Merge changes from topic "gr/smccc-updates" into integration

* changes:
refactor(smccc): refactor vendor-el3 build
refactor(docs): added versioning to smccc services
feat((smccc): add version

Merge changes from topic "gr/smccc-updates" into integration

* changes:
refactor(smccc): refactor vendor-el3 build
refactor(docs): added versioning to smccc services
feat((smccc): add version FID for PMF
refactor(smccc): move pmf to vendor el3 calls
refactor(smccc): move debugfs to vendor el3 calls
feat(smccc): add vendor-specific el3 service
feat(smccc): add vendor specific el3 id

show more ...

refactor(smccc): move pmf to vendor el3 calls

Move pmf support to vendor-specific EL3 Monitor Service Calls. Remove
pmf call count as it's not supported in vendor-specific el3 as per
SMCCC Documenta

refactor(smccc): move pmf to vendor el3 calls

Move pmf support to vendor-specific EL3 Monitor Service Calls. Remove
pmf call count as it's not supported in vendor-specific el3 as per
SMCCC Documentation 1.5:
https://developer.arm.com/documentation/den0028/latest

Add a deprecation notice to inform PMF is moved from arm-sip range to
vendor-specific EL3 range. PMF support from arm-sip range will be
removed and will not available after TF-A 2.12 release.

Change-Id: Ie1e14aa601d4fc3db352cd5621d842017a18e9ec
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>

show more ...

refactor(smccc): move debugfs to vendor el3 calls

Move debugfs to Vendor-Specific EL3 Monitor Service Calls.
Function Identifier for Vendor-Specific EL3 Monitor Service is '7' and
allocated subrange

refactor(smccc): move debugfs to vendor el3 calls

Move debugfs to Vendor-Specific EL3 Monitor Service Calls.
Function Identifier for Vendor-Specific EL3 Monitor Service is '7' and
allocated subranges of Function identifiers to different services are:

0x87000000-0x8700FFFF-SMC32: Vendor-Specific EL3 Monitor Service Calls
0xC7000000-0xC700FFFF-SMC64: Vendor-Specific EL3 Monitor Service Calls

Amend Debugfs FID's to use this range and id.

Add a deprecation notice to inform debugfs moved from arm-sip range to
Vendor-Specific EL3 range. Debugfs support from arm-sip range will be
removed and will not be available after TF-A 2.12 release.

Reference to debugfs component level documentation:
https://trustedfirmware-a.readthedocs.io/en/latest/components/debugfs-design.html#overview

Change-Id: I97a50170178f361f70c95ed0049bc4e278de59d7
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>

show more ...

Merge changes from topic "ja/spm_rme" into integration

* changes:
docs: change FVP argument in RME configuration
feat(fvp): added calls to unprotect/protect memory

feat(fvp): added calls to unprotect/protect memory

Added SiP calls to FVP platform to protect/unprotect a
memory range.
These leverage rme features to change the PAS of a given
memory range from non

feat(fvp): added calls to unprotect/protect memory

Added SiP calls to FVP platform to protect/unprotect a
memory range.
These leverage rme features to change the PAS of a given
memory range from non-secure to secure.

The mentioned call is leveraged by the SPMC in the memory
sharing flow, when memory is shared from the normal world
onto the secure world.

More details in the SPM related patches.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: Iaf15d8603a549d247ffb1fc14c16bfb94d0e178a

show more ...

Merge changes from topic "mp/test_espi" into integration

* changes:
feat(fvp): new SiP call to set an interrupt pending
refactor(arm): allow platform specific SiP support

feat(fvp): new SiP call to set an interrupt pending

This patch introduces an SiP SMC call for FVP platform to set an
interrupt pending. This is needed for testing purposes.

Change-Id: I3dc68ffbec36

feat(fvp): new SiP call to set an interrupt pending

This patch introduces an SiP SMC call for FVP platform to set an
interrupt pending. This is needed for testing purposes.

Change-Id: I3dc68ffbec36d90207c30571dc1fa7ebfb75046e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

refactor(arm): allow platform specific SiP support

This patch introduces handler to add support for SiP calls to be
handled at EL3 for Arm platforms.

Consequently, the support for SPMD LSP is moved

refactor(arm): allow platform specific SiP support

This patch introduces handler to add support for SiP calls to be
handled at EL3 for Arm platforms.

Consequently, the support for SPMD LSP is moved to corresponding
Arm platform SiP source file. This will allow us to add support
for a new SiP call in subsequent patch.

