Merge changes I6e4cd8b5,Id5086b3c,I070d62bb into integration

* changes:
fix(el3-runtime): allow RNDR access at EL3 even when RNG_TRAP is enabled
fix(smccc): don't panic on a feature availability

Merge changes I6e4cd8b5,Id5086b3c,I070d62bb into integration

* changes:
fix(el3-runtime): allow RNDR access at EL3 even when RNG_TRAP is enabled
fix(smccc): don't panic on a feature availability call with FEAT_RNG_TRAP
fix(bl1): use per-world context correctly

show more ...

fix(bl1): use per-world context correctly

Currently, the configuration with BL1 and BL2 at SEL1 will transition
via el3_exit which will restore per-world context. However, that context
is never writ

fix(bl1): use per-world context correctly

Currently, the configuration with BL1 and BL2 at SEL1 will transition
via el3_exit which will restore per-world context. However, that context
is never written to and so zeroes end up in registers, which is not
necessarily correct.

This patch gets BL1 to call cm_manage_extensions_per_world() whenever
BL2 runs in a lower EL. This allows the per-world registers to have the
reset values we intend. An accompanying call to
cm_manage_extensions_el3() is also added for completeness.

Doing this shows a small deficiency in cptr_el3 - bits TFP and TCPAC
change a lot. This patch makes them consistent by always setting TCPAC
and TFP to 0 which unconditionally enable access to CPTR_EL2 and FPCR by
default as they are always accessible. Other places that manipulate the
TFP bit are removed.

A nice side effect of all of this is that we're now in a position to
enable and use any architectural extension in BL2.

Change-Id: I070d62bbf8e9d9b472caf7e2c931c303523be308
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge changes I3d950e72,Id315a8fe,Ib62e6e9b,I1d0475b2 into integration

* changes:
perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context
perf(psci): get PMF timestamps wi

Merge changes I3d950e72,Id315a8fe,Ib62e6e9b,I1d0475b2 into integration

* changes:
perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context
perf(psci): get PMF timestamps with no cache flushes if possible
perf(amu): greatly simplify AMU context management
perf(mpmm): greatly simplify MPMM enablement

show more ...

perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context

SVE and SME aren't enabled symmetrically for all worlds, but EL3 needs
to context switch them nonetheless. Previously,

perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context

SVE and SME aren't enabled symmetrically for all worlds, but EL3 needs
to context switch them nonetheless. Previously, this had to happen by
writing the enable bits just before reading/writing the relevant
context. But since the introduction of root context, this need not be
the case. We can have these enables always be present for EL3 and save
on some work (and ISBs!) on every context switch.

We can also hoist ZCR_EL3 to a never changing register, as we set its
value to be identical for every world, which happens to be the one we
want for EL3 too.

Change-Id: I3d950e72049a298008205ba32f230d5a5c02f8b0
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge changes from topic "sm/feat_detect" into integration

* changes:
refactor(cpufeat): restore functions in detect_arch_features
refactor(cpufeat): add macro to simplify is_feat_xx_present
c

Merge changes from topic "sm/feat_detect" into integration

* changes:
refactor(cpufeat): restore functions in detect_arch_features
refactor(cpufeat): add macro to simplify is_feat_xx_present
chore: simplify the macro names in ENABLE_FEAT mechanism

show more ...

refactor(cpufeat): add macro to simplify is_feat_xx_present

In this patch, we are trying to introduce the wrapper macro
CREATE_FEATURE_PRESENT to get the following capability and
align it for all th

refactor(cpufeat): add macro to simplify is_feat_xx_present

In this patch, we are trying to introduce the wrapper macro
CREATE_FEATURE_PRESENT to get the following capability and
align it for all the features:

-> is_feat_xx_present(): Does Hardware implement the feature.
-> uniformity in naming the function across multiple features.
-> improved readability

The is_feat_xx_present() is implemented to check if the hardware
implements the feature and does not take into account the
ENABLE_FEAT_XXX flag enabled/disabled in software.

- CREATE_FEATURE_PRESENT(name, idreg, shift, mask, idval)
The wrapper macro reduces the function to a single line and
creates the is_feat_xx_present function that checks the
id register based on the shift and mask values and compares
this against a determined idvalue.

Change-Id: I7b91d2c9c6fbe55f94c693aa1b2c50be54fb9ecc
Signed-off-by: Sona Mathew <sonarebecca.mathew@arm.com>

show more ...

Merge "refactor(cm): move EL3 registers to global context" into integration

refactor(cm): move EL3 registers to global context

Currently, EL3 context registers are duplicated per-world per-cpu.
Some registers have the same value across all CPUs, so this patch
moves these re

refactor(cm): move EL3 registers to global context

Currently, EL3 context registers are duplicated per-world per-cpu.
Some registers have the same value across all CPUs, so this patch
moves these registers out into a per-world context to reduce
memory usage.

