Merge "feat(cpufeat): enable USE_SPINLOCK_CAS to FEAT_STATE_CHECKED" into integration

feat(cpufeat): enable USE_SPINLOCK_CAS to FEAT_STATE_CHECKED

The FEAT_LSE enablement predates the FEAT_STATE framework and has never
been converted. Since the introduction of USE_SPINLOCK_CAS we've

feat(cpufeat): enable USE_SPINLOCK_CAS to FEAT_STATE_CHECKED

The FEAT_LSE enablement predates the FEAT_STATE framework and has never
been converted. Since the introduction of USE_SPINLOCK_CAS we've gained
lots of quality of life features that allow for better feature
enablement. This patch converts USE_SPINLOCK_CAS to tri-state and adds
it to FEATURE_DETECTION to align with all other features.

Instead of introducing the assembly checking for tri-state, this patch
translates all locking routines to C inline assembly and uses the
standard C helpers. The main benefit is that this gives greater
visibility to the compiler about what the functions are doing and lets
it optimise better. Namely, it is able to allocate registers itself and
inline the functions when LTO is enabled.

An unsuccessful attempt was made to use the instructions directly and
have even flow control in C. This, however, made code very complicated
and less efficient in the tight loops of the spinlock.

The last use of ARM_ARCH_AT_LEAST goes away with this change and so this
macro is removed. It has now been fully superseded by the FEAT_STATE
framework.

This change exposes a limitation - RME_GPT_BITLOCK_BLOCK requires
USE_SPINLOCK_CAS. This patch does not address this in any way but makes
the relationship explicit.

Change-Id: I580081549aceded2dca3e0f4564ee7510a7e56ae
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge changes from topic "comp_build_macro" into integration

* changes:
feat(build): setting CRYPTO_LIB via CRYPTO_SUPPORT
feat(build): set CRYPTO_SUPPORT macro per BL
feat(build): create defi

Merge changes from topic "comp_build_macro" into integration

* changes:
feat(build): setting CRYPTO_LIB via CRYPTO_SUPPORT
feat(build): set CRYPTO_SUPPORT macro per BL
feat(build): create define macro to be used by BL

show more ...

feat(build): setting CRYPTO_LIB via CRYPTO_SUPPORT

Setting CRYPTO_LIB based on CRYPTO_SUPPORT via the
CRYPTO_SUPPORT macro to be called by component-specific makefiles.

Signed-off-by: Lauren Wehrme

feat(build): setting CRYPTO_LIB via CRYPTO_SUPPORT

Setting CRYPTO_LIB based on CRYPTO_SUPPORT via the
CRYPTO_SUPPORT macro to be called by component-specific makefiles.

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ib400e4668c60c24bb4399de6a320b5c16205affb

show more ...

feat(build): set CRYPTO_SUPPORT macro per BL

Moving the setting of CRYPTO_SUPPORT from the main Makefile to
individual component makefiles using the new build macro
make_defines for each BL-specific

feat(build): set CRYPTO_SUPPORT macro per BL

Moving the setting of CRYPTO_SUPPORT from the main Makefile to
individual component makefiles using the new build macro
make_defines for each BL-specific CPPFLAGS.

Rework romlib build command to use CRYPTO_LIB to determine mbedtls need
instead of CRYPTO_SUPPORT. If CRYPTO_SUPPORT is set for any component,
then CRYPTO_LIB will be filled, romlib can use this instead.

Add a convenience makefile macro for setting CRYPTO_SUPPORT from
component specific makefiles, have components call the macro based on
whether authenication verification (NEED_AUTH) and/or hash calculation
(NEED_HASH) is required for the specific boot stage.

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I7e81fede74fb9c04694b022e8eebed460616565c

show more ...

Merge changes Id711e387,I531a2ee1,Ic5b48514,I81f5f663,I6c529c13, ... into integration

* changes:
refactor(romlib): absorb WRAPPER_FLAGS into LDFLAGS
fix(build): simplify the -target options
fe

Merge changes Id711e387,I531a2ee1,Ic5b48514,I81f5f663,I6c529c13, ... into integration

* changes:
refactor(romlib): absorb WRAPPER_FLAGS into LDFLAGS
fix(build): simplify the -target options
feat(build): allow full LTO builds with clang
refactor(build): make sorting of sections generic
feat(build): use clang as a linker
fix(build): correctly detect that an option is missing with ld_option
feat(build): pass cflags to the linker when LTO is enabled

show more ...

refactor(build): make sorting of sections generic

All BLs define essentially the same sequence for sorting of sections.
Make that generic so it applies more easily.

