Merge changes I86959e67,I0b0d1d36,I5b5267f4,I056c8710,I3474aa97 into integration

* changes:
chore: fix preprocessor checks
refactor: convert arm platforms to use the generic GIC driver
refacto

Merge changes I86959e67,I0b0d1d36,I5b5267f4,I056c8710,I3474aa97 into integration

* changes:
chore: fix preprocessor checks
refactor: convert arm platforms to use the generic GIC driver
refactor(gic): promote most of the GIC driver to common code
refactor: make arm_gicv2.c and arm_gicv3.c common
refactor(fvp): use more arm generic code for gicv3

show more ...

refactor(gic): promote most of the GIC driver to common code

More often than not, Arm based systems include some revision of a GIC.
There are two ways of adding support for them in platform code - c

refactor(gic): promote most of the GIC driver to common code

More often than not, Arm based systems include some revision of a GIC.
There are two ways of adding support for them in platform code - calling
the top-level helpers from plat/arm/common/arm_gicvX.c or by using the
driver directly. Both of these methods allow for a high degree of
customisation - most functions are defined to be weak and there are no
calls to any of them in generic code.

As it turns out, requirements around those GICs are largely the same.
Platforms that use arm_gicvX.c use the helpers identically among each
other. Platforms that use the driver directly tend to end up with calls
that look a lot like the arm_gicvX.c helpers and the weakness of the
functions are never exercised.

All of this results in a lot of code duplication to do what is
essentially the same thing. Even though it's not a lot of code, when
multiplied among many platforms it becomes significant and makes
refactoring it quite difficult. It's also bug prone since the steps are
a little convoluted and things are likely to work even with subtle
errors (see 50009f61177421118f42d6a000611ba0e613d54b).

So promote as much of the GIC to be called from common code. Do the
setup in bl31_main() and have every PSCI method do the state management
directly instead of delegating it to the platform hooks. We can base
this implementation on arm_gicvX.c since they already offer logical
names and have worked quite well so far with minimal changes.

The main benefit of doing this is reduced code duplication. If we assume
that, outside of some platform setup, GIC management is identical, then
a platform can add support by telling the build system, regardless of
GIC revision. The other benefit is performance - BL31 and PSCI already
know the core_pos and they can pass it as an argument instead of having
to call plat_my_core_pos(). Now, the only platform specific GIC actions
necessary are the saving and restoring of context on entering and
exiting a power domain. The PSCI library does not keep track of this so
it is unable perform it itself. The routines themselves are also
provided.

For compatibility all of this is hidden behind a build flag. Platforms
are encouraged to adopt this driver, but it would not be practical to
convert and validate every GIC based platform.

This patch renames the functions in question to follow the
gic_<function>() convention. This allows the names to be version
agnostic.

Finally, drop the weak definitions - they are unused, likely to remain
so, and can be added back if the need arises.

Change-Id: I5b5267f4b72f633fb1096400ec8e4b208694135f
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge changes from topic "xlnx_fix_gen_missing_brace" into integration

* changes:
fix(platforms): modify function to have single return
fix(el3-runtime): add missing curly braces
fix(locks): a

Merge changes from topic "xlnx_fix_gen_missing_brace" into integration

* changes:
fix(platforms): modify function to have single return
fix(el3-runtime): add missing curly braces
fix(locks): add missing curly braces
fix(psci): add missing curly braces
fix(bl31): add missing curly braces
fix(console): add missing curly braces
fix(arm-drivers): add missing curly braces
fix(common): add missing curly braces
fix(platforms): add missing curly braces

show more ...

fix(psci): add missing curly braces

This corrects the MISRA violation C2012-15.6:
The body of an iteration-statement or a selection-statement shall
be a compound-statement.
Enclosed statement body w

fix(psci): add missing curly braces

This corrects the MISRA violation C2012-15.6:
The body of an iteration-statement or a selection-statement shall
be a compound-statement.
Enclosed statement body within the curly braces.

Change-Id: I8b656f59b445e914dd3f47e3dde83735481a3640
Signed-off-by: Nithin G <nithing@amd.com>
Signed-off-by: Maheedhar Bollapalli <maheedharsai.bollapalli@amd.com>

show more ...

