fix(gicv3): map generic interrupt type to GICv3 group

The generic interrupt controller identifies an interrupt based on its
type whereas the GIC uses the notion of groups to identify an
interrupt.

fix(gicv3): map generic interrupt type to GICv3 group

The generic interrupt controller identifies an interrupt based on its
type whereas the GIC uses the notion of groups to identify an
interrupt.

Currently, they are used interchangeably in GICv3 driver. It did not
cause any functional issues since the matching type and group had the
same value for corresponding macros. This patch makes the necessary
fixes.

The generic interrupt controller APIs, such as
plat_ic_set_interrupt_type map interrupt type to interrupt group
supported by the GICv3 IP. Similarly, other generic interrupt
controller APIs map interrupt group to interrupt type as needed.

This patch also changes the name of the helper functions to use group
rather than type for handling interrupts.

Change-Id: Ie2d88a3260c71e4ab9c8baacde24cc21e551de3d
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

chore(gicv2): use interrupt group instead of type

The generic interrupt controller identifies an interrupt based on its
type whereas the GIC uses the notion of groups to identify an
interrupt.

This

chore(gicv2): use interrupt group instead of type

The generic interrupt controller identifies an interrupt based on its
type whereas the GIC uses the notion of groups to identify an
interrupt.

This patch changes the name of the helper functions to use group
rather than type for handling interrupts. No functional change in this
patch.

Change-Id: If13ec65cc6c87c2da73a3d54b033f02635ff924a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge "fix(st-ddr): express memory size with size_t type" into integration

Merge "feat(ethos-n): update npu error handling" into integration

fix(st-ddr): express memory size with size_t type

Express memory size with size_t type in structures.
Retrieve value as uint32_t from device tree and then cast it to size_t.
Combined with uintptr_t

fix(st-ddr): express memory size with size_t type

Express memory size with size_t type in structures.
Retrieve value as uint32_t from device tree and then cast it to size_t.
Combined with uintptr_t use, it ensures a generic algorithm whatever
the platform architecture, notably within systematic tests. Adapt also
their prototypes.

Move memory size print outside stm32mp_ddr_check_size() to adapt it to
related platform.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ic6e1a62d7a5e23cef49909a658098c800e7dae3f

show more ...

feat(st): add RCC registers list

Add a header file listing the registers of Reset and Clock Control
peripheral.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icc90132d5782eba7e343868

feat(st): add RCC registers list

Add a header file listing the registers of Reset and Clock Control
peripheral.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icc90132d5782eba7e343868b932a399c1d47c18a

show more ...

fix(cadence): update console flush uart driver

The implementation of code changes manages the transmit FIFO (TxFIFO)
in the UART driver. The added code snippet includes a sequence of
instructions th

fix(cadence): update console flush uart driver

The implementation of code changes manages the transmit FIFO (TxFIFO)
in the UART driver. The added code snippet includes a sequence of
instructions that ensures efficient handling of data transmission
and synchronization with the host software.

The code first checks the TxFIFO empty flag to determine whether
there is data available for transmission. If the TxFIFO is not empty,
the code waits until it becomes empty, ensuring that the transmit
operation is synchronized with the availability of data.
Subsequently, the code monitors the transmit operation's activity
status. It waits until the transmit operation becomes inactive,
indicating the completion of the previous transmission.

This synchronization step ensures that new data can be added to the
TxFIFO without causing any loss of transmission time.

Update console_flush() function, the function waits for the
Transmitter FIFO to empty and checks the transmitter's active state.
If the transmitter is in an active state, it means it is currently
shifting out a character.

Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Change-Id: I9d6c05bdfb9270924b40bf1f6ecb5fe541a2242e

show more ...

fix(scmi): add parameter for plat_scmi_clock_rates_array

Pass "start_idx" to plat_scmi_clock_rates_array.
This parameter is required to obtain the rate table
a second time.

Signed-off-by: XiaoDong

fix(scmi): add parameter for plat_scmi_clock_rates_array

Pass "start_idx" to plat_scmi_clock_rates_array.
This parameter is required to obtain the rate table
a second time.

Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Change-Id: I97c6751e7d34c839ced8f22bddc39fb534978cc4

show more ...

feat(ethos-n): update npu error handling

Changes have been made in NPU firmware version 13 around error handling
which require some different register values to be set in AUXCTLR and
SYSCTRL1.