Change-Id: I81f5f6635232bd43d999

refactor(build): make sorting of sections generic

All BLs define essentially the same sequence for sorting of sections.
Make that generic so it applies more easily.

Change-Id: I81f5f6635232bd43d999c8054e290a6437c26c71
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge "feat(cm): test integrity of el1_ctx registers" into integration

feat(cm): test integrity of el1_ctx registers

* This patch adds support to tsp (BL32) Image, to exercise
EL1_context registers at S-EL1.

* Adds a SMC function ID "MODIFY_EL1_CTX" to handle EL1_CT

feat(cm): test integrity of el1_ctx registers

* This patch adds support to tsp (BL32) Image, to exercise
EL1_context registers at S-EL1.

* Adds a SMC function ID "MODIFY_EL1_CTX" to handle EL1_CTX
registers at S-EL1 and overwrite them.

Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Id4f2b3b748f7bc9e6c9d72a2f03d50aefbfb61cb

show more ...

Merge "build: use toolchain identifiers in conditions" into integration

Merge "build: use new toolchain variables for tools" into integration

build: use toolchain identifiers in conditions

The toolchain refactor change introduces the `${toolchain}-${tool}-id`
variables, which provide identifiers for all of the toolchain tools used
by the

build: use toolchain identifiers in conditions

The toolchain refactor change introduces the `${toolchain}-${tool}-id`
variables, which provide identifiers for all of the toolchain tools used
by the build system. This change replaces the various conditions that
are in use to identify these tools based on the path with a standard set
of comparisons against these new identifier variables.

Change-Id: Ib60e592359fa6e415c19a012e68d660f87436ca7
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

build: use new toolchain variables for tools

This change migrates the values of `CC`, `CPP`, `AS` and other toolchain
variables to the new `$(toolchain)-$(tool)` variables, which were
introduced by

build: use new toolchain variables for tools

This change migrates the values of `CC`, `CPP`, `AS` and other toolchain
variables to the new `$(toolchain)-$(tool)` variables, which were
introduced by the toolchain refactor patch. These variables should be
equivalent to the values that they're replacing.

Change-Id: I644fe4ce82ef1894bed129ddb4b6ab94fb04985d
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge changes from topic "align-sections" into integration

* changes:
build(trp): sort sections by alignment by default
build(tsp): sort sections by alignment by default
build(sp-min): sort se

Merge changes from topic "align-sections" into integration

* changes:
build(trp): sort sections by alignment by default
build(tsp): sort sections by alignment by default
build(sp-min): sort sections by alignment by default
build(bl31): sort sections by alignment by default
build(bl2u): sort sections by alignment by default
build(bl2): sort sections by alignment by default

show more ...

build(tsp): sort sections by alignment by default

This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly

build(tsp): sort sections by alignment by default

This change forces LD to sort all input sections by alignment when
allocating them within an output section. This is done in some places
explicitly in the linker scripts today, but this makes sure we don't
miss any easy targets.

Change-Id: Id702a2a572f2b43c77d53634ddc64b0220d2560b
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge changes from topic "mixed-rwx" into integration

* changes:
build: permit multiple linker scripts
build: clarify linker script generation
style: normalize linker script code style
fix(p

Merge changes from topic "mixed-rwx" into integration

* changes:
build: permit multiple linker scripts
build: clarify linker script generation
style: normalize linker script code style
fix(pie): pass `-fpie` to the preprocessor as well

show more ...

build: clarify linker script generation

The following build system variables have been renamed:

- `LINKERFILE` -> `DEFAULT_LINKER_SCRIPT`
- `BL_LINKERFILE` -> `DEFAULT_LINKER_SCRIPT_SOURCE`
- `<IMA

build: clarify linker script generation

The following build system variables have been renamed:

- `LINKERFILE` -> `DEFAULT_LINKER_SCRIPT`
- `BL_LINKERFILE` -> `DEFAULT_LINKER_SCRIPT_SOURCE`
- `<IMAGE>_LINKERFILE` -> `<IMAGE>_DEFAULT_LINKER_SCRIPT_SOURCE`

These new names better reflect how each variable is used:

1. the default linker script is passed via `-dT` instead of `-T`
2. linker script source files are first preprocessed

Additionally, linker scripts are now placed in the build directory
relative to where they exist in the source directory. For example,
the `bl32/sp_min/sp_min.ld.S` would now preprocess to
`sp_min/sp_min.ld` instead of just `bl32.ld`

BREAKING-CHANGE: The `LINKERFILE`, `BL_LINKERFILE` and
`<IMAGE_LINKERFILE>` build system variables have been renamed. See the
commit message for more information.