Change-Id: Ie29cb57fc622f96be3b67bebf34ce37cc82947d8
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge "feat(ethos-n)!: add support for SMMU streams" into integration

feat(ethos-n)!: add support for SMMU streams

The Arm(R) Ethos(TM)-N NPU driver now supports configuring the SMMU
streams that the NPU shall use and will therefore no longer delegate
access to these

feat(ethos-n)!: add support for SMMU streams

The Arm(R) Ethos(TM)-N NPU driver now supports configuring the SMMU
streams that the NPU shall use and will therefore no longer delegate
access to these registers to the non-secure world. In order for the
driver to support this, the device tree parsing has been updated to
support parsing the allocators used by the NPU and what SMMU stream that
is associated with each allocator.

To keep track of what NPU device each allocator is associated with, the
resulting config from the device tree parsing will now group the NPU
cores and allocators into their respective NPU device.

The SMC API has been changed to allow the caller to specify what
allocator the NPU shall be configured to use and the API version has
been bumped to indicate this change.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I6ac43819133138614e3f55a014e93466fe3d5277

show more ...

Merge changes from topic "arm_ethosn_npu_sip" into integration

* changes:
Add SiP service to configure Arm Ethos-N NPU
plat/arm/juno: Add support to use hw_config in BL31

Add SiP service to configure Arm Ethos-N NPU

By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still

Add SiP service to configure Arm Ethos-N NPU

By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.

Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2

show more ...

Merge "debugfs: add SMC channel" into integration

debugfs: add SMC channel

Provide an SMC interface to the 9p filesystem. This permits
accessing firmware drivers through a common interface, using
standardized read/write/control operations.

Signed-

debugfs: add SMC channel

Provide an SMC interface to the 9p filesystem. This permits
accessing firmware drivers through a common interface, using
standardized read/write/control operations.

Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9314662314bb060f6bc02714476574da158b2a7d

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1651 from antonio-nino-diaz-arm/an/rand-misra

Fix some MISRA defects

plat/arm: Fix MISRA defects in SiP SVC handler

No functional changes.

Change-Id: I9b9f8d3dfde08d57706ad5450de6ff858a55ac01
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #927 from jeenu-arm/state-switch

Execution state switch

Merge pull request #925 from dp-arm/dp/spdx

Use SPDX license identifiers

Introduce ARM SiP service to switch execution state

In AArch64, privileged exception levels control the execution state
(a.k.a. register width) of the immediate lower Exception Level; i.e.
whether t

Introduce ARM SiP service to switch execution state

In AArch64, privileged exception levels control the execution state
(a.k.a. register width) of the immediate lower Exception Level; i.e.
whether the lower exception level executes in AArch64 or AArch32 state.
For an exception level to have its execution state changed at run time,
it must request the change by raising a synchronous exception to the
higher exception level.

This patch implements and adds such a provision to the ARM SiP service,
by which an immediate lower exception level can request to switch its
execution state. The execution state is switched if the request is:

- raised from non-secure world;

- raised on the primary CPU, before any secondaries are brought online
with CPU_ON PSCI call;

- raised from an exception level immediately below EL3: EL2, if
implemented; otherwise NS EL1.

If successful, the SMC doesn't return to the caller, but to the entry
point supplied with the call. Otherwise, the caller will observe the SMC
returning with STATE_SW_E_DENIED code. If ARM Trusted Firmware is built
for AArch32, the feature is not supported, and the call will always
fail.

For the ARM SiP service:

- Add SMC function IDs for both AArch32 and AArch64;
- Increment the SiP service minor version to 2;
- Adjust the number of supported SiP service calls.

Add documentation for ARM SiP service.

Fixes ARM-software/tf-issues#436

Change-Id: I4347f2d6232e69fbfbe333b340fcd0caed0a4cea
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

show more ...

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

show more ...

Merge pull request #729 from dp-arm/dp/arm-sip

Add instrumentation support for PSCI

Introduce ARM SiP service

This patch adds ARM SiP service for use by ARM standard platforms.
This service is added to support the SMC interface for the Performance
measurement framework(PMF).

Chang

Introduce ARM SiP service

This patch adds ARM SiP service for use by ARM standard platforms.
This service is added to support the SMC interface for the Performance
measurement framework(PMF).

Change-Id: I26f5712f9ab54f5f721dd4781e35a16f40aacc44
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

show more ...