| #
067cb3ae |
| 28-Apr-2021 |
Manish Pandey <manish.pandey2@arm.com> |
Merge changes I2c9aecc9,Ie6a019f4,Ief6f0a63,Iec9c80f2 into integration
* changes:
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
fdts: stm32mp1: add alternative SDMMC2 pins to t
Merge changes I2c9aecc9,Ie6a019f4,Ief6f0a63,Iec9c80f2 into integration
* changes:
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
fdts: stm32mp1: add alternative SDMMC2 pins to the pinctrl
fdts: stm32mp1: add I2C2 pins in the pinctrl
fdts: stm32mp1: add the I2C2 peripheral in the SoC DTS
show more ...
|
| #
c3c6732f |
| 21-Apr-2021 |
Grzegorz Szymaszek <gszymaszek@short.pl> |
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the
STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the
STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and a
cryptographic processor) the STPMIC1A PMIC, 512 MB of DDR3 RAM and a
4 GB eMMC. There are two LEDs as well, one hardwired to the PMIC’s VDD
output, and the other available at the MPU’s port PG3. The SoM can be
plugged into a carrier board using its three 70‑pin connectors.
Seeed Odyssey‐STM32MP157C is the reference carrier board for the SoM in
a Raspberry Pi‐like form factor. It features a WiFi/Bluetooth chip, a
microSD card port and various I/O interfaces.
The device tree is based on the DKx boards. TF‑A was successfully tested
on the board with Buildroot 2021.02 and U-Boot 2021.04.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Change-Id: I2c9aecc925561e8d338dddbb192d3bb23a533914
show more ...
|