Merge changes from topic "hm/handoff" into integration

* changes:
refactor(fvp): reduce max size of HW_CONFIG to 16KB
refactor(arm): replace hard-coded HW_CONFIG DT size

refactor(arm): replace hard-coded HW_CONFIG DT size

Ensure consistency across all Arm platforms, even those that may already
have an existing macro for this purpose.

Change-Id: I07cd4cfcacf2c991717

refactor(arm): replace hard-coded HW_CONFIG DT size

Ensure consistency across all Arm platforms, even those that may already
have an existing macro for this purpose.

Change-Id: I07cd4cfcacf2c991717f4c115cb0babd2c614d6f
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>

show more ...

Merge "refactor(plat/arm): replace FIP base and size macro with a generic name" into integration

refactor(plat/arm): replace FIP base and size macro with a generic name

Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IM

refactor(plat/arm): replace FIP base and size macro with a generic name

Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.

Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

Merge changes from topic "tf-cleanup" into integration

* changes:
plat/arm: Move fconf population after the enablement of MMU
lib/fconf: Update 'set_fw_config_info' function
lib/fconf: Update

Merge changes from topic "tf-cleanup" into integration

* changes:
plat/arm: Move fconf population after the enablement of MMU
lib/fconf: Update 'set_fw_config_info' function
lib/fconf: Update data type of config max size
plat/arm: Check the need for firmware update only once
plat/arm: sgm: Use consistent name for tb fw config node

show more ...

plat/arm: Move fconf population after the enablement of MMU

In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after

plat/arm: Move fconf population after the enablement of MMU

In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284

show more ...

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/a

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/arm: Load and populate fw_config and tb_fw_config
fconf: Handle error from fconf_load_config
plat/arm: Update the fw_config load call and populate it's information
fconf: Allow fconf to load additional firmware configuration
fconf: Clean confused naming between TB_FW and FW_CONFIG
tbbr/dualroot: Add fw_config image in chain of trust
cert_tool: Update cert_tool for fw_config image support
fiptool: Add fw_config in FIP
plat/arm: Rentroduce tb_fw_config device tree

show more ...

fconf: Clean confused naming between TB_FW and FW_CONFIG

Cleaned up confused naming between TB_FW and FW_CONFIG.

Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V B

fconf: Clean confused naming between TB_FW and FW_CONFIG

Cleaned up confused naming between TB_FW and FW_CONFIG.

Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9e9f6e6ca076d38fee0388f97d370431ae067f08

show more ...

Merge "Create separate header for ARM specific SMCCC defines" into integration

Create separate header for ARM specific SMCCC defines

Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.

Signed-off-by: Manish V Badarkhe

Create separate header for ARM specific SMCCC defines

Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485

show more ...

Merge "Unify type of "cpu_idx" across PSCI module." into integration

Unify type of "cpu_idx" across PSCI module.

NOTE for platform integrators:
API `plat_psci_stat_get_residency()` third argument
`last_cpu_idx` is changed from "signed int" to the
"unsigned i

Unify type of "cpu_idx" across PSCI module.

NOTE for platform integrators:
API `plat_psci_stat_get_residency()` third argument
`last_cpu_idx` is changed from "signed int" to the
"unsigned int" type.

Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.

2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent

Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.

Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required

Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c

show more ...

Merge "A5DS: Change boot address to point to DDR address" into integration

Merge "A5DS: Correct system freq, Cache Writeback Granule" into integration

A5DS: Change boot address to point to DDR address

Point boot address to DDR location for booting A5DS FPGA
FIP, Kernel and rootfs are sideloaded to DDR
Also move BL2 to higher address in DDR

Change

A5DS: Change boot address to point to DDR address

Point boot address to DDR location for booting A5DS FPGA
FIP, Kernel and rootfs are sideloaded to DDR
Also move BL2 to higher address in DDR

Change-Id: Ia2a57a0bda776a1a0a96bcd3cfb5c6cd2cf4dc04
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>

show more ...

