Merge changes from topic "st_clk_update" into integration

* changes:
feat(st-clock): use early traces
fix(st-clock): adapt order of CSS on LSE and HSE
refactor(st-clock): remove unused struct

Merge changes from topic "st_clk_update" into integration

* changes:
feat(st-clock): use early traces
fix(st-clock): adapt order of CSS on LSE and HSE
refactor(st-clock): remove unused struct
feat(stm32mp1-fdts): remove RTC clock configuration
refactor(st-clock): move stm32mp1_clk_rcc_regs_*lock
refactor(st-clock): driver size optimization
refactor(st-clock): remove BL32 support on STM32MP13
feat(st-clock): don't gate/ungate an oscillator if it is not wired
feat(dt-bindings): add missing SPIx bus clocks
feat(stm32mp1-fdts): remove PLL1 settings
feat(st-clock): update with new bindings
feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1
feat(dt-bindings): new RCC DT bindings
feat(stm32mp1): always boot at 650MHz
refactor(st-clock): remove LSEDRV_MEDIUM_HIGH for STM32MP13
fix(st-clock): display proper PLL number for STM32MP13
fix(st-clock): do not reconfigure LSE
feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation
refactor(st-clock): remove unused clk function in API
refactor(st-clock): support deactivated STGEN in stm32mp_stgen_config
feat(st-clock): add function to restore generic timer rate

show more ...

feat(stm32mp1-fdts): remove PLL1 settings

TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.

Change-Id: I0003337d8d37d

feat(stm32mp1-fdts): remove PLL1 settings

TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.

Change-Id: I0003337d8d37df7b2a70a84b5475f4278c4c4669
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

show more ...

feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1

RCC bindings alignment with MP13 RCC bindings

Change-Id: I02c89accd51e4214cd009d4a9433d8d9b6aeba25
Signed-off-by: Gabriel Fernandez <gabriel.fe

feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1

RCC bindings alignment with MP13 RCC bindings

Change-Id: I02c89accd51e4214cd009d4a9433d8d9b6aeba25
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

show more ...

feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation

LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG

feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation

LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG fifo ready in less than 50µs.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I76d1fe58e2f4d5416a96f48123ae36bd82d8a8ee

show more ...

Merge changes from topic "st-bsec-otp" into integration

* changes:
feat(stm32mp2-fdts): add board ID OTP in STM32MP257F-EV1
feat(stm32mp2-fdts): add OTP nodes in STM32MP251 SoC DT file
fix(stm

Merge changes from topic "st-bsec-otp" into integration

* changes:
feat(stm32mp2-fdts): add board ID OTP in STM32MP257F-EV1
feat(stm32mp2-fdts): add OTP nodes in STM32MP251 SoC DT file
fix(stm32mp2): add missing include
feat(st): do not directly call BSEC functions in common code
feat(st): use stm32_get_otp_value_from_idx() in BL31
refactor(st): update test for closed chip
refactor(st-bsec): improve BSEC driver
refactor(st): use dashes for BSEC node names

show more ...

refactor(st): use dashes for BSEC node names

This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it

refactor(st): use dashes for BSEC node names

This is something commonly asked by Linux kernel DT maintainers [1].
The mentioned doc is not upstreamed, but may be checked with dtbs_check.
While at it align some nodes with Linux or OP-TEE.

[1] https://lore.kernel.org/linux-arm-kernel/20231125184422.12315-1-krzysztof.kozlowski@linaro.org/

Change-Id: I63e983c2a00eda3cd8b81c66c0cd1a97cf8249b7
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

Merge changes from topic "stm32mp15-dt-updates" into integration

* changes:
refactor(stm32mp15-fdts): remove timers15 node
refactor(stm32mp15-fdts): remove unused secure-status properties
refa

Merge changes from topic "stm32mp15-dt-updates" into integration

* changes:
refactor(stm32mp15-fdts): remove timers15 node
refactor(stm32mp15-fdts): remove unused secure-status properties
refactor(stm32mp15-fdts): remove RCC secure-status

show more ...

refactor(stm32mp15-fdts): remove RCC secure-status

The RCC security is managed with a dedicated compatible:
"st,stm32mp1-rcc-secure" [1].
Remove useless secure-status property in boards rcc nodes.

refactor(stm32mp15-fdts): remove RCC secure-status

The RCC security is managed with a dedicated compatible:
"st,stm32mp1-rcc-secure" [1].
Remove useless secure-status property in boards rcc nodes.

[1] 812daf916c ("feat(st): update the security based on new compatible")

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iff31044ade78dd9c432120dce65375fe2b0d36d6

show more ...

Merge "fix(stm32mp1): fdts: stm32mp1: align DDR regulators with new driver" into integration

fix(stm32mp1): fdts: stm32mp1: align DDR regulators with new driver

With recent changes, TF-A now panics on MC-1, Avenger96 and Odyssey:

NOTICE: CPU: STM32MP157C?? Rev.B
NOTICE: Model: Linux

fix(stm32mp1): fdts: stm32mp1: align DDR regulators with new driver

With recent changes, TF-A now panics on MC-1, Avenger96 and Odyssey:

NOTICE: CPU: STM32MP157C?? Rev.B
NOTICE: Model: Linux Automation MC-1 board
ERROR: regul ldo3: max value 750 is invalid
PANIC at PC : 0x2ffeebb7

as the driver takes great offense at the content of the device
tree. The parts in question were copy-pasted from ST DTs, but
those ST DTs were fixed by commit 67d95409baae
("refactor(stm32mp1-fdts): update regulator description").

Fix the breakage by transplanting the same changes into all
remaining STM32MP1 DTs.

Change was boot-tested on MC-1, but only build tested for the
other two.

Fixes: bba9fdee589f ("feat(stm32mp1): add regulator framework compilation")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Change-Id: I143d0091625f62c313b3b71449c9ad99583d01c8

show more ...

Merge changes I2c9aecc9,Ie6a019f4,Ief6f0a63,Iec9c80f2 into integration

* changes:
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
fdts: stm32mp1: add alternative SDMMC2 pins to t

Merge changes I2c9aecc9,Ie6a019f4,Ief6f0a63,Iec9c80f2 into integration

* changes:
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
fdts: stm32mp1: add alternative SDMMC2 pins to the pinctrl
fdts: stm32mp1: add I2C2 pins in the pinctrl
fdts: stm32mp1: add the I2C2 peripheral in the SoC DTS

show more ...

fdts: stm32mp1: add support for the Seeed Odyssey SoM and board

Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the
STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and

fdts: stm32mp1: add support for the Seeed Odyssey SoM and board

Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the
STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and a
cryptographic processor) the STPMIC1A PMIC, 512 MB of DDR3 RAM and a
4 GB eMMC. There are two LEDs as well, one hardwired to the PMIC’s VDD
output, and the other available at the MPU’s port PG3. The SoM can be
plugged into a carrier board using its three 70‑pin connectors.

Seeed Odyssey‐STM32MP157C is the reference carrier board for the SoM in
a Raspberry Pi‐like form factor. It features a WiFi/Bluetooth chip, a
microSD card port and various I/O interfaces.

The device tree is based on the DKx boards. TF‑A was successfully tested
on the board with Buildroot 2021.02 and U-Boot 2021.04.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Change-Id: I2c9aecc925561e8d338dddbb192d3bb23a533914

show more ...