| ae6542f6 | 22-May-2019 |
Nicolas Le Bayon <nicolas.le.bayon@st.com> |
feat(st-bsec): add driver for the new IP version BSEC3
This driver is used for the new version of the BSEC peripheral used
on STM32MP25.
Change-Id: I38ca0db22d06704769c994c6806ccd80b17dde6e
Signed-
feat(st-bsec): add driver for the new IP version BSEC3
This driver is used for the new version of the BSEC peripheral used
on STM32MP25.
Change-Id: I38ca0db22d06704769c994c6806ccd80b17dde6e
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
show more ...
|
| a773f412 | 15-Nov-2023 |
Girisha Dengi <girisha.dengi@intel.com> |
fix(intel): update nand driver to match GHRD design
Update nand driver to match GHRD design, fix row
address calculation method and other misc updates.
Signed-off-by: Girisha Dengi <girisha.dengi@i
fix(intel): update nand driver to match GHRD design
Update nand driver to match GHRD design, fix row
address calculation method and other misc updates.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I1cb3dda43e767ba243fbe89bfa18818db321c5c2
show more ...
|
| 586701ce | 02-Oct-2019 |
Yann Gautier <yann.gautier@st.com> |
refactor(st-i2c): use fdt_read_uint32_default()
The function stm32_i2c_get_setup_from_fdt() was using fdt_getprop() to
to get some i2c node properties, and set a default value if the node
was not fo
refactor(st-i2c): use fdt_read_uint32_default()
The function stm32_i2c_get_setup_from_fdt() was using fdt_getprop() to
to get some i2c node properties, and set a default value if the node
was not found. The function fdt_read_uint32_default() already does
this in a simpler way.
Remove useless STM32_I2C_SPEED_DEFAULT.
Change-Id: I74c6295bb5765ee7c7e0a9ae020b741f1fe022a6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
show more ...
|
| 9cd784db | 01-Feb-2023 |
Yann Gautier <yann.gautier@foss.st.com> |
refactor(st): update test for closed chip
The function stm32mp_is_closed_device() is replaced with
stm32mp_check_closed_device(), which return an uint32_t, either
STM32MP_CHIP_SEC_OPEN or STM32MP_CH
refactor(st): update test for closed chip
The function stm32mp_is_closed_device() is replaced with
stm32mp_check_closed_device(), which return an uint32_t, either
STM32MP_CHIP_SEC_OPEN or STM32MP_CHIP_SEC_CLOSED.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ie0790cdc36c4b6522083bc1f0e7c38e8061e6adf
show more ...
|
| c7061045 | 14-Dec-2022 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
refactor(st-bsec): improve BSEC driver
In order to ease the introduction of a new BSEC3 driver for STM32MP25,
the BSEC2 driver is reworked. Unused functions are removed. The
bsec_base global variabl
refactor(st-bsec): improve BSEC driver
In order to ease the introduction of a new BSEC3 driver for STM32MP25,
the BSEC2 driver is reworked. Unused functions are removed. The
bsec_base global variable is removed in favor of the macro BSEC_BASE.
A rework is also done around function checking the state of BSEC.
Change-Id: I1ad76cb67333ab9a8fa1d65db34d74a712bf1190
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
show more ...
|
| 4f7e0fa3 | 01-Dec-2021 |
Takuya Sakata <takuya.sakata.wz@bp.renesas.com> |
fix(rcar3): fix load address range check
Fixed the check of the address range which the program is loaded to.
Use the addresses and sizes in the BL31 and BL32 certificates to check
that they are wit
fix(rcar3): fix load address range check
Fixed the check of the address range which the program is loaded to.
Use the addresses and sizes in the BL31 and BL32 certificates to check
that they are within the range of the target address and size
defined inside the TF-A.
It also uses the addresses and sizes in the BL33x certificates to check
that they are outside the protected area defined inside the TF-A.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Code clean up
Change-Id: Iade15431fc86587489fb0ca9106f6baaf7e926e2
show more ...
|
| ae4860b0 | 16-Mar-2023 |
Tobias Rist <tobias.rist@joynext.com> |
fix(rcar3-drivers): check loaded NS image area
Check if next NS image invades a previous loaded image.
