Merge "feat(fvp): fdts: add stdout-path to the Foundation FVPs" into integration

feat(fvp): fdts: add stdout-path to the Foundation FVPs

Add an `stdout-path' property into the `chosen' node of the Foundation
FVPs Devicetrees.

This gives a default console to the Linux kernel whe

feat(fvp): fdts: add stdout-path to the Foundation FVPs

Add an `stdout-path' property into the `chosen' node of the Foundation
FVPs Devicetrees.

This gives a default console to the Linux kernel when "console=" is not
specified on the kernel command line, which is useful when booting with
U-Boot in UEFI for example.

Change-Id: I27d5f7f9416bd42b7401b1a57ae64bfee2524204
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

show more ...

Merge changes from topic "mit-license" into integration

* changes:
fix(dt-bindings): fix static checks
docs(license): rectify `arm-gic.h` license

fix(dt-bindings): fix static checks

This patch fixes static checks errors reported for missing copyright in
`include/dt-bindings/interrupt-controller/arm-gic.h` and the include
order of header files

fix(dt-bindings): fix static checks

This patch fixes static checks errors reported for missing copyright in
`include/dt-bindings/interrupt-controller/arm-gic.h` and the include
order of header files in `.dts` and `.dtsi` files.

Change-Id: I2baaf2719fd2c84cbcc08a8f0c4440a17a9f24f6
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge "Plat FVP: Fix Generic Timer interrupt types" into integration

Plat FVP: Fix Generic Timer interrupt types

The Arm Generic Timer specification mandates that the
interrupt associated with each timer is low level triggered,
see:

Arm Cortex-A76 Core:
"Each timer

Plat FVP: Fix Generic Timer interrupt types

The Arm Generic Timer specification mandates that the
interrupt associated with each timer is low level triggered,
see:

Arm Cortex-A76 Core:
"Each timer provides an active-LOW interrupt output to the SoC."

Arm Cortex-A53 MPCore Processor:
"It generates timer events as active-LOW interrupt outputs and
event streams."

The following files in fdts\

fvp-base-gicv3-psci-common.dtsi
fvp-base-gicv3-psci-aarch32-common.dtsi
fvp-base-gicv2-psci-aarch32.dts
fvp-base-gicv2-psci.dts
fvp-foundation-gicv2-psci.dts
fvp-foundation-gicv3-psci.dts

describe interrupt types as edge rising
IRQ_TYPE_EDGE_RISING = 0x01:

interrupts = <1 13 0xff01>,
<1 14 0xff01>,
<1 11 0xff01>,
<1 10 0xff01>;

, see include\dt-bindings\interrupt-controller\arm-gic.h:

which causes Linux to generate the warnings below:
arch_timer: WARNING: Invalid trigger for IRQ5, assuming level low
arch_timer: WARNING: Please fix your firmware

This patch adds GIC_CPU_MASK_RAW macro definition to
include\dt-bindings\interrupt-controller\arm-gic.h,
modifies interrupt type to IRQ_TYPE_LEVEL_LOW and
makes use of type definitions in arm-gic.h.

Change-Id: Iafa2552a9db85a0559c73353f854e2e0066ab2b9
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge "FVP: Add support for passing platform's topology to DTS" into integration

FVP: Add support for passing platform's topology to DTS

This patch adds support for passing FVP platform's topology
configuration to DTS files for compilation, which allows to
build DTBs with correc

FVP: Add support for passing platform's topology to DTS

This patch adds support for passing FVP platform's topology
configuration to DTS files for compilation, which allows to
build DTBs with correct number of clusters and CPUs.
This removes non-existing clusters/CPUs from the compiled
device tree blob and fixes reported Linux errors when trying
to power on absent CPUs/PEs.
If DTS file is passed using FVP_HW_CONFIG_DTS build option from
the platform's makefile, FVP_CLUSTER_COUNT, FVP_MAX_CPUS_PER_CLUSTER
and FVP_MAX_PE_PER_CPU parameters are used, otherwise CI script will
use the default values from the corresponding DTS file.

Change-Id: Idcb45dc6ad5e3eaea18573aff1a01c9344404ab3
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fc

Merge changes from topic "mp/enhanced_pal_hw" into integration

* changes:
plat/arm/fvp: populate pwr domain descriptor dynamically
fconf: Extract topology node properties from HW_CONFIG dtb
fconf: necessary modifications to support fconf in BL31 & SP_MIN
fconf: enhancements to firmware configuration framework

show more ...

fconf: Extract topology node properties from HW_CONFIG dtb

Create, register( and implicitly invoke) fconf_populate_topology()
function which extracts the topology related properties from dtb into
th

fconf: Extract topology node properties from HW_CONFIG dtb

Create, register( and implicitly invoke) fconf_populate_topology()
function which extracts the topology related properties from dtb into
the newly created fconf based configuration structure 'soc_topology'.
Appropriate libfdt APIs are added to jmptbl.i file for use with USE_ROMLIB
build feature.

A new property which describes the power domain levels is added to the
HW_CONFIG device tree source files.

This patch also fixes a minor bug in the common device tree file
fvp-base-gicv3-psci-dynamiq-common.dtsi
As this file includes fvp-base-gicv3-psci-common.dtsi, it is necessary
to delete all previous cluster node definitons because DynamIQ based
models have upto 8 CPUs in each cluster. If not deleted, the final dts
would have an inaccurate description of SoC topology, i.e., cluster0
with 8 or more core nodes and cluster1 with 4 core nodes.