A5DS: Correct system freq, Cache Writeback Granule

Correct the system, timer and uart frequencies to successfully run
the stack on FPGA
Correct Cortex-A5MPcore to 8 word granularity for Cache writeb

A5DS: Correct system freq, Cache Writeback Granule

Correct the system, timer and uart frequencies to successfully run
the stack on FPGA
Correct Cortex-A5MPcore to 8 word granularity for Cache writeback

Change-Id: I2c59c26b7dca440791ad39f2297c68ae513da7b6
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>

show more ...

Merge "drivers: add a driver for snoop control unit" into integration

drivers: add a driver for snoop control unit

The SCU connects one to four Cortex-A5/Cortex-A9 processors
to the memory system through the AXI interfaces.

The SCU functions are to:
- maintain data c

drivers: add a driver for snoop control unit

The SCU connects one to four Cortex-A5/Cortex-A9 processors
to the memory system through the AXI interfaces.

The SCU functions are to:
- maintain data cache coherency between the Cortex-A5/Cortex-A9
processors
- initiate L2 AXI memory accesses
- arbitrate between Cortex-A5/Cortex-A9 processors requesting
L2 accesses
- manage ACP accesses.

Snoop Control Unit will enable to snoop on other CPUs caches.
This is very important when it comes to synchronizing data between
CPUs. As an example, there is a high chance that data might be
cache'd and other CPUs can't see the change. In such cases,
if snoop control unit is enabled, data is synchoronized immediately
between CPUs and the changes are visible to other CPUs.

This driver provides functionality to enable SCU as well as enabling
user to know the following
- number of CPUs present
- is a particular CPU operating in SMP mode or AMP mode
- data cache size of a particular CPU
- does SCU has ACP port
- is L2CPRESENT

Change-Id: I0d977970154fa60df57caf449200d471f02312a0
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>

show more ...

Merge changes from topic "a5ds-multicore" into integration

* changes:
a5ds: add multicore support
a5ds: Hold the secondary cpus in pen rather than panic

a5ds: add multicore support

Enable cores 1-3 using psci. On receiving the smc call from kernel,
core 0 will bring the secondary cores out pen and signal an event for
the cores. Currently on switchin

a5ds: add multicore support

Enable cores 1-3 using psci. On receiving the smc call from kernel,
core 0 will bring the secondary cores out pen and signal an event for
the cores. Currently on switching the cores is enabled i.e. it is not
possible to suspend, switch cores off, etc.

Change-Id: I6087e1d2ec650e1d587fd543efc1b08cbb50ae5f
Signed-off-by: Usama Arif <usama.arif@arm.com>

show more ...

a5ds: Hold the secondary cpus in pen rather than panic

For the secondary CPUs, hold the cpu in wfe rather then panic.
This will be needed when multicore support is added to a5ds as
the smc call will

a5ds: Hold the secondary cpus in pen rather than panic

For the secondary CPUs, hold the cpu in wfe rather then panic.
This will be needed when multicore support is added to a5ds as
the smc call will write to the hold base and signal an event to
power on the secondary CPUs.

Change-Id: I0ffc2059e9ef894c21375ca5c94def859bfa6599
Signed-off-by: Usama Arif <usama.arif@arm.com>

show more ...

Merge "plat/arm: Introduce A5 DesignStart platform." into integration

plat/arm: Introduce A5 DesignStart platform.

This patch adds support for Cortex-A5 FVP for the
DesignStart program. DesignStart aims at providing
low cost and fast access to Arm IP.

Currently with

plat/arm: Introduce A5 DesignStart platform.

This patch adds support for Cortex-A5 FVP for the
DesignStart program. DesignStart aims at providing
low cost and fast access to Arm IP.

Currently with this patch only the primary CPU is booted
and the rest of them wait for an interrupt.

Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I3a2281ce6de2402dda4610a89939ed53aa045fab

show more ...