Merge pull request #1681 from Andre-ARM/allwinner/fixes

allwinner: clock / power fixes

allwinner: A64/H5: setup missing bus clocks

The legacy Allwinner ATF port used to setup some clocks, and U-Boot is
still relying on this. We don't need to setup the full set, as the SPL
is doing mos

allwinner: A64/H5: setup missing bus clocks

The legacy Allwinner ATF port used to setup some clocks, and U-Boot is
still relying on this. We don't need to setup the full set, as the SPL
is doing most of it, but it misses one clock (AHB2) and programs another
(AHB1) to quite conservative values.

Fix this up during the platform setup to improve USB and Ethernet
performance, iperf values go up by 31% in my setup with that patch.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge pull request #1646 from Andre-ARM/allwinner/pmic-v2

Allwinner/pmic v2

allwinner: Pass FDT address to sunxi_pmic_setup()

For Allwinner boards we now use some heuritistics to find a preloaded
.dtb file.

Pass this address on to the PMIC setup routine, so that it can use

allwinner: Pass FDT address to sunxi_pmic_setup()

For Allwinner boards we now use some heuritistics to find a preloaded
.dtb file.

Pass this address on to the PMIC setup routine, so that it can use the
information contained therein to setup some initial power rails.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Find DTB in BL33 image

The initial PMIC setup for the Allwinner platform is quite board
specific, and used to be guarded by reading the .dtb stub *name* from the
SPL image in the legacy A

allwinner: Find DTB in BL33 image

The initial PMIC setup for the Allwinner platform is quite board
specific, and used to be guarded by reading the .dtb stub *name* from the
SPL image in the legacy ATF port. This doesn't scale particularly well,
and requires constant maintainance.
Instead having the actual .dtb available would be much better, as the PMIC
setup requirements could be read from there directly.
The only available BL33 for Allwinner platforms so far is U-Boot, and
fortunately U-Boot comes with the full featured .dtb, appended to the
end of the U-Boot image.

Introduce some code that scans the beginning of the BL33 image to look
for the load address, which is followed by the image size. Adding those
two values together gives us the end of the image and thus the .dtb
address. Verify that this heuristic is valid by sanitising some values
and checking the DTB magic.

Print out the DTB address and the model name, if specified in the root
node.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Export sunxi_private.h

So far we have a sunxi_private.h header file in the common code directory.
This holds the prototypes of various functions we share in *common*
code. However we will

allwinner: Export sunxi_private.h

So far we have a sunxi_private.h header file in the common code directory.
This holds the prototypes of various functions we share in *common*
code. However we will need some of those in the platform specific code
parts as well, and want to introduce new functions shared across the
whole platform port.

So move the sunxi_private.h file into the common/include directory, so
that it becomes visible to all parts of the platform code.
Fix up the existing #includes and add missing ones, also add the
sunxi_read_soc_id() prototype here.

This will be used in follow up patches.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Pass SoC ID to sunxi_pmic_setup()

In the BL31 platform setup we read the Allwinner SoC ID to identify the
chip and print its name.
In addition to that we will need to differentiate the po

allwinner: Pass SoC ID to sunxi_pmic_setup()

In the BL31 platform setup we read the Allwinner SoC ID to identify the
chip and print its name.
In addition to that we will need to differentiate the power setup
between the SoCs, to pass on the SoC ID to the PMIC setup routine.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Introduce names for SoC IDs

We will soon make more use of the Allwinner SoC ID, to differentiate the
platform setup.
Introduce definitions to avoid dealing with magic numbers and make the

allwinner: Introduce names for SoC IDs

We will soon make more use of the Allwinner SoC ID, to differentiate the
platform setup.
Introduce definitions to avoid dealing with magic numbers and make the
code more readable.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge pull request #1534 from Icenowy/sun50i_h6_pmic

Add support for Allwinner H6 + X-Powers AXP805 PMIC combination

allwinner: call PMIC setup code

As the ATF may need to do some power initialization on Allwinner
platform with AXP PMICs, call the PMIC setup code in BL31.

Stub of PMIC setup code is added, to prev

allwinner: call PMIC setup code

As the ATF may need to do some power initialization on Allwinner
platform with AXP PMICs, call the PMIC setup code in BL31.

Stub of PMIC setup code is added, to prevent undefined reference.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

show more ...