Change-Id: I91294e3d5f4af21a58c23599af2bdbd2a747c54a
Signed-off-by: Elizabeth Ho <elizabeth.ho@arm.com>
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge changes from topic "bk/context_refactor" into integration

* changes:
refactor(amu): separate the EL2 and EL3 enablement code
refactor(cpufeat): separate the EL2 and EL3 enablement code

refactor(cpufeat): separate the EL2 and EL3 enablement code

Combining the EL2 and EL3 enablement code necessitates that it must be
called at el3_exit, which is the only place with enough context to

refactor(cpufeat): separate the EL2 and EL3 enablement code

Combining the EL2 and EL3 enablement code necessitates that it must be
called at el3_exit, which is the only place with enough context to make
the decision of what needs to be set.
Decouple them to allow them to be called from elsewhere.

Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I147764c42771e7d4100699ec8fae98dac0a505c0

show more ...

Merge changes from topic "bk/context_refactor" into integration

* changes:
fix(gicv3): restore scr_el3 after changing it
refactor(cm): make SVE and SME build dependencies logical

refactor(cm): make SVE and SME build dependencies logical

Currently, enabling SME forces SVE off. However, the SME enablement
requires SVE to be enabled, which is reflected in code. This is the
oppo

refactor(cm): make SVE and SME build dependencies logical

Currently, enabling SME forces SVE off. However, the SME enablement
requires SVE to be enabled, which is reflected in code. This is the
opposite of what the build flags require.

Further, the few platforms that enable SME also explicitly enable SVE.
Their platform.mk runs after the defaults.mk file so this override never
materializes. As a result, the override is only present on the
commandline.

Change it to something sensible where if SME is on then code can rely on
SVE being on too. Do this with a check in the Makefile as it is the more
widely used pattern. This maintains all valid use cases but subtly
changes corner cases no one uses at the moment to require a slightly
different combination of flags.

Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: If7ca3972ebc3c321e554533d7bc81af49c2472be

show more ...

Merge "feat(sme): enable SME2 functionality for NS world" into integration

feat(sme): enable SME2 functionality for NS world

FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations ef

feat(sme): enable SME2 functionality for NS world

FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations efficiently, but also provides
outer-product instructions to accelerate matrix operations.
It affords instructions for multi-vector operations.
Further, it adds an 512 bit architectural register ZT0.

This patch implements all the changes introduced with FEAT_SME2
to ensure that the instructions are allowed to access ZT0
register from Non-secure lower exception levels.

Additionally, it adds support to ensure FEAT_SME2 is aligned
with the existing FEATURE DETECTION mechanism, and documented.

Change-Id: Iee0f61943304a9cfc3db8f986047b1321d0a6463
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge changes from topic "jc/cpu_feat" into integration

* changes:
feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED
feat(cpufeat): enable FEAT_SME for FEAT_STATE_CHECKED

feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function

feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SVE specific setup.

Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.

Change-Id: I1caaba2216e8e2a651452254944a003607503216
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

feat(cpufeat): enable FEAT_SME for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second fun

feat(cpufeat): enable FEAT_SME for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SME specific setup.

Change the FVP platform default to the now supported dynamic option
(=2),so the right decision can be made by the code at runtime.

Change-Id: Ida9ccf737db5be20865b84f42b1f9587be0626ab
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge "fix(sme): add missing ISBs" into integration

fix(sme): add missing ISBs

EL3 is configured to trap accesses to SME registers (via
CPTR_EL3.ESM=0). To allow SME instructions, this needs to be temporarily
disabled before changing system registers

fix(sme): add missing ISBs

EL3 is configured to trap accesses to SME registers (via
CPTR_EL3.ESM=0). To allow SME instructions, this needs to be temporarily
disabled before changing system registers. If the PE delays the effects
of writes to system registers then accessing the SME registers will trap
without an isb. This patch adds the isb to restore functionality.

Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I8ee5ecaec978dde2525631daa682a182ad8f7f04

show more ...

Merge "feat(sme): fall back to SVE if SME is not there" into integration

feat(sme): fall back to SVE if SME is not there

Due to their interrelationship in the architecture the SVE and SME
features in TF-A are mutually exclusive. This means that a single binary
can't be s

feat(sme): fall back to SVE if SME is not there

Due to their interrelationship in the architecture the SVE and SME
features in TF-A are mutually exclusive. This means that a single binary
can't be shared between systems with and without SME if the system
without SME does support SVE, SVE will not be initialised so lower ELs
will run into trouble trying to use it. This unusual behaviour for TF-A
which normally gracefully handles situations where features are enabled
but not supported on the current hardware.

Address this by calling the SVE enable and disable functions if SME is
not supported rather than immediately exiting, these perform their own
feature checks so if neither SVE nor SME is supported behaviour is
unchanged.

Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I2c606202fa6c040069f44e29d36b5abb48391874

show more ...

Merge "feat(sme): enable SME functionality" into integration

feat(sme): enable SME functionality

This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively.

feat(sme): enable SME functionality

This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.

The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73

show more ...