Change-Id: I9eb406da3ba4732008a66c01afec7c9fa8ef59bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge "Replace dts includes with C preprocessor syntax" into integration

Replace dts includes with C preprocessor syntax

Using the /include/ syntax, the include was evaluated by dtc, only after running
the preprocessor, therefore the .dtsi files were not preprocessed. Th

Replace dts includes with C preprocessor syntax

Using the /include/ syntax, the include was evaluated by dtc, only after running
the preprocessor, therefore the .dtsi files were not preprocessed. This patch
adds the #include syntax instead. Evaluating this and preprocessing the files
now happens in a single step, done by the C preprocessor.

Change-Id: I6d0104b6274316fc736e84973502a4d6c2c9d6e0
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>

show more ...

Merge pull request #972 from achingupta/ag/freebsd-dt-change

Device tree changes to boot FreeBSD on FVPs

Device tree changes to boot FreeBSD on FVPs

FreeBSD does not understand #interrupt-map in a device tree. This prevents the
GIC from being set up correctly. This patch removes the #interrupt-map in t

Device tree changes to boot FreeBSD on FVPs

FreeBSD does not understand #interrupt-map in a device tree. This prevents the
GIC from being set up correctly. This patch removes the #interrupt-map in the
device trees for the Base and Foundation FVPs. This enables correct boot of
FreeBSD on these platforms.

These changes have been tested with FreeBSD and an Ubuntu cloud image
(ubuntu-16.04-server-cloudimg-arm64-uefi1.img) to ensure compatibility with
Linux.

Change-Id: I1347acdcf994ec4b1dd843ba32af9951aa54db73
Signed-off-by: Achin Gupta <achin.gupta@arm.com>

show more ...

Merge pull request #726 from soby-mathew/sm/fix_dt

Fix GICv3 DT to include psci system off/reset

Fix GICv3 DT to include psci system off/reset

The `fvp-base-gicv3-psci` and `fvp-foundation-gicv3-psci` device tree source
files did not have psci node entries for `system off` and `system reset`.
A

Fix GICv3 DT to include psci system off/reset

The `fvp-base-gicv3-psci` and `fvp-foundation-gicv3-psci` device tree source
files did not have psci node entries for `system off` and `system reset`.
Also the DTS files included `rtsm_ve-motherboard-no_psci.dtsi` instead of
`rtsm_ve-motherboard.dtsi`. As a result, the Linux kernel failed to invoke
the PSCI_SYSTEM_OFF/RESET API when being shutdown/reset. This patch corrects
this problem and also updates the corresponding DTB files.

This patch also removes `rtsm_ve-motherboard-no_psci.dtsi` and
`fvp-foundation-motherboard-no_psci.dtsi` files as they are no longer used.

Change-Id: I8ba61a1323035f7508cae663bb490ac0e8a64618

show more ...

Merge pull request #552 from antonio-nino-diaz-arm/an/cache-dts

Add cache topology info to FVP DTBs

Add cache topology info to FVP DTBs

From version 4.0 onwards, the ARM64 Linux kernel expects the device
tree to indicate the cache hierarchy. Failing to provide this
information results in the follo

Add cache topology info to FVP DTBs

From version 4.0 onwards, the ARM64 Linux kernel expects the device
tree to indicate the cache hierarchy. Failing to provide this
information results in the following warning message to be printed by
the kernel:

`Unable to detect cache hierarchy from DT for CPU x`

All the FVP device trees provided in the TF source tree have been
modified to add this information.

Fixes ARM-software/tf-issues#325

Change-Id: I0ff888992e602b81a0fe1744a86151d625727511

show more ...

Merge pull request #297 from sandrine-bailleux/sb/move-up-deps

Move up dependency versions

FVP: update device tree idle state entries

Device tree idle state bindings changed in kernel v3.18. This patch
updates the FVP DT files to use PSCI suspend as idle state.

The patch also updates the

FVP: update device tree idle state entries

Device tree idle state bindings changed in kernel v3.18. This patch
updates the FVP DT files to use PSCI suspend as idle state.

The patch also updates the 'compatible' property in the PSCI node
and the 'entry-method' property in the idle-states node in the FVP
Foundation GICv2-legacy device tree.

Change-Id: Ie921d497c579f425c03d482f9d7b90e166106e2f

show more ...

Merge pull request #245 from danh-arm/sm/psci_version

Increment the PSCI VERSION to 1.0 (PR v2)

Increment the PSCI VERSION to 1.0

This patch:

* Bumps the PSCI VERSION to 1.0. This means that
the PSCI_VERSION API will now return the value 0x00010000
to indicate the version as 1.0.

Increment the PSCI VERSION to 1.0

This patch:

* Bumps the PSCI VERSION to 1.0. This means that
the PSCI_VERSION API will now return the value 0x00010000
to indicate the version as 1.0. The firmware remains
compatible with PSCI v0.2 clients.

* The firmware design guide is updated to document the
APIs supported by the Trusted Firmware generic code.

* The FVP Device Tree Sources (dts) and Blobs(dtb) are also
updated to add "psci-1.0" and "psci-0.2" to the list of
compatible PSCI versions.

Change-Id: Iafc2f549c92651dcd65d7e24a8aae35790d00f8a

show more ...

Merge pull request #195 from achingupta/ag/fvp_dt_updates

FVP: Update device trees to match cpuidle driver

FVP: Update device trees to match cpuidle driver

This patch updates the representation of idle tables and cpu/cluster topology in
the device tree source files for the FVP to what the latest cpuidle

FVP: Update device trees to match cpuidle driver

This patch updates the representation of idle tables and cpu/cluster topology in
the device tree source files for the FVP to what the latest cpuidle driver in
Linux expects. The device tree binaries have also been updated.

Change-Id: If0668b96234f65aa0435fba52f288c9378bd8824

show more ...

Merge pull request #191 from danh-arm/jc/tf-issues/218

Add support for PSCI SYSTEM_OFF and SYSTEM_RESET APIs v2