Merge changes from topic "st_clk_update" into integration

* changes:
feat(st-clock): use early traces
fix(st-clock): adapt order of CSS on LSE and HSE
refactor(st-clock): remove unused struct

Merge changes from topic "st_clk_update" into integration

* changes:
feat(st-clock): use early traces
fix(st-clock): adapt order of CSS on LSE and HSE
refactor(st-clock): remove unused struct
feat(stm32mp1-fdts): remove RTC clock configuration
refactor(st-clock): move stm32mp1_clk_rcc_regs_*lock
refactor(st-clock): driver size optimization
refactor(st-clock): remove BL32 support on STM32MP13
feat(st-clock): don't gate/ungate an oscillator if it is not wired
feat(dt-bindings): add missing SPIx bus clocks
feat(stm32mp1-fdts): remove PLL1 settings
feat(st-clock): update with new bindings
feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1
feat(dt-bindings): new RCC DT bindings
feat(stm32mp1): always boot at 650MHz
refactor(st-clock): remove LSEDRV_MEDIUM_HIGH for STM32MP13
fix(st-clock): display proper PLL number for STM32MP13
fix(st-clock): do not reconfigure LSE
feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation
refactor(st-clock): remove unused clk function in API
refactor(st-clock): support deactivated STGEN in stm32mp_stgen_config
feat(st-clock): add function to restore generic timer rate

show more ...

feat(stm32mp1-fdts): remove PLL1 settings

TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.

Change-Id: I0003337d8d37d

feat(stm32mp1-fdts): remove PLL1 settings

TF-A BL2 always boot at 650MHz using an algorithm to calculate PLL1
settings, without reading DT. Remove the corresponding nodes.

Change-Id: I0003337d8d37df7b2a70a84b5475f4278c4c4669
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

show more ...

feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1

RCC bindings alignment with MP13 RCC bindings

Change-Id: I02c89accd51e4214cd009d4a9433d8d9b6aeba25
Signed-off-by: Gabriel Fernandez <gabriel.fe

feat(stm32mp1-fdts): new RCC DT bindings for STM32MP1

RCC bindings alignment with MP13 RCC bindings

Change-Id: I02c89accd51e4214cd009d4a9433d8d9b6aeba25
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>

show more ...

feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation

LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG

feat(stm32mp1-fdts): move RNG1 to CSI to improve random generation

LSI was too slow to provide enough random numbers (limited
to 6ms for 16 bytes production). Switch to CSI that allow
to get the RNG fifo ready in less than 50µs.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: I76d1fe58e2f4d5416a96f48123ae36bd82d8a8ee

show more ...

Merge changes from topic "stm32mp15-dt-updates" into integration

* changes:
refactor(stm32mp15-fdts): remove timers15 node
refactor(stm32mp15-fdts): remove unused secure-status properties
refa

Merge changes from topic "stm32mp15-dt-updates" into integration

* changes:
refactor(stm32mp15-fdts): remove timers15 node
refactor(stm32mp15-fdts): remove unused secure-status properties
refactor(stm32mp15-fdts): remove RCC secure-status

show more ...

refactor(stm32mp15-fdts): remove unused secure-status properties

For peripheral where both status and secure-status are set to okay,
the function fdt_get_status() returns the same status (DT_SHARED)

refactor(stm32mp15-fdts): remove unused secure-status properties

For peripheral where both status and secure-status are set to okay,
the function fdt_get_status() returns the same status (DT_SHARED) if
secure-status property is omitted. This secure-status property can then
be removed in boards DT files for iwdg nodes.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I9f9360842d4d41288db0cf1b92063f347c72d137

show more ...

refactor(stm32mp15-fdts): remove RCC secure-status

The RCC security is managed with a dedicated compatible:
"st,stm32mp1-rcc-secure" [1].
Remove useless secure-status property in boards rcc nodes.

refactor(stm32mp15-fdts): remove RCC secure-status

The RCC security is managed with a dedicated compatible:
"st,stm32mp1-rcc-secure" [1].
Remove useless secure-status property in boards rcc nodes.