Merge changes I765a7fa0,Ic33f0b6d,I8d1a88c7,I381f96be,I698fa849, ... into integration

* changes:
fix(cpus): clear CPUPWRCTLR_EL1.CORE_PWRDN_EN_BIT on reset
chore(docs): drop the "wfi" from `pwr_

Merge changes I765a7fa0,Ic33f0b6d,I8d1a88c7,I381f96be,I698fa849, ... into integration

* changes:
fix(cpus): clear CPUPWRCTLR_EL1.CORE_PWRDN_EN_BIT on reset
chore(docs): drop the "wfi" from `pwr_domain_pwr_down_wfi`
chore(psci): drop skip_wfi variable
feat(arm): convert arm platforms to expect a wakeup
fix(cpus): avoid SME related loss of context on powerdown
feat(psci): allow cores to wake up from powerdown
refactor: panic after calling psci_power_down_wfi()
refactor(cpus): undo errata mitigations
feat(cpus): add sysreg_bit_toggle

show more ...

feat(psci): allow cores to wake up from powerdown

The simplistic view of a core's powerdown sequence is that power is
atomically cut upon calling `wfi`. However, it turns out that it has
lots to do

feat(psci): allow cores to wake up from powerdown

The simplistic view of a core's powerdown sequence is that power is
atomically cut upon calling `wfi`. However, it turns out that it has
lots to do - it has to talk to the interconnect to exit coherency, clean
caches, check for RAS errors, etc. These take significant amounts of
time and are certainly not atomic. As such there is a significant window
of opportunity for external events to happen. Many of these steps are
not destructive to context, so theoretically, the core can just "give
up" half way (or roll certain actions back) and carry on running. The
point in this sequence after which roll back is not possible is called
the point of no return.

One of these actions is the checking for RAS errors. It is possible for
one to happen during this lengthy sequence, or at least remain
undiscovered until that point. If the core were to continue powerdown
when that happens, there would be no (easy) way to inform anyone about
it. Rejecting the powerdown and letting software handle the error is the
best way to implement this.

Arm cores since at least the a510 have included this exact feature. So
far it hasn't been deemed necessary to account for it in firmware due to
the low likelihood of this happening. However, events like GIC wakeup
requests are much more probable. Older cores will powerdown and
immediately power back up when this happens. Travis and Gelas include a
feature similar to the RAS case above, called powerdown abandon. The
idea is that this will improve the latency to service the interrupt by
saving on work which the core and software need to do.

So far firmware has relied on the `wfi` being the point of no return and
if it doesn't explicitly detect a pending interrupt quite early on, it
will embark onto a sequence that it expects to end with shutdown. To
accommodate for it not being a point of no return, we must undo all of
the system management we did, just like in the warm boot entrypoint.

To achieve that, the pwr_domain_pwr_down_wfi hook must not be terminal.
Most recent platforms do some platform management and finish on the
standard `wfi`, followed by a panic or an endless loop as this is
expected to not return. To make this generic, any platform that wishes
to support wakeups must instead let common code call
`psci_power_down_wfi()` right after. Besides wakeups, this lets common
code handle powerdown errata better as well.

Then, the CPU_OFF case is simple - PSCI does not allow it to return. So
the best that can be done is to attempt the `wfi` a few times (the
choice of 32 is arbitrary) in the hope that the wakeup is transient. If
it isn't, the only choice is to panic, as the system is likely to be in
a bad state, eg. interrupts weren't routed away. The same applies for
SYSTEM_OFF, SYSTEM_RESET, and SYSTEM_RESET2. There the panic won't
matter as the system is going offline one way or another. The RAS case
will be considered in a separate patch.

Now, the CPU_SUSPEND case is more involved. First, to powerdown it must
wipe its context as it is not written on warm boot. But it cannot be
overwritten in case of a wakeup. To avoid the catch 22, save a copy that
will only be used if powerdown fails. That is about 500 bytes on the
stack so it hopefully doesn't tip anyone over any limits. In future that
can be avoided by having a core manage its own context.

Second, when the core wakes up, it must undo anything it did to prepare
for poweroff, which for the cores we care about, is writing
CPUPWRCTLR_EL1.CORE_PWRDN_EN. The least intrusive for the cpu library
way of doing this is to simply call the power off hook again and have
the hook toggle the bit. If in the future there need to be more complex
sequences, their direction can be advised on the value of this bit.

Third, do the actual "resume". Most of the logic is already there for
the retention suspend, so that only needs a small touch up to apply to
the powerdown case as well. The missing bit is the powerdown specific
state management. Luckily, the warmboot entrypoint does exactly that
already too, so steal that and we're done.

All of this is hidden behind a FEAT_PABANDON flag since it has a large
memory and runtime cost that we don't want to burden non pabandon cores
with.