SiP

feat(ethos-n): update npu error handling

Changes have been made in NPU firmware version 13 around error handling
which require some different register values to be set in AUXCTLR and
SYSCTRL1.

SiP service version number has been bumped up to 15 to reflect these
changes.

Change-Id: I6cda0048dc75df2150f7a0fe25f12ba6bf119ced
Signed-off-by: Rob Hughes <robert.hughes@arm.com>

show more ...

Merge changes from topic "mb/mb-signer-id" into integration

* changes:
feat(qemu): add dummy plat_mboot_measure_key() function
docs(rss): update RSS doc for signer-ID
feat(imx): add dummy 'pla

Merge changes from topic "mb/mb-signer-id" into integration

* changes:
feat(qemu): add dummy plat_mboot_measure_key() function
docs(rss): update RSS doc for signer-ID
feat(imx): add dummy 'plat_mboot_measure_key' function
feat(tc): implement platform function to measure and publish Public Key
feat(auth): measure and publicise the Public Key
feat(fvp): implement platform function to measure and publish Public Key
feat(fvp): add public key-OID information in RSS metadata structure
feat(auth): add explicit entries for key OIDs
feat(rss): set the signer-ID in the RSS metadata
feat(auth): create a zero-OID for Subject Public Key
docs: add details about plat_mboot_measure_key function
feat(measured-boot): introduce platform function to measure and publish Public Key

show more ...

feat(rss): set the signer-ID in the RSS metadata

Calculate a hash of the public key and put that into the signer-ID
field of the relevant RSS metadata. The signer-ID metadata is mandatory
in the Arm

feat(rss): set the signer-ID in the RSS metadata

Calculate a hash of the public key and put that into the signer-ID
field of the relevant RSS metadata. The signer-ID metadata is mandatory
in the Arm CCA attestation scheme.

Change-Id: Ic846d8bf882cfea8581d3523a3461c919462df30
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(nuvoton): added support for npcm845x chip

Initial version

Signed-off-by: Margarita Glushkin <rutigl@gmail.com>
Change-Id: If433d325a90b519ae5f02411865bffd368ff2824

Merge changes from topic "agilex5" into integration

* changes:
feat(intel): platform enablement for Agilex5 SoC FPGA
feat(intel): ccu driver for Agilex5 SoC FPGA
feat(intel): vab support for A

Merge changes from topic "agilex5" into integration

* changes:
feat(intel): platform enablement for Agilex5 SoC FPGA
feat(intel): ccu driver for Agilex5 SoC FPGA
feat(intel): vab support for Agilex5 SoC FPGA
feat(intel): sdmmc/nand/combo-phy/qspi driver for Agilex5 SoC FPGA
feat(intel): ddr driver for Agilex5 SoC FPGA
feat(intel): power manager for Agilex5 SoC FPGA
feat(intel): cold/warm reset and smp support for Agilex5 SoC FPGA
feat(intel): reset manager support for Agilex5 SoC FPGA
feat(intel): mailbox and SMC support for Agilex5 SoC FPGA
feat(intel): system manager support for Agilex5 SoC FPGA
feat(intel): memory controller support for Agilex5 SoC FPGA
feat(intel): clock manager support for Agilex5 SoC FPGA
feat(intel): mmc support for Agilex5 SoC FPGA
feat(intel): uart support for Agilex5 SoC FPGA
feat(intel): pinmux, peripheral and Handoff support for Agilex5 SoC FPGA

show more ...

Merge changes from topic "imx93_basic_support" into integration

* changes:
docs(imx9): add imx93 platform
feat(imx93): add OPTEE support
feat(imx93): protect OPTEE memory to secure access only

Merge changes from topic "imx93_basic_support" into integration

* changes:
docs(imx9): add imx93 platform
feat(imx93): add OPTEE support
feat(imx93): protect OPTEE memory to secure access only
feat(imx93): add cpuidle and basic suspend support
feat(imx93): add reset & poweroff support
feat(imx93): allow SoC masters access to system TCM
feat(imx93): update the ocram trdc config for did10
feat(imx93): add the basic support
feat(imx93): add the trdc driver
build(changelog): add new scopes for nxp imx platform

show more ...

