node of a DTB points to a device
node, which is used for boot console output.
On most (if not all) ARM based

fdt/wrappers: Introduce code to find UART DT node

The stdout-path property in the /chosen node of a DTB points to a device
node, which is used for boot console output.
On most (if not all) ARM based platforms this is the debug UART.
The ST platform code contains a function to parse this property and
chase down eventual aliases to learn the node offset of this UART node.

Introduce a slightly more generalised version of this ST platform function
in the generic fdt_wrappers code. This will be useful for other platforms
as well.

Change-Id: Ie6da47ace7833861b5e35fe8cba49835db3659a5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

plat/stm32: Use generic fdt_get_reg_props_by_name()

The STM32 platform port parse DT nodes to find base address to
peripherals. It does this by using its own implementation, even though
this functio

plat/stm32: Use generic fdt_get_reg_props_by_name()

The STM32 platform port parse DT nodes to find base address to
peripherals. It does this by using its own implementation, even though
this functionality is generic and actually widely useful outside of the
STM32 code.

Re-implement fdt_get_reg_props_by_name() on top of the newly introduced
fdt_get_reg_props_by_index() function, and move it to fdt_wrapper.c.
This is removes the assumption that #address-cells and #size-cells are
always one.

Change-Id: I6d584930262c732b6e0356d98aea50b2654f789d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge changes from topic "fdt_wrappers_rework" into integration

* changes:
arm: fconf: Fix GICv3 dynamic configuration
plat/stm32: Implement fdt_read_uint32_default() as a wrapper
fdt/wrappers

Merge changes from topic "fdt_wrappers_rework" into integration

* changes:
arm: fconf: Fix GICv3 dynamic configuration
plat/stm32: Implement fdt_read_uint32_default() as a wrapper
fdt/wrappers: Replace fdtw_read_cells() implementation
plat/stm32: Use generic fdt_read_uint32_array() implementation
fdt/wrappers: Generalise fdtw_read_array()

show more ...

arm: fconf: Fix GICv3 dynamic configuration

At the moment the fconf_populate_gicv3_config() implementation is
somewhat incomplete: First it actually fails to store the retrieved
information (the loc

arm: fconf: Fix GICv3 dynamic configuration

At the moment the fconf_populate_gicv3_config() implementation is
somewhat incomplete: First it actually fails to store the retrieved
information (the local addr[] array is going nowhere), but also it makes
quite some assumptions about the device tree passed to it: it needs to
use two address-cells and two size-cells, and also requires all five
register regions to be specified, where actually only the first two
are mandatory according to the binding (and needed by our code).

Fix this by introducing a proper generic function to retrieve "reg"
property information from a DT node:
We retrieve the #address-cells and #size-cells properties from the
parent node, then use those to extract the right values from the "reg"
property. The function takes an index to select one region of a reg
property.

This is loosely based on the STM32 implementation using "reg-names",
which we will subsume in a follow-up patch.

Change-Id: Ia59bfdf80aea4e36876c7b6ed4d153e303f482e8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

fdt/wrappers: Generalise fdtw_read_array()

Currently our fdtw_read_array() implementation requires the length of
the property to exactly match the requested size, which makes it less
flexible for pa

fdt/wrappers: Generalise fdtw_read_array()

Currently our fdtw_read_array() implementation requires the length of
the property to exactly match the requested size, which makes it less
flexible for parsing generic device trees.
Also the name is slightly misleading, since we treat the cells of the
array as 32 bit unsigned integers, performing the endianess conversion.

To fix those issues and align the code more with other DT users (Linux
kernel or U-Boot), rename the function to "fdt_read_uint32_array", and
relax the length check to only check if the property covers at least the
number of cells we request.
This also changes the variable names to be more in-line with other DT
users, and switches to the proper data types.

This makes this function more useful in later patches.

Change-Id: Id86f4f588ffcb5106d4476763ecdfe35a735fa6c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fc

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fconf: necessary modifications to support fconf in BL31 & SP_MIN
fconf: enhancements to firmware configuration framework

show more ...

fconf: Extract topology node properties from HW_CONFIG dtb

Create, register( and implicitly invoke) fconf_populate_topology()
function which extracts the topology related properties from dtb into
th

fconf: Extract topology node properties from HW_CONFIG dtb

Create, register( and implicitly invoke) fconf_populate_topology()
function which extracts the topology related properties from dtb into
the newly created fconf based configuration structure 'soc_topology'.
Appropriate libfdt APIs are added to jmptbl.i file for use with USE_ROMLIB
build feature.

A new property which describes the power domain levels is added to the
HW_CONFIG device tree source files.

This patch also fixes a minor bug in the common device tree file
fvp-base-gicv3-psci-dynamiq-common.dtsi
As this file includes fvp-base-gicv3-psci-common.dtsi, it is necessary
to delete all previous cluster node definitons because DynamIQ based
models have upto 8 CPUs in each cluster. If not deleted, the final dts
would have an inaccurate description of SoC topology, i.e., cluster0
with 8 or more core nodes and cluster1 with 4 core nodes.

Change-Id: I9eb406da3ba4732008a66c01afec7c9fa8ef59bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge changes from topic "lm/fconf" into integration

* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform

Merge changes from topic "lm/fconf" into integration

* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform io policies into fconf
fconf: Add mbedtls shared heap as property
fconf: Add TBBR disable_authentication property
fconf: Add dynamic config DTBs info as property
fconf: Populate properties from dtb during bl2 setup
fconf: Load config dtb from bl1
fconf: initial commit

show more ...

fconf: Add dynamic config DTBs info as property

This patch introduces a better separation between the trusted-boot
related properties, and the dynamic configuration DTBs loading
information.

The dy

fconf: Add dynamic config DTBs info as property

This patch introduces a better separation between the trusted-boot
related properties, and the dynamic configuration DTBs loading
information.

The dynamic configuration DTBs properties are moved to a new node:
`dtb-registry`. All the sub-nodes present will be provided to the
dynamic config framework to be loaded. The node currently only contains
the already defined configuration DTBs, but can be extended for future
features if necessary.
The dynamic config framework is modified to use the abstraction provided
by the fconf framework, instead of directly accessing the DTBs.

The trusted-boot properties are kept under the "arm,tb_fw" compatible
string, but in a separate `tb_fw-config` node.
The `tb_fw-config` property of the `dtb-registry` node simply points
to the load address of `fw_config`, as the `tb_fw-config` is currently
part of the same DTB.

Change-Id: Iceb6c4c2cb92b692b6e28dbdc9fb060f1c46de82
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...

Merge "FDT wrappers: add functions for read/write bytes" into integration

FDT wrappers: add functions for read/write bytes

This patch adds 'fdtw_read_bytes' and 'fdtw_write_inplace_bytes'
functions for read/write array of bytes from/to a given property.
It also adds 'fdt_

FDT wrappers: add functions for read/write bytes

This patch adds 'fdtw_read_bytes' and 'fdtw_write_inplace_bytes'
functions for read/write array of bytes from/to a given property.
It also adds 'fdt_setprop_inplace_namelen_partial' to jmptbl.i
files for builds with USE_ROMLIB=1 option.

Change-Id: Ied7b5c8b38a0e21d508aa7bcf5893e656028b14d
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge pull request #1902 from jts-arm/romlib

ROMLIB bug fixes