fix(nand): reset the SLC NAND

The reset command should be the first command sent to the SLC NAND.
Resetting the SLC NAND should not be done only if NAND_ONFI_DETECT
is enabled.

Change-Id: If225a1b1

fix(nand): reset the SLC NAND

The reset command should be the first command sent to the SLC NAND.
Resetting the SLC NAND should not be done only if NAND_ONFI_DETECT
is enabled.

Change-Id: If225a1b1a7e04181cc5839e282c435c5c8958bd7
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>

show more ...

fix(spi-nand): add Quad Enable management

The framework currently supports QE feature only for Macronix devices.
Kioxia devices also support this feature, but this feature can not be
set based on th

fix(spi-nand): add Quad Enable management

The framework currently supports QE feature only for Macronix devices.
Kioxia devices also support this feature, but this feature can not be
set based on the manufacturer ID as Kioxia first SPI NAND generation
does not support the QE feature when the second generation does.

Use a flag to manage QE feature. This flag will be added at board level
to manage the device.

Change-Id: I7a3683a2df8739967b17b4abbec32c51bf206b93
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>

show more ...

feat(mtd): add platform function to allow using external buffer

The scratch buffer could be large. The new function allows
platform to defined its own external buffer or use the default
one.

Signed

feat(mtd): add platform function to allow using external buffer

The scratch buffer could be large. The new function allows
platform to defined its own external buffer or use the default
one.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ib7ab8ff19fa0a9cb06e364f058b91af58c3c471a

show more ...

fix(mtd): correct types in messages

Some messages don't use the correct types, update them.
This avoids warning when -Wformat-signedness is enabled.

Change-Id: Ie5384a7d139c48a623e1617c93d15fecc8a3

fix(mtd): correct types in messages

Some messages don't use the correct types, update them.
This avoids warning when -Wformat-signedness is enabled.

Change-Id: Ie5384a7d139c48a623e1617c93d15fecc8a36061
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

feat(common): add SZ_* macros

Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.

Change-Id: I3c4d4959b0f43e785eeb37a43d

feat(common): add SZ_* macros

Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.

Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>

show more ...

fix(spi_nand): check correct manufacturer id

On most of SPI NAND, the read id command needs a dummy byte,
except GIGADEVICE SPI NAND that needs an address.
To be compliant with all memories provider

fix(spi_nand): check correct manufacturer id

On most of SPI NAND, the read id command needs a dummy byte,
except GIGADEVICE SPI NAND that needs an address.
To be compliant with all memories providers, the first byte returns
by the READ_ID command is not relevant (garbage).

Change-Id: Ife74ccab333dd1a04799abe230d3f07fa6ea1edb
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

fix(spi_nand): check that parameters have been set

This patch checks that the SPI NAND parameters needed by
the framework have been set before starting to read data.

Change-Id: I17b36606701c44864dc

fix(spi_nand): check that parameters have been set

This patch checks that the SPI NAND parameters needed by
the framework have been set before starting to read data.

Change-Id: I17b36606701c44864dcf1783f810da5c8cbf88f2
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...