feat(intel): sdmmc/nand/combo-phy/qspi driver for Agilex5 SoC FPGA

This patch is used to implement sdmmc/nand/combo-phy
driver to support Cadence IP for Agilex5 SoC FPGA.
1. Added SDMMC/NAND/COMBO-

feat(intel): sdmmc/nand/combo-phy/qspi driver for Agilex5 SoC FPGA

This patch is used to implement sdmmc/nand/combo-phy
driver to support Cadence IP for Agilex5 SoC FPGA.
1. Added SDMMC/NAND/COMBO-PHY support.
2. Updated product name -> Agilex5
3. Updated QSPI base address

Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I6db689d2b784c9f59a25701ab34517f6f6b0a0e6

show more ...

refactor(rss): make RSS driver standalone for Measured Boot

Currently, Measured Boot RSS driver gathers data from platform calls,
specifically RSS metadata. Generally, the driver should use the leas

refactor(rss): make RSS driver standalone for Measured Boot

Currently, Measured Boot RSS driver gathers data from platform calls,
specifically RSS metadata. Generally, the driver should use the least
amount of platform calls possible, and the platform should provide the
data directly to the driver via the driver interface.

For this purpose, RSS Measured Boot driver interface APIs were updated
and platform calls were removed from RSS Measured Boot driver.

Change-Id: I6c797d9ac2d70215f32a084a7643884b399ee28c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

show more ...

feat(imx93): add the trdc driver

Add the trdc driver that is used on NXP i.MX9 family

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ie1fd86b76564fa7e20d74d5b4dbfe7ea0ee851fc

fix(spi-nand): add Quad Enable management

The framework currently supports QE feature only for Macronix devices.
Kioxia devices also support this feature, but this feature can not be
set based on th

fix(spi-nand): add Quad Enable management

The framework currently supports QE feature only for Macronix devices.
Kioxia devices also support this feature, but this feature can not be
set based on the manufacturer ID as Kioxia first SPI NAND generation
does not support the QE feature when the second generation does.

Use a flag to manage QE feature. This flag will be added at board level
to manage the device.

Change-Id: I7a3683a2df8739967b17b4abbec32c51bf206b93
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>

show more ...

Merge changes I1bfa797e,I0ec7a70e into integration

* changes:
fix(tree): correct some typos
fix(rockchip): use semicolon instead of comma

fix(tree): correct some typos

found using codespell (https://github.com/codespell-project/codespell).

Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6

fix(tree): correct some typos

found using codespell (https://github.com/codespell-project/codespell).

Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6373

show more ...

Merge changes I06b35f11,If80573d6 into integration

* changes:
docs: remove plat_convert_pk() interface from release doc
chore(io): remove io_dummy driver

Merge changes from topic "assert_boolean_set" into integration

* changes:
build!: check boolean flags are not empty
fix(build): add a default value for INVERTED_MEMMAP
fix(a5ds): add default v

Merge changes from topic "assert_boolean_set" into integration

* changes:
build!: check boolean flags are not empty
fix(build): add a default value for INVERTED_MEMMAP
fix(a5ds): add default value for ARM_DISABLE_TRUSTED_WDOG
fix(st-crypto): move flag control into source code
fix(stm32mp1): always define PKA algos flags
fix(stm32mp1): remove boolean check on PLAT_TBBR_IMG_DEF

show more ...

feat(sbsa): helper api for refreshing watchdog timer

This patch adds a helper API to explicitly refresh SBSA secure watchdog
timer. Please refer section A.3 of the following spec:

https://developer

feat(sbsa): helper api for refreshing watchdog timer

This patch adds a helper API to explicitly refresh SBSA secure watchdog
timer. Please refer section A.3 of the following spec:

https://developer.arm.com/documentation/den0029/latest/

Change-Id: I2d0943792aea0092bee1e51d74b908348587e66b
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

fix(st-crypto): move flag control into source code

Remove the control from the include file to avoid compilation
issue. Add the check in the source code instead.

Signed-off-by: Lionel Debieve <lion

fix(st-crypto): move flag control into source code

Remove the control from the include file to avoid compilation
issue. Add the check in the source code instead.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I533f829607f76389399a3e8dbc3c6095278562ab

show more ...

chore(io): remove io_dummy driver

In accordance with [1], delete the io_dummy driver code in preparation
for the v2.9 release.

[1] https://trustedfirmware-a.readthedocs.io/en/latest/about/release-i

chore(io): remove io_dummy driver

In accordance with [1], delete the io_dummy driver code in preparation
for the v2.9 release.

[1] https://trustedfirmware-a.readthedocs.io/en/latest/about/release-information.html

Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: If80573d6f889624ef06b099fd267ee85f3a6331e

show more ...