Finally, do some function renaming to better reflect their purpose and
make names a little bit more consistent.

Change-Id: I2405b59300c2e24ce02e266f91b7c51474c1145f
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge "Don't return error information from console_flush" into integration

Don't return error information from console_flush

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return typ

Don't return error information from console_flush

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1486 from antonio-nino-diaz-arm/an/psci-misra

Fix several MISRA defects in PSCI library

PSCI: Fix MISRA defects in ON/OFF/SUSPEND/SYSTEM_OFF

Fix violations of MISRA C-2012 Rules 8.13, 10.1, 10.3, 17.7 and 20.7.

Change-Id: I6f45a1069b742aebf9e1d6a403717b1522083f51
Signed-off-by: Antoni

PSCI: Fix MISRA defects in ON/OFF/SUSPEND/SYSTEM_OFF

Fix violations of MISRA C-2012 Rules 8.13, 10.1, 10.3, 17.7 and 20.7.

Change-Id: I6f45a1069b742aebf9e1d6a403717b1522083f51
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1123 from robertovargas-arm/reset2

Integration of reset2 PSCI v1.1 functionality

reset2: Add PSCI system_reset2 function

This patch implements PSCI_SYSTEM_RESET2 API as defined in PSCI
v1.1 specification. The specification allows architectural and
vendor-specific resets via this

reset2: Add PSCI system_reset2 function

This patch implements PSCI_SYSTEM_RESET2 API as defined in PSCI
v1.1 specification. The specification allows architectural and
vendor-specific resets via this API. In the current specification,
there is only one architectural reset, the warm reset. This reset is
intended to provide a fast reboot path that guarantees not to reset
system main memory.

Change-Id: I057bb81a60cd0fe56465dbb5791d8e1cca025bd3
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...

Merge pull request #1029 from islmit01/im/fix_includes

Fix order of includes

Fix order of #includes

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported

Fix order of #includes

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported headers, and where there are headers within
the #if and #ifndef statements.

Change-Id: I65085a142ba6a83792b26efb47df1329153f1624
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

show more ...

Merge pull request #978 from etienne-lms/minor-build

Minor build fixes

PSCI: use same function prototype as in header file

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Merge pull request #925 from dp-arm/dp/spdx

Use SPDX license identifiers

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

show more ...

Merge branch 'integration' into tf_issue_461

Merge pull request #885 from antonio-nino-diaz-arm/an/console-flush

Implement console_flush()

Flush console where necessary

Call console_flush() before execution either terminates or leaves an
exception level.

Fixes: ARM-software/tf-issues#123

Change-Id: I64eeb92effb039f76937ce89f877b68e35

Flush console where necessary

Call console_flush() before execution either terminates or leaves an
exception level.

Fixes: ARM-software/tf-issues#123

Change-Id: I64eeb92effb039f76937ce89f877b68e355588e3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #667 from soby-mathew/sm/PSCI_lib

Introduce PSCI library

Introduce `el3_runtime` and `PSCI` libraries

This patch moves the PSCI services and BL31 frameworks like context
management and per-cpu data into new library components `PSCI` and
`el3_runtime` resp

Introduce `el3_runtime` and `PSCI` libraries

This patch moves the PSCI services and BL31 frameworks like context
management and per-cpu data into new library components `PSCI` and
`el3_runtime` respectively. This enables PSCI to be built independently from
BL31. A new `psci_lib.mk` makefile is introduced which adds the relevant
PSCI library sources and gets included by `bl31.mk`. Other changes which
are done as part of this patch are:

* The runtime services framework is now moved to the `common/` folder to
enable reuse.
* The `asm_macros.S` and `assert_macros.S` helpers are moved to architecture
specific folder.
* The `plat_psci_common.c` is moved from the `plat/common/aarch64/` folder
to `plat/common` folder. The original file location now has a stub which
just includes the file from new location to maintain platform compatibility.

Most of the changes wouldn't affect platform builds as they just involve
changes to the generic bl1.mk and bl31.mk makefiles.

NOTE: THE `plat_psci_common.c` FILE HAS MOVED LOCATION AND THE STUB FILE AT
THE ORIGINAL LOCATION IS NOW DEPRECATED. PLATFORMS SHOULD MODIFY THEIR
MAKEFILES TO INCLUDE THE FILE FROM THE NEW LOCATION.

Change-Id: I6bd87d5b59424995c6a65ef8076d4fda91ad5e86

show more ...