Correct non secure image area to avoid loading a NS image to secure
Move GZ compressed payload
fix(rcar3-drivers): check loaded NS image area
Check if next NS image invades a previous loaded image.
Correct non secure image area to avoid loading a NS image to secure
Move GZ compressed payload at 32 * compressed payload size offset,
so it is loaded in non-secure area and can be decompressed into
non-secure area too. It is unlikely that the up to 2 MiB compressed
BL33 blob would decompress to payload larger than 64 MiB .
Signed-off-by: Tobias Rist <tobias.rist@joynext.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Fix for compressed BL33
Change-Id: I52fd556aab50687e4791e5dbc45d425f802c8757
show more ...
|
| b469880e | 03-Jul-2023 |
Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> |
fix(rcar3-drivers): check "rcar_image_number" variable before use
Validate the content of rcar_image_number variable before use.
Reviewed-by: Tomer Fichman <Tomer.Fichman@cymotive.com>
Signed-off-b
fix(rcar3-drivers): check "rcar_image_number" variable before use
Validate the content of rcar_image_number variable before use.
Reviewed-by: Tomer Fichman <Tomer.Fichman@cymotive.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Ieeabafa8f709d25eebc4a8e490bf623ef32ccf9f
show more ...
|
| 9778b270 | 07-Mar-2023 |
Tobias Rist <tobias.rist@joynext.com> |
fix(rcar3-drivers): check for length underflow
Make sure the length of the payload is not longer than the
DRAM size in check_load_area(), and make sure the payload
end does not cross protected area
fix(rcar3-drivers): check for length underflow
Make sure the length of the payload is not longer than the
DRAM size in check_load_area(), and make sure the payload
end does not cross protected area start.
Signed-off-by: Tobias Rist <tobias.rist@joynext.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I4d687be577a138352be9f92e5b0b6f596ffffba9
show more ...
|
| ef38fb1f | 23-Apr-2023 |
Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> |
fix(rcar3-drivers): add integer overflow check
Check against overflows while calculating the "len" variable.
Reviewed-by: Tomer Fichman <Tomer.Fichman@cymotive.com>
Signed-off-by: Yoshifumi Hosoya
fix(rcar3-drivers): add integer overflow check
Check against overflows while calculating the "len" variable.
Reviewed-by: Tomer Fichman <Tomer.Fichman@cymotive.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I0c50152a04365c6f52e0db3096e27e8a800c59ea
show more ...
|
| 93b8952e | 07-Mar-2023 |
Tobias Rist <tobias.rist@joynext.com> |
fix(rcar3-drivers): add integer overflow check
Add in the cert length calc function an integer overflow check
Signed-off-by: Tobias Rist <tobias.rist@joynext.com>
Signed-off-by: Yoshifumi Hosoya <y
fix(rcar3-drivers): add integer overflow check
Add in the cert length calc function an integer overflow check
Signed-off-by: Tobias Rist <tobias.rist@joynext.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I80e93582cd2d6006186e1573406b4945943b9422
show more ...
|
| 5e52433d | 13-Nov-2023 |
Manish V Badarkhe <manish.badarkhe@arm.com> |
Merge "build(mbedtls): add deprecation notice" into integration |
| 575c1469 | 09-Nov-2023 |
Sandrine Bailleux <sandrine.bailleux@arm.com> |
refactor(auth): remove return_if_error() macro
The usage of this macro hinders the accuracy of code coverage
data. Lines of code calling this macro always appear as covered because
the test conditio
refactor(auth): remove return_if_error() macro
The usage of this macro hinders the accuracy of code coverage
data. Lines of code calling this macro always appear as covered because
the test condition within it always gets executed; however, the branch
is not necessarily taken. Consequently, we lose branch coverage
information on these error code paths.
Besides, it is debatable whether such a simple macro really improves
code readability or on the contrary obfuscates the code...
For these reasons, this patch inlines the macro code everywhere it was
called.
