Merge "refactor(libc): clean up dependencies in libc" into integration

refactor(libc): clean up dependencies in libc

- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert

refactor(libc): clean up dependencies in libc

- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert.h. Removing
"platform_def.h" from assert.h and adding "common/debug.h"
where the macros are used.
- Removing hack for fixing PLAT_LOG_LEVEL_ASSERT to 40.
Instead removing assert with expression, as this
does not provide additional information.

Signed-off-by: Claus Pedersen <claustbp@google.com>
Change-Id: Icc201ea7b63c1277e423c1cfd13fd6816c2bc568

show more ...

Merge changes from topic "rk3288" into integration

* changes:
rockchip: document platform
rockchip: add support for rk3288
rockchip: add common aarch32 support
rockchip: rk3328: drop double

Merge changes from topic "rk3288" into integration

* changes:
rockchip: document platform
rockchip: add support for rk3288
rockchip: add common aarch32 support
rockchip: rk3328: drop double declaration of entry_point storage
rockchip: Allow socs with undefined wfe check bits
rockchip: move pmusram assembler code to a aarch64 subdir
sp_min: allow inclusion of a platform-specific linker script
sp_min: make sp_min_warm_entrypoint public
drivers: ti: uart: add a aarch32 variant

show more ...

sp_min: make sp_min_warm_entrypoint public

Similar to bl31_warm_entrypoint, sp_min-based platforms may need
that for special resume handling.

Therefore move it from the private header to the sp_min

sp_min: make sp_min_warm_entrypoint public

Similar to bl31_warm_entrypoint, sp_min-based platforms may need
that for special resume handling.

Therefore move it from the private header to the sp_min platform header.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I40d9eb3ff77cff88d47c1ff51d53d9b2512cbd3e

show more ...

Merge pull request #1673 from antonio-nino-diaz-arm/an/headers

Standardise header guards across codebase

Standardise header guards across codebase

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this proje

Standardise header guards across codebase

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated

Remove deprecated interfaces for all platforms

Remove deprecated early platform setup interfaces

The affected interfaces are bl31_early_platform_setup(),
sp_min_early_platform_setup() and bl2_early_platform_setup().

Change-Id: I50c01ec68bcbe97f

Remove deprecated early platform setup interfaces

The affected interfaces are bl31_early_platform_setup(),
sp_min_early_platform_setup() and bl2_early_platform_setup().

Change-Id: I50c01ec68bcbe97fe4e5d101bcd0f763358b8e1e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1263 from soby-mathew/sm/dyn_config

Dynamic Configuration Prototype

Introduce the new BL handover interface

This patch introduces a new BL handover interface. It essentially allows
passing 4 arguments between the different BL stages. Effort has been made
so as to be

Introduce the new BL handover interface

This patch introduces a new BL handover interface. It essentially allows
passing 4 arguments between the different BL stages. Effort has been made
so as to be compatible with the previous handover interface. The previous
blx_early_platform_setup() platform API is now deprecated and the new
blx_early_platform_setup2() variant is introduced. The weak compatiblity
implementation for the new API is done in the `plat_bl_common.c` file.
Some of the new arguments in the new API will be reserved for generic
code use when dynamic configuration support is implemented. Otherwise
the other registers are available for platform use.

Change-Id: Ifddfe2ea8e32497fe1beb565cac155ad9d50d404
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

show more ...

Merge pull request #977 from etienne-lms/sp-min-fiq

bl32: add secure interrupt handling in AArch32 sp_min

bl32: add secure interrupt handling in AArch32 sp_min

Add support for a minimal secure interrupt service in sp_min for
the AArch32 implementation. Hard code that only FIQs are handled.

Introduce bo

bl32: add secure interrupt handling in AArch32 sp_min

Add support for a minimal secure interrupt service in sp_min for
the AArch32 implementation. Hard code that only FIQs are handled.

Introduce bolean build directive SP_MIN_WITH_SECURE_FIQ to enable
FIQ handling from SP_MIN.

Configure SCR[FIQ] and SCR[FW] from generic code for both cold and
warm boots to handle FIQ in secure state from monitor.

Since SP_MIN architecture, FIQ are always trapped when system executes
in non secure state. Hence discard relay of the secure/non-secure
state in the FIQ handler.

Change-Id: I1f7d1dc7b21f6f90011b7f3fcd921e455592f5e7
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

show more ...

Merge pull request #983 from dp-arm/dp/aarch32-errata

aarch32: Implement errata workarounds for Cortex A53 and A57

sp_min: Implement `sp_min_plat_runtime_setup()`

On ARM platforms before exiting from SP_MIN ensure that
the default console is switched to the runtime serial port.

Change-Id: I0ca0d42cc47e345d56179

sp_min: Implement `sp_min_plat_runtime_setup()`

On ARM platforms before exiting from SP_MIN ensure that
the default console is switched to the runtime serial port.

Change-Id: I0ca0d42cc47e345d56179eac16aa3d6712767c9b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

show more ...

Merge pull request #925 from dp-arm/dp/spdx

Use SPDX license identifiers

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

show more ...

Merge pull request #713 from yatharth-arm/yk/AArch32_porting

Add basic AArch32 support for BL1 & BL2

AArch32: Support in SP_MIN to receive arguments from BL2

This patch adds support in SP_MIN to receive generic and
platform specific arguments from BL2.

The new signature is as following:
void s

AArch32: Support in SP_MIN to receive arguments from BL2

This patch adds support in SP_MIN to receive generic and
platform specific arguments from BL2.

The new signature is as following:
void sp_min_early_platform_setup(void *from_bl2,
void *plat_params_from_bl2);

ARM platforms have been modified to use this support.

Note: Platforms may break if using old signature.
Default value for RESET_TO_SP_MIN is changed to 0.

Change-Id: I008d4b09fd3803c7b6231587ebf02a047bdba8d0

show more ...

Merge pull request #678 from soby-mathew/sm/PSCI_AArch32

Introduce AArch32 support for PSCI library

AArch32: add a minimal secure payload (SP_MIN)

This patch adds a minimal AArch32 secure payload SP_MIN. It relies on PSCI
library to initialize the normal world context. It runs in Monitor mode
and

AArch32: add a minimal secure payload (SP_MIN)

This patch adds a minimal AArch32 secure payload SP_MIN. It relies on PSCI
library to initialize the normal world context. It runs in Monitor mode
and uses the runtime service framework to handle SMCs. It is added as
a BL32 component in the Trusted Firmware source tree.

Change-Id: Icc04fa6b242025a769c1f6c7022fde19459c43e9

show more ...