Merge "chore: update to use Arm word across TF-A" into integration

chore: update to use Arm word across TF-A

Align entire TF-A to use Arm in copyright header.

Change-Id: Ief9992169efdab61d0da6bd8c5180de7a4bc2244
Signed-off-by: Govindraj Raja <govindraj.raja@arm.co

chore: update to use Arm word across TF-A

Align entire TF-A to use Arm in copyright header.

Change-Id: Ief9992169efdab61d0da6bd8c5180de7a4bc2244
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>

show more ...

Merge "fix(fconf): make struct fconf_populator static" into integration

fix(fconf): make struct fconf_populator static

In FCONF_REGISTER_POPULATOR macro, add static for the fconf_populator
struct. This avoids this kind of sparse warning:
plat/st/common/stm32mp_fconf_io.

fix(fconf): make struct fconf_populator static

In FCONF_REGISTER_POPULATOR macro, add static for the fconf_populator
struct. This avoids this kind of sparse warning:
plat/st/common/stm32mp_fconf_io.c:181:1: warning:
symbol 'stm32mp_io__populator' was not declared. Should it be static?

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icaa7da3079e82497e112585150f6348ef2ebf5e6

show more ...

Merge "refactor(libc): clean up dependencies in libc" into integration

refactor(libc): clean up dependencies in libc

- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert

refactor(libc): clean up dependencies in libc

- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert.h. Removing
"platform_def.h" from assert.h and adding "common/debug.h"
where the macros are used.
- Removing hack for fixing PLAT_LOG_LEVEL_ASSERT to 40.
Instead removing assert with expression, as this
does not provide additional information.

Signed-off-by: Claus Pedersen <claustbp@google.com>
Change-Id: Icc201ea7b63c1277e423c1cfd13fd6816c2bc568

show more ...

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/a

Merge changes from topic "fw_config_handoff" into integration

* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/arm: Load and populate fw_config and tb_fw_config
fconf: Handle error from fconf_load_config
plat/arm: Update the fw_config load call and populate it's information
fconf: Allow fconf to load additional firmware configuration
fconf: Clean confused naming between TB_FW and FW_CONFIG
tbbr/dualroot: Add fw_config image in chain of trust
cert_tool: Update cert_tool for fw_config image support
fiptool: Add fw_config in FIP
plat/arm: Rentroduce tb_fw_config device tree

show more ...

fconf: Handle error from fconf_load_config

Updated 'fconf_load_config' function to return
the error.
Error from 'fconf_load_config" gets handled
by BL1 in subsequent patches.

Signed-off-by: Manish

fconf: Handle error from fconf_load_config

Updated 'fconf_load_config' function to return
the error.
Error from 'fconf_load_config" gets handled
by BL1 in subsequent patches.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4360f4df850e355b5762bb2d9666eb285101bc68

show more ...

fconf: Allow fconf to load additional firmware configuration

Modified the `fconf_load_config` function so that it can
additionally support loading of tb_fw_config along with
fw_config.

Signed-off-b

fconf: Allow fconf to load additional firmware configuration

Modified the `fconf_load_config` function so that it can
additionally support loading of tb_fw_config along with
fw_config.

Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie060121d367ba12e3fcac5b8ff169d415a5c2bcd

show more ...

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fc

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fconf: necessary modifications to support fconf in BL31 & SP_MIN
fconf: enhancements to firmware configuration framework

show more ...

fconf: enhancements to firmware configuration framework

A populate() function essentially captures the value of a property,
defined by a platform, into a fconf related c structure. Such a
callback i

fconf: enhancements to firmware configuration framework

A populate() function essentially captures the value of a property,
defined by a platform, into a fconf related c structure. Such a
callback is usually platform specific and is associated to a specific
configuration source.
For example, a populate() function which captures the hardware topology
of the platform can only parse HW_CONFIG DTB. Hence each populator
function must be registered with a specific 'config_type' identifier.
It broadly represents a logical grouping of configuration properties
which is usually a device tree source file.