[1] 812daf916c ("feat(st): update the security based on new compatible")

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iff31044ade78dd9c432120dce65375fe2b0d36d6

show more ...

Merge "fix(stm32mp1): fdts: stm32mp1: align DDR regulators with new driver" into integration

fix(stm32mp1): fdts: stm32mp1: align DDR regulators with new driver

With recent changes, TF-A now panics on MC-1, Avenger96 and Odyssey:

NOTICE: CPU: STM32MP157C?? Rev.B
NOTICE: Model: Linux

fix(stm32mp1): fdts: stm32mp1: align DDR regulators with new driver

With recent changes, TF-A now panics on MC-1, Avenger96 and Odyssey:

NOTICE: CPU: STM32MP157C?? Rev.B
NOTICE: Model: Linux Automation MC-1 board
ERROR: regul ldo3: max value 750 is invalid
PANIC at PC : 0x2ffeebb7

as the driver takes great offense at the content of the device
tree. The parts in question were copy-pasted from ST DTs, but
those ST DTs were fixed by commit 67d95409baae
("refactor(stm32mp1-fdts): update regulator description").

Fix the breakage by transplanting the same changes into all
remaining STM32MP1 DTs.

Change was boot-tested on MC-1, but only build tested for the
other two.

Fixes: bba9fdee589f ("feat(stm32mp1): add regulator framework compilation")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Change-Id: I143d0091625f62c313b3b71449c9ad99583d01c8

show more ...

Merge "fdts: stm32mp1: realign device tree with kernel" into integration

fdts: stm32mp1: realign device tree with kernel

There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU a

fdts: stm32mp1: realign device tree with kernel

There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A

The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.

There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.

STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.

Some reordering is done in other files, and realign with kernel DT files.

The DDR files are generated with our internal tool, no changes in the
registers values.

Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

Merge changes from topic "stm32mp_corrections_w40" into integration

* changes:
gpio: stm32_gpio: do not mix error code types
fdts: stm32mp1: move FDCAN to PLL4_R
mmc: increase delay between AC

Merge changes from topic "stm32mp_corrections_w40" into integration

* changes:
gpio: stm32_gpio: do not mix error code types
fdts: stm32mp1: move FDCAN to PLL4_R
mmc: increase delay between ACMD41 retries
crypto: stm32_hash: align stm32_hash_update() prototype

show more ...

fdts: stm32mp1: move FDCAN to PLL4_R

LTDC modifies the clock frequency to adapt it to the display. Such
frequency change is not detected by the FDCAN driver that instead
caches the value at probe an

fdts: stm32mp1: move FDCAN to PLL4_R

LTDC modifies the clock frequency to adapt it to the display. Such
frequency change is not detected by the FDCAN driver that instead
caches the value at probe and pretends to use it later.

This change fixes the issue by moving the FDCAN to PLL4_R,
leaving the LTDC alone on PLL4_Q.

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I8230868b2b5fd6deb6e3f9dc3911030d8d484c58

show more ...

Merge changes from topic "avenger96" into integration

* changes:
fdts: Fix DTC warnings for STM32MP1 platform
docs: plat: stm32mp1: Document the usage of DTB_FILE_NAME variable
stm32mp1: Add A

Merge changes from topic "avenger96" into integration

* changes:
fdts: Fix DTC warnings for STM32MP1 platform
docs: plat: stm32mp1: Document the usage of DTB_FILE_NAME variable
stm32mp1: Add Avenger96 board support

show more ...

stm32mp1: Add Avenger96 board support

Add board support for Avenger96 board from Arrow Electronics. This
board is based on STM32MP157A SoC and is one of the 96Boards Consumer
Edition platform.

More

stm32mp1: Add Avenger96 board support

Add board support for Avenger96 board from Arrow Electronics. This
board is based on STM32MP157A SoC and is one of the 96Boards Consumer
Edition platform.

More information about this board can be found in 96Boards website:
https://www.96boards.org/product/avenger96/

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Change-Id: Ic905f26c38d03883c6e4ea221b4b275a4b534857

show more ...