It also adds some error messages in all these places to help narrowing
down authentication failures. These messages only get displayed and
compiled into the binaries when building TF-A with 'LOG_VERBOSE' level
of verbosity. We use the same message string everywhere in order to
limit the memory footprint increase for 'LOG_VERBOSE' builds.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: I461078bb8c6fd6811d2cbefbe3614e17e83796f2
show more ...
|
| 267c106f | 10-Nov-2023 |
Govindraj Raja <govindraj.raja@arm.com> |
build(mbedtls): add deprecation notice
Add a deprecation notice for building TF-A with mbedtls-2.x
This was notified earlier in TF-A mailing list:
https://lists.trustedfirmware.org/archives/list/tf
build(mbedtls): add deprecation notice
Add a deprecation notice for building TF-A with mbedtls-2.x
This was notified earlier in TF-A mailing list:
https://lists.trustedfirmware.org/archives/list/tf-a@lists.trustedfirmware.org/message/YDPOPASMGEQBCOI5TKUSD3V3J75NAT7A/
We will be removing support to build TF-A with mbedtls-2.x after
TF-A 2.10 release.
Change-Id: I669b423ee9af9f5c5255fce370413fffaf38e8eb
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
show more ...
|
| b65dfe40 | 26-Oct-2023 |
Sandrine Bailleux <sandrine.bailleux@arm.com> |
chore(auth)!: remove CryptoCell-712/713 support
CryptoCell-712 and CryptoCell-713 drivers have been deprecated since
TF-A v2.9 and their removal was announced for TF-A v2.10 release.
See [1].
As th
chore(auth)!: remove CryptoCell-712/713 support
CryptoCell-712 and CryptoCell-713 drivers have been deprecated since
TF-A v2.9 and their removal was announced for TF-A v2.10 release.
See [1].
As the release is approaching, this patch deletes these drivers' code as
well as all references to them in the documentation and Arm platforms
code (Nuvoton platform is taken care in a subsequent patch). Associated
build options (ARM_CRYPTOCELL_INTEG and PLAT_CRYPTOCELL_BASE) have also
been removed and thus will have no effect if defined.
This is a breaking change for downstream platforms which use these
drivers.
[1] https://trustedfirmware-a.readthedocs.io/en/v2.9/about/release-information.html#removal-of-deprecated-drivers
Note that TF-A v3.0 release later got renumbered into v2.10.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Change-Id: Idabbc9115f6732ac1a0e52b273d3380677a39813
show more ...
|
| 48b92c60 | 30-Oct-2023 |
Lauren Wehrmeister <lauren.wehrmeister@arm.com> |
Merge changes from topic "mb/psa-crypto-ecdsa" into integration
* changes:
docs: mark PSA_CRYPTO as an experimental feature
feat(fvp): increase BL1 RW area for PSA_CRYPTO implementation
feat(m
Merge changes from topic "mb/psa-crypto-ecdsa" into integration
* changes:
docs: mark PSA_CRYPTO as an experimental feature
feat(fvp): increase BL1 RW area for PSA_CRYPTO implementation
feat(mbedtls-psa): mbedTLS PSA Crypto with ECDSA
show more ...
|
| f08460dc | 12-Oct-2023 |
Govindraj Raja <govindraj.raja@arm.com> |
feat(partition): add interface to init gpt
Current interface 'partition_init' accepts parameter image_id
and returns no value. But the entire partition driver is build
only to parse and handle GPT p
feat(partition): add interface to init gpt
Current interface 'partition_init' accepts parameter image_id
and returns no value. But the entire partition driver is build
only to parse and handle GPT partitions, so add new interface
gpt_partition_init which would return failure to platform code
if it fails to parse the image.
Change-Id: Iaf574d2ad01a15d0723c1475290c31dc4a078835
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
show more ...
|
| 0f23e7eb | 12-Oct-2023 |
Govindraj Raja <govindraj.raja@arm.com> |
refactor(partition): convert warn to verbose
Convert all warn messages to verbose messages. As most warning are
needed during debug only and and won't increase the binary size by
default.
Change-Id
refactor(partition): convert warn to verbose
Convert all warn messages to verbose messages. As most warning are
needed during debug only and and won't increase the binary size by
default.
Change-Id: Icc5d5157f13507ccbc34675c20357117cad98255
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
show more ...
|
| ad2dd658 | 03-Oct-2023 |
Govindraj Raja <govindraj.raja@arm.com> |
feat(partition): add support to use backup GPT header
Currently we just use primary GPT header which is located in second
entry after MBR header, but if this block is corrupted or CRC
mismatch occur
feat(partition): add support to use backup GPT header
Currently we just use primary GPT header which is located in second
entry after MBR header, but if this block is corrupted or CRC
mismatch occurs we could try to use the backup GPT header located at
LBAn and GPT entries following this from LBA-33.