Merge pull request #1465 from Andre-ARM/allwinner/h6-support

allwinner: Add H6 SoC support

allwinner: Add Allwinner H6 SoC support

The H6 is Allwinner's most recent SoC. It shares most peripherals with the
other ARMv8 Allwinner SoCs (A64/H5), but has a completely different memory
map.

In

allwinner: Add Allwinner H6 SoC support

The H6 is Allwinner's most recent SoC. It shares most peripherals with the
other ARMv8 Allwinner SoCs (A64/H5), but has a completely different memory
map.

Introduce a separate platform target, which includes a different header
file to cater for the address differences. Also add the new build target
to the documentation.

The new ATF platform name is "sun50i_h6".

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

Merge pull request #1458 from Andre-ARM/allwinner/fixes

allwinner: various smaller fixes

Merge pull request #1447 from Amit-Radur/bl32_v1

allwinner: Add BL32 (corresponds to Trusted OS) support

allwinner: Detect and output current SoC

So far we already support booting on two different SoCs, and we will
shortly add a third, so add some code to determine the current SoC type.
This can be lat

allwinner: Detect and output current SoC

So far we already support booting on two different SoCs, and we will
shortly add a third, so add some code to determine the current SoC type.
This can be later used to runtime detect certain properties.

Also print the SoC name to the console, to give valuable debug information.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Add BL32 (corresponds to Trusted OS) support

This patch is an attempt to run Trusted OS (OP-TEE OS being one of them) along
side BL31 image.

ATF supports multiple SPD's that can take dis

allwinner: Add BL32 (corresponds to Trusted OS) support

This patch is an attempt to run Trusted OS (OP-TEE OS being one of them) along
side BL31 image.

ATF supports multiple SPD's that can take dispatcher name (opteed for OP-TEE OS)
as an input using the 'SPD=<dispatcher name>' option during bl31 build.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

show more ...

allwinner: Add BL32 (corresponds to Trusted OS) support

This patch is an attempt to run Trusted OS (OP-TEE OS being one of them) along
side BL31 image.

ATF supports multiple SPD's that can take dis

allwinner: Add BL32 (corresponds to Trusted OS) support

This patch is an attempt to run Trusted OS (OP-TEE OS being one of them) along
side BL31 image.

ATF supports multiple SPD's that can take dispatcher name (opteed for OP-TEE OS)
as an input using the 'SPD=<dispatcher name>' option during bl31 build.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

show more ...

Merge pull request #1400 from Andre-ARM/allwinner/v1

Allwinner platform support

allwinner: Add security setup

Some peripherals are TrustZone aware, so they need to be configured to
be accessible from non-secure world, as we don't need any of them being
exclusive to the secure w

allwinner: Add security setup

Some peripherals are TrustZone aware, so they need to be configured to
be accessible from non-secure world, as we don't need any of them being
exclusive to the secure world.
This affects some clocks, DMA channels and the Secure Peripheral
Controller (SPC). The latter controls access to most devices, but is not
active unless booting with the secure boot fuse burnt.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Add functions to control CPU power/reset

sun50i_cpu_on will be used by the PSCI implementation to initialize
secondary cores for SMP. Unfortunately, sun50i_cpu_off is not usable by
PSCI d

allwinner: Add functions to control CPU power/reset

sun50i_cpu_on will be used by the PSCI implementation to initialize
secondary cores for SMP. Unfortunately, sun50i_cpu_off is not usable by
PSCI directly, because it is not possible for a CPU to use this function
to power itself down. Power cannot be shut off until the outputs are
clamped, and MMIO does not work once the outputs are clamped.

But at least CPU0 can shutdown the other cores early in the BL31 boot
process and before shutting down the system.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...

allwinner: Introduce basic platform support

This platform supports Allwinner's SoCs with ARMv8 cores. So far they
all sport a single cluster of Cortex-A53 cores.

"sunxi" is the original code name u

allwinner: Introduce basic platform support

This platform supports Allwinner's SoCs with ARMv8 cores. So far they
all sport a single cluster of Cortex-A53 cores.

"sunxi" is the original code name used for this platform, and since it
appears in the Linux kernel and in U-Boot as well, we use it here as a
short file name prefix and for identifiers.

This port includes BL31 support only. U-Boot's SPL takes the role of the
primary loader, also doing the DRAM initialization. It then loads the
rest of the firmware, namely ATF and U-Boot (BL33), then hands execution
over to ATF.

This commit includes the basic platform code shared across all SoCs.
There is no platform.mk yet.

[Andre: moved files into proper directories, supported RESET_TO_BL31,
various clean ups and simplifications ]

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

show more ...