Change-Id: If8cef65dcb8820e8993736702c8741e97a66e6cc
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge changes from topic "ffa_el3_spmc" into integration

* changes:
feat(tsp): enable test cases for EL3 SPMC
feat(tsp): increase stack size for tsp
feat(tsp): add ffa_helpers to enable more F

Merge changes from topic "ffa_el3_spmc" into integration

* changes:
feat(tsp): enable test cases for EL3 SPMC
feat(tsp): increase stack size for tsp
feat(tsp): add ffa_helpers to enable more FF-A functionality

show more ...

feat(tsp): add ffa_helpers to enable more FF-A functionality

Include ffa_helpers originally taken from the TF-A Tests repo
to provide support for additional FF-A functionality.

Change-Id: Iacc3ee27

feat(tsp): add ffa_helpers to enable more FF-A functionality

Include ffa_helpers originally taken from the TF-A Tests repo
to provide support for additional FF-A functionality.

Change-Id: Iacc3ee270d5e3903f86f8078ed915d1e791c1298
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>

show more ...

Merge changes from topic "ffa_el3_spmc" into integration

* changes:
feat(tsp): add FF-A support to the TSP
feat(fvp/tsp_manifest): add example manifest for TSP
fix(spmc): fix relinquish valida

Merge changes from topic "ffa_el3_spmc" into integration

* changes:
feat(tsp): add FF-A support to the TSP
feat(fvp/tsp_manifest): add example manifest for TSP
fix(spmc): fix relinquish validation check

show more ...

feat(tsp): add FF-A support to the TSP

This patch adds the FF-A programming model in the test
secure payload to ensure that it can be used to test
the following spec features.

1. SP initialisation

feat(tsp): add FF-A support to the TSP

This patch adds the FF-A programming model in the test
secure payload to ensure that it can be used to test
the following spec features.

1. SP initialisation on the primary and secondary cpus.
2. An event loop to receive direct requests and respond
with direct responses.
3. Ability to receive messages that indicate power on
and off of a cpu.
4. Ability to handle a secure interrupt.

Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Shruti <shruti.gupta@arm.com>
Change-Id: I81cf744904d5cdc0b27862b5e4bc6f2cfe58a13a

show more ...

Merge "Add support for Branch Target Identification" into integration

Add support for Branch Target Identification

This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by add

Add support for Branch Target Identification

This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.

Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge pull request #1829 from antonio-nino-diaz-arm/an/pauth

Add Pointer Authentication (ARMv8.3-PAuth) support to the TF

TSP: Enable pointer authentication support

The size increase after enabling options related to ARMv8.3-PAuth is:

+----------------------------+-------+-------+-------+--------+
|

TSP: Enable pointer authentication support

The size increase after enabling options related to ARMv8.3-PAuth is:

+----------------------------+-------+-------+-------+--------+
| | text | bss | data | rodata |
+----------------------------+-------+-------+-------+--------+
| CTX_INCLUDE_PAUTH_REGS = 1 | +40 | +0 | +0 | +0 |
| | 0.4% | | | |
+----------------------------+-------+-------+-------+--------+
| ENABLE_PAUTH = 1 | +352 | +0 | +16 | +0 |
| | 3.1% | | 15.8% | |
+----------------------------+-------+-------+-------+--------+

Results calculated with the following build configuration:

make PLAT=fvp SPD=tspd DEBUG=1 \
SDEI_SUPPORT=1 \
EL3_EXCEPTION_HANDLING=1 \
TSP_NS_INTR_ASYNC_PREEMPT=1 \
CTX_INCLUDE_PAUTH_REGS=1 \
ENABLE_PAUTH=1

Change-Id: I6cc1fe0b2345c547dcef66f98758c4eb55fe5ee4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...