Add suitable warning messages before returning any errors to identify
the cause of issue.
Change-Id: I0018ae9eafbacb683a18784d2c8bd917c70f50e1
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
show more ...
|
| fce8a70e | 21-Sep-2023 |
Govindraj Raja <govindraj.raja@arm.com> |
refactor(partition): get GPT header location from MBR
GPT header is located in first LBA after MBR entry and mbr header has
details of beginning of first entry, so use mbr header entry first_lba
dat
refactor(partition): get GPT header location from MBR
GPT header is located in first LBA after MBR entry and mbr header has
details of beginning of first entry, so use mbr header entry first_lba
data to locate GPT header rather than GPT_HEADER_OFFSET.
GPT header size is available in gpt_header, so use that
rather than using DEFAULT_GPT_HEADER_SIZE.
The location of GPT entries is available once we parse gpt_header
and is available as partitiona_lba use that to load gpt_entries rather
than GPT_ENTRY_OFFSET.
Change-Id: I3c11f8cc9d4b0b1778a37fe342fb845ea4a4eff1
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
show more ...
|
| 255ce97d | 27-Sep-2023 |
Manish V Badarkhe <Manish.Badarkhe@arm.com> |
feat(mbedtls-psa): mbedTLS PSA Crypto with ECDSA
The ECDSA algorithm signature verification in the PSA differs
from the RSA algorithm in its handling of data formats. In the
case of RSA, an encoded
feat(mbedtls-psa): mbedTLS PSA Crypto with ECDSA
The ECDSA algorithm signature verification in the PSA differs
from the RSA algorithm in its handling of data formats. In the
case of RSA, an encoded ASN1.0 buffer is passed to the PSA API,
which then decodes the buffer. However, for ECDSA, the PSA API
expects a raw format.
To accomodate this requirement, introduce several static APIs
that allows to retrieve -
1. ECDSA public key data pointer along with its size, and also,
the ECC family in PSA format from the public key.
2. R and S pair of the ECDSA signature along with its size
Change-Id: Icc7d5659aeb3d5c1ab63c3a12c001e68b11a3a86
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
show more ...
|
| d6b458e8 | 24-Oct-2023 |
Sandrine Bailleux <sandrine.bailleux@arm.com> |
Merge changes Ia66dd232,Ie0ddbe0b,Idd191614 into integration
* changes:
fix(rcar3-drivers): update DDR setting
fix(rcar3): fix CPG register code comment
fix(rcar3): update Draak and Eagle boar
Merge changes Ia66dd232,Ie0ddbe0b,Idd191614 into integration
* changes:
fix(rcar3-drivers): update DDR setting
fix(rcar3): fix CPG register code comment
fix(rcar3): update Draak and Eagle board IDs
show more ...
|
| 159ebbfe | 17-Oct-2023 |
Joanna Farley <joanna.farley@arm.com> |
Merge changes from topic "dcc-console" into integration
* changes:
fix(dcc): enable DCC also for crash console
build(changelog): add new scope for DCC |
| 138ddcbf | 22-Jul-2022 |
Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> |
fix(rcar3-drivers): update DDR setting
Update R-Car H3/M3/M3N DDR setting rev.0.42.
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Ia66dd2329ab3a3ca39132a737e92b3a4864
fix(rcar3-drivers): update DDR setting
Update R-Car H3/M3/M3N DDR setting rev.0.42.
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Ia66dd2329ab3a3ca39132a737e92b3a4864db02d
show more ...
|
| 281edfee | 22-Jan-2023 |
Marek Vasut <marek.vasut+renesas@gmail.com> |
fix(rcar3): update Draak and Eagle board IDs
The Draak board ID is 7, Eagle is 3, update them to match
HW documentation. Drop the U suffix from Ebisu board ID.
Signed-off-by: Marek Vasut <marek.vas
fix(rcar3): update Draak and Eagle board IDs
The Draak board ID is 7, Eagle is 3, update them to match
HW documentation. Drop the U suffix from Ebisu board ID.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Idd191614a6f1f8dbbc13b8e0bc1f089090f9d20b
show more ...
|