Merge changes I8d62253e,I320a0585 into integration

* changes:
feat(stm32mp2): initialize gic and delay timer in bl31_plat_arch_setup
feat(stm32mp2): add BL31 device tree support

feat(stm32mp2): add BL31 device tree support

BL31 will need to access a device tree for several configurations (UART,
GIC, OTP mapping...).
Create a BL31 device tree (SOC_FW_CONFIG). It is loaded in

feat(stm32mp2): add BL31 device tree support

BL31 will need to access a device tree for several configurations (UART,
GIC, OTP mapping...).
Create a BL31 device tree (SOC_FW_CONFIG). It is loaded in DDR, in a
spare area.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I320a05859e1aa3dd8db9a274e7201075a8c250c2

show more ...

Merge changes I09ab0a5c,I87d0a492,I613a52ae,I2fcd8d32,Ie91527a7, ... into integration

* changes:
feat(stm32mp2): manage DDR FW via FIP
feat(stm32mp2): introduce DDR type compilation flags
feat

Merge changes I09ab0a5c,I87d0a492,I613a52ae,I2fcd8d32,Ie91527a7, ... into integration

* changes:
feat(stm32mp2): manage DDR FW via FIP
feat(stm32mp2): introduce DDR type compilation flags
feat(stm32mp2): add RISAB registers description
feat(stm32mp2-fdts): add BL31 info in fw-config
feat(stm32mp2): add minimal support for BL31
feat(st): manage BL31 FCONF load_info struct

show more ...

feat(stm32mp2): manage DDR FW via FIP

This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.

DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the

feat(stm32mp2): manage DDR FW via FIP

This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.

DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the SRAM1 will be allocated to TF-A.
RISAB3 has to be configured to allow access to SRAM1.
Add image ID and update maximum number on platform side also.

Fill related descriptor information, add policy and update numbers.
DDR_TYPE variable is used to identify binary file, and image is now
added in the fiptool command line.

The DDR PHY firmware is not in TF-A repository. It can be found at
https://github.com/STMicroelectronics/stm32-ddr-phy-binary
To ease the selection of the firmware path, STM32MP_DDR_FW_PATH is added
to platform.mk file.

Change-Id: I09ab0a5c63406055a7b5ccd16d65e443de47ca2f
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>

show more ...

Merge changes from topic "stm32mp2_bl2_updates" into integration

* changes:
feat(stm32mp2): load fw-config file
feat(stm32mp2): add fw-config compilation
feat(stm32mp2-fdts): add fw-config fil

Merge changes from topic "stm32mp2_bl2_updates" into integration

* changes:
feat(stm32mp2): load fw-config file
feat(stm32mp2): add fw-config compilation
feat(stm32mp2-fdts): add fw-config files for STM32MP257F-EV1
feat(stm32mp2-fdts): add fw-config file
feat(stm32mp2-fdts): add clock tree for STM32MP257F-EV1
feat(stm32mp2): enable DDR sub-system clock
feat(stm32mp2): add fixed regulators support
feat(stm32mp2): print board info
feat(stm32mp2): display CPU info
feat(stm32mp2): get chip ID
feat(stm32mp2): add BL2 boot first steps
feat(stm32mp2): add defines for the PWR peripheral
feat(stm32mp2-fdts): add SD-card and eMMC support on STM32MP257F-EV1
feat(stm32mp2-fdts): add sdmmc pins definition
feat(stm32mp2-fdts): add sdmmc nodes in SoC DT file
feat(stm32mp2-fdts): add io_policies
feat(stm32mp2-fdts): remove pins-are-numbered

show more ...

feat(stm32mp2-fdts): add sdmmc nodes in SoC DT file

Add the sdmmc1 & sdmmc2 nodes in stm32mp251.dtsi file, to support
eMMC or SD-cards.
To avoid increasing DT size if SD-card or eMMC boot is not sel

feat(stm32mp2-fdts): add sdmmc nodes in SoC DT file

Add the sdmmc1 & sdmmc2 nodes in stm32mp251.dtsi file, to support
eMMC or SD-cards.
To avoid increasing DT size if SD-card or eMMC boot is not selected,
the nodes are removed from DT thanks to stm32mp25-bl2.dtsi overlay.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2ed841442b7dddf0c441ae3b3d2462ef535f9951

show more ...

feat(stm32mp2-fdts): add io_policies

This will be required for FCONF management on STM32MP2.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If651a9aa36cdf415f570b2392daa08c198d629d2

Merge "feat(st): update STM32MP DT files" into integration

feat(st): update STM32MP DT files

This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, a

feat(st): update STM32MP DT files

This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415

show more ...

Merge changes from topic "stm32mp2" into integration

* changes:
feat(stm32mp2): generate stm32 file
feat(stm32mp2-fdts): add stm32mp257f-ev1 board
feat(stm32mp2-fdts): introduce stm32mp25 pinc

Merge changes from topic "stm32mp2" into integration

* changes:
feat(stm32mp2): generate stm32 file
feat(stm32mp2-fdts): add stm32mp257f-ev1 board
feat(stm32mp2-fdts): introduce stm32mp25 pinctrl files
feat(stm32mp2-fdts): introduce stm32mp25 SoCs family
feat(stm32mp2): add console configuration
feat(st): add RCC registers list
feat(st-uart): add AARCH64 stm32_console driver
feat(st): introduce new platform STM32MP2
feat(dt-bindings): add the STM32MP2 clock and reset bindings
docs(changelog): add scopes for STM32MP2
feat(docs): introduce STM32MP2 doc
refactor(docs): add a sub-menu for ST platforms
refactor(st): move plat_image_load.c
refactor(st): rename PLAT_NB_FIXED_REGS
refactor(st): move some storage definitions to common part
refactor(st): move SDMMC definitions to driver
feat(st-clock): stub fdt_get_rcc_secure_state
feat(st-clock): allow aarch64 compilation of STGEN functions
feat(st): allow AARCH64 compilation for common code
refactor(st): rename QSPI macros

show more ...

feat(stm32mp2-fdts): add stm32mp257f-ev1 board

Add STM32MP257F Evaluation board support. It embeds a STM32MP257FAI
SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2
typeC, SNOR Octo

feat(stm32mp2-fdts): add stm32mp257f-ev1 board

Add STM32MP257F Evaluation board support. It embeds a STM32MP257FAI
SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2
typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ...

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I92da3a7085a4d2f2d606777c4215aed55f77c589

show more ...