Example:
> TB_FW: properties related to trusted firmware such as IO policies,
base address of other DTBs, mbedtls heap info etc.
> HW_CONFIG: properties related to hardware configuration of the SoC
such as topology, GIC controller, PSCI hooks, CPU ID etc.

This patch modifies FCONF_REGISTER_POPULATOR macro and fconf_populate()
to register and invoke the appropriate callbacks selectively based on
configuration type.

Change-Id: I6f63b1fd7a8729c6c9137d5b63270af1857bb44a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge "fconf: Fix misra issues" into integration

fconf: Fix misra issues

MISRA C-2012 Rule 20.7:
Macro parameter expands into an expression without being wrapped by parentheses.

MISRA C-2012 Rule 12.1:
Missing explicit parentheses on sub-expressi

fconf: Fix misra issues

MISRA C-2012 Rule 20.7:
Macro parameter expands into an expression without being wrapped by parentheses.

MISRA C-2012 Rule 12.1:
Missing explicit parentheses on sub-expression.

MISRA C-2012 Rule 18.4:
Essential type of the left hand operand is not the same as that of the right
operand.

Include does not provide any needed symbols.

Change-Id: Ie1c6451cfbc8f519146c28b2cf15c50b1f36adc8
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...

Merge changes from topic "lm/fconf" into integration

* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform

Merge changes from topic "lm/fconf" into integration

* changes:
arm-io: Panic in case of io setup failure
MISRA fix: Use boolean essential type
fconf: Add documentation
fconf: Move platform io policies into fconf
fconf: Add mbedtls shared heap as property
fconf: Add TBBR disable_authentication property
fconf: Add dynamic config DTBs info as property
fconf: Populate properties from dtb during bl2 setup
fconf: Load config dtb from bl1
fconf: initial commit

show more ...

fconf: Populate properties from dtb during bl2 setup

Use the dtb provided by bl1 as configuration file for fconf.

Change-Id: I3f466ad9b7047e1a361d94e71ac6d693e31496d9
Signed-off-by: Louis Mayencour

fconf: Populate properties from dtb during bl2 setup

Use the dtb provided by bl1 as configuration file for fconf.

Change-Id: I3f466ad9b7047e1a361d94e71ac6d693e31496d9
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...

fconf: Load config dtb from bl1

Move the loading of the dtb from arm_dym_cfg to fconf. The new loading
function is not associated to arm platform anymore, and can be moved
to bl_main if wanted.

Cha

fconf: Load config dtb from bl1

Move the loading of the dtb from arm_dym_cfg to fconf. The new loading
function is not associated to arm platform anymore, and can be moved
to bl_main if wanted.

Change-Id: I847d07eaba36d31d9d3ed9eba8e58666ea1ba563
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...

fconf: initial commit

Introduce the Firmware CONfiguration Framework (fconf).

The fconf is an abstraction layer for platform specific data, allowing
a "property" to be queried and a value retrieved

fconf: initial commit

Introduce the Firmware CONfiguration Framework (fconf).

The fconf is an abstraction layer for platform specific data, allowing
a "property" to be queried and a value retrieved without the requesting
entity knowing what backing store is being used to hold the data.

The default backing store used is C structure. If another backing store
has to be used, the platform integrator needs to provide a "populate()"
function to fill the corresponding C structure.
The "populate()" function must be registered to the fconf framework with
the "FCONF_REGISTER_POPULATOR()". This ensures that the function would
be called inside the "fconf_populate()" function.

A two level macro is used as getter:
- the first macro takes 3 parameters and converts it to a function
call: FCONF_GET_PROPERTY(a,b,c) -> a__b_getter(c).
- the second level defines a__b_getter(c) to the matching C structure,
variable, array, function, etc..

Ex: Get a Chain of trust property:
1) FCONF_GET_PROPERY(tbbr, cot, BL2_id) -> tbbr__cot_getter(BL2_id)
2) tbbr__cot_getter(BL2_id) -> cot_desc_ptr[BL2_id]

Change-Id: Id394001353ed295bc680c3f543af0cf8da549469
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

show more ...