Merge changes I3d950e72,Id315a8fe,Ib62e6e9b,I1d0475b2 into integration

* changes:
perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context
perf(psci): get PMF timestamps wi

Merge changes I3d950e72,Id315a8fe,Ib62e6e9b,I1d0475b2 into integration

* changes:
perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context
perf(psci): get PMF timestamps with no cache flushes if possible
perf(amu): greatly simplify AMU context management
perf(mpmm): greatly simplify MPMM enablement

show more ...

perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context

SVE and SME aren't enabled symmetrically for all worlds, but EL3 needs
to context switch them nonetheless. Previously,

perf(cm): drop ZCR_EL3 saving and some ISBs and replace them with root context

SVE and SME aren't enabled symmetrically for all worlds, but EL3 needs
to context switch them nonetheless. Previously, this had to happen by
writing the enable bits just before reading/writing the relevant
context. But since the introduction of root context, this need not be
the case. We can have these enables always be present for EL3 and save
on some work (and ISBs!) on every context switch.

We can also hoist ZCR_EL3 to a never changing register, as we set its
value to be identical for every world, which happens to be the one we
want for EL3 too.

Change-Id: I3d950e72049a298008205ba32f230d5a5c02f8b0
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge changes from topic "mp/simd_ctxt_mgmt" into integration

* changes:
feat(fvp): allow SIMD context to be put in TZC DRAM
docs(simd): introduce CTX_INCLUDE_SVE_REGS build flag
feat(fvp): ad

Merge changes from topic "mp/simd_ctxt_mgmt" into integration

* changes:
feat(fvp): allow SIMD context to be put in TZC DRAM
docs(simd): introduce CTX_INCLUDE_SVE_REGS build flag
feat(fvp): add Cactus partition manifest for EL3 SPMC
chore(simd): remove unused macros and utilities for FP
feat(el3-spmc): support simd context management upon world switch
feat(trusty): switch to simd_ctx_save/restore apis
feat(pncd): switch to simd_ctx_save/restore apis
feat(spm-mm): switch to simd_ctx_save/restore APIs
feat(simd): add rules to rationalize simd ctxt mgmt
feat(simd): introduce simd context helper APIs
feat(simd): add routines to save, restore sve state
feat(simd): add sve state to simd ctxt struct
feat(simd): add data struct for simd ctxt management

show more ...

feat(simd): add routines to save, restore sve state

This adds assembly routines to save and restore SVE registers. In order
to share between FPU and SVE the code to save and restore FPCR and
FPSR, t

feat(simd): add routines to save, restore sve state

This adds assembly routines to save and restore SVE registers. In order
to share between FPU and SVE the code to save and restore FPCR and
FPSR, the patch converts code for those registers into macro.
Since we will be using simd_ctx_t to save and restore FPU also, we use
offsets in simd_ctx_t for FPSR and FPCR. Since simd_ctx_t has the same
structure at the beginning as fp_regs_t, those offsets should be the
same as CTX_FP_* offsets, when SVE is not enabled. Note that the code
also saves and restores FPEXC32 reg along with FPSR and FPCR.

Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I120c02359794aa6bb6376a464a9afe98bd84ae60

show more ...

Merge "refactor(cm): move EL3 registers to global context" into integration

refactor(cm): move EL3 registers to global context

Currently, EL3 context registers are duplicated per-world per-cpu.
Some registers have the same value across all CPUs, so this patch
moves these re

refactor(cm): move EL3 registers to global context

Currently, EL3 context registers are duplicated per-world per-cpu.
Some registers have the same value across all CPUs, so this patch
moves these registers out into a per-world context to reduce
memory usage.

Change-Id: I91294e3d5f4af21a58c23599af2bdbd2a747c54a
Signed-off-by: Elizabeth Ho <elizabeth.ho@arm.com>
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge changes from topic "bk/context_refactor" into integration

* changes:
refactor(amu): separate the EL2 and EL3 enablement code
refactor(cpufeat): separate the EL2 and EL3 enablement code

refactor(cpufeat): separate the EL2 and EL3 enablement code

Combining the EL2 and EL3 enablement code necessitates that it must be
called at el3_exit, which is the only place with enough context to

refactor(cpufeat): separate the EL2 and EL3 enablement code

Combining the EL2 and EL3 enablement code necessitates that it must be
called at el3_exit, which is the only place with enough context to make
the decision of what needs to be set.
Decouple them to allow them to be called from elsewhere.

Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I147764c42771e7d4100699ec8fae98dac0a505c0

show more ...

Merge changes from topic "jc/cpu_feat" into integration

* changes:
feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED
feat(cpufeat): enable FEAT_SME for FEAT_STATE_CHECKED

feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function

feat(cpufeat): enable FEAT_SVE for FEAT_STATE_CHECKED

Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SVE specific setup.

Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.

Change-Id: I1caaba2216e8e2a651452254944a003607503216
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>

show more ...

Merge "feat(sme): enable SME functionality" into integration

feat(sme): enable SME functionality

This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively.

feat(sme): enable SME functionality

This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.

The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.

Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73

show more ...

Merge "feat(sve): enable SVE for the secure world" into integration

feat(sve): enable SVE for the secure world

Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is conf

feat(sve): enable SVE for the secure world

Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.

Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116

show more ...

Merge pull request #1651 from antonio-nino-diaz-arm/an/rand-misra

Fix some MISRA defects

Fix MISRA defects in extension libs

No functional changes.

Change-Id: I2f28f20944f552447ac4e9e755493cd7c0ea1192
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1272 from dp-arm/dp/extensions

Refactor SPE/SVE code and fix some bugs in AMUv1 on AArch32

Implement {spe,sve}_supported() helpers and refactor code

Implement helpers to test if the core supports SPE/SVE. We have a
similar helper for AMU and this patch makes all extensions consistent
in

Implement {spe,sve}_supported() helpers and refactor code

Implement helpers to test if the core supports SPE/SVE. We have a
similar helper for AMU and this patch makes all extensions consistent
in their implementation.

Change-Id: I3e6f7522535ca358259ad142550b19fcb883ca67
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

show more ...

Merge pull request #1178 from davidcunado-arm/dc/enable_sve

Enable SVE for Non-secure world

Enable SVE for Non-secure world

This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering

Enable SVE for Non-secure world

This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.

If SVE is implemented, EL3 will do the following:

- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.

- Exit from Non-secure world: SIMD, FP and SVE functionality is
disabled. As SIMD and FP registers are part of the SVE Z-registers
then any use of SIMD / FP functionality would corrupt the SVE
registers.

The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.

This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.

Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. Existing Secure-EL1 Payloads will not work on
such platforms unless ENABLE_SVE_FOR_NS is set to 0.

Additionally, on the first entry into the Non-secure world the SVE
functionality is enabled and the SVE Z-register length is set to the
maximum size allowed by the architecture. This includes the use case
where EL2 is implemented but not used.

Change-Id: Ie2d733ddaba0b9bef1d7c9765503155188fe7dae
Signed-off-by: David Cunado <david.cunado@arm.com>

show more ...