Merge changes from topic "bk/no_blx_setup" into integration

* changes:
fix: replace stray BL2_AT_EL3 with RESET_TO_BL2
refactor(aarch64): move BL31 specific setup out of the PSCI entrypoint
re

Merge changes from topic "bk/no_blx_setup" into integration

* changes:
fix: replace stray BL2_AT_EL3 with RESET_TO_BL2
refactor(aarch64): move BL31 specific setup out of the PSCI entrypoint
refactor: unify blx_setup() and blx_main()
fix(bl2): unify the BL2 EL3 and RME entrypoints

show more ...

refactor: unify blx_setup() and blx_main()

All BLs have a bl_setup() for things that need to happen early, a fall
back into assembly and then bl_main() for the main functionality. This
was necessary

refactor: unify blx_setup() and blx_main()

All BLs have a bl_setup() for things that need to happen early, a fall
back into assembly and then bl_main() for the main functionality. This
was necessary in order to fiddle with PAuth related things that tend to
break C calls. Since then PAuth's enablement has seen a lot of
refactoring and this is now worked around cleanly so the distinction can
be removed. The only tradeoff is that this requires pauth to not be used
for the top-level main function.

There are two main benefits to doing this: First, code is easier to
understand as it's all together and the entrypoint is smaller. Second,
the compiler gets to see more of the code and apply optimisations
(importantly LTO).

Change-Id: Iddb93551115a2048988017547eb7b8db441dbd37
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>

show more ...

Merge changes from topic "za/feat_rme" into integration

* changes:
refactor(gpt): productize and refactor GPT library
feat(rme): disable Watchdog for Arm platforms if FEAT_RME enabled
docs(rme

Merge changes from topic "za/feat_rme" into integration

* changes:
refactor(gpt): productize and refactor GPT library
feat(rme): disable Watchdog for Arm platforms if FEAT_RME enabled
docs(rme): add build and run instructions for FEAT_RME
fix(plat/fvp): bump BL2 stack size
fix(plat/fvp): allow changing the kernel DTB load address
refactor(plat/arm): rename ARM_DTB_DRAM_NS region macros
refactor(plat/fvp): update FVP platform DTS for FEAT_RME
feat(plat/arm): add GPT initialization code for Arm platforms
feat(plat/fvp): add memory map for FVP platform for FEAT_RME
refactor(plat/arm): modify memory region attributes to account for FEAT_RME
feat(plat/fvp): add RMM image support for FVP platform
feat(rme): add GPT Library
feat(rme): add ENABLE_RME build option and support for RMM image
refactor(makefile): remove BL prefixes in build macros
feat(rme): add context management changes for FEAT_RME
feat(rme): add Test Realm Payload (TRP)
feat(rme): add RMM dispatcher (RMMD)
feat(rme): run BL2 in root world when FEAT_RME is enabled
feat(rme): add xlat table library changes for FEAT_RME
feat(rme): add Realm security state definition
feat(rme): add register definitions and helper functions for FEAT_RME

show more ...

feat(rme): run BL2 in root world when FEAT_RME is enabled

This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.

Using the existing BL2_

feat(rme): run BL2 in root world when FEAT_RME is enabled

This patch enables BL2 to run in root world (EL3) which is
needed as per the security model of RME-enabled systems.

Using the existing BL2_AT_EL3 TF-A build option is not convenient
because that option assumes TF-A BL1 doesn't exist, which is not
the case for RME-enabled systems. For the purposes of RME, we use
a normal BL1 image but we also want to run BL2 in EL3 as normally as
possible, therefore rather than use the special bl2_entrypoint
function in bl2_el3_entrypoint.S, we use a new bl2_entrypoint
function (in bl2_rme_entrypoint.S) which doesn't need reset or
mailbox initialization code seen in the el3_entrypoint_common macro.

The patch also cleans up bl2_el3_entrypoint.S, moving the
bl2_run_next_image function to its own file to avoid duplicating
code.

Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I99821b4cd550cadcb701f4c0c4dc36da81c7ef55

show more ...

Merge changes I15e7cc43,Id7411bd5,I92bafe70,I8f1c0658 into integration

* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid t

Merge changes I15e7cc43,Id7411bd5,I92bafe70,I8f1c0658 into integration

* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros

show more ...

Add PIE support for AARCH32

Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done

Add PIE support for AARCH32

Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done for
PIE support on AARCH64.
The RELA_SECTION is redefined for AARCH32, as the created section is
.rel.dyn and the symbols are .rel*.

Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9
Signed-off-by: Yann Gautier <yann.gautier@st.com>

show more ...

Merge "aarch32: stop speculative execution past exception returns" into integration

aarch32: stop speculative execution past exception returns

aarch32 CPUs speculatively execute instructions following a
ERET as if it was not a jump instruction. This could lead to
cache-based side c

aarch32: stop speculative execution past exception returns

aarch32 CPUs speculatively execute instructions following a
ERET as if it was not a jump instruction. This could lead to
cache-based side channel vulnerabilities. The software fix is
to place barrier instructions following ERET.

The counterpart patch for aarch64 is merged:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=f461fe346b728d0e88142fd7b8f2816415af18bc

Change-Id: I2aa3105bee0b92238f389830b3a3b8650f33af3d
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge pull request #1877 from bryanodonoghue/integration+bl2-el3-eret-fix-v2

bl2-el3: Fix exit to bl32 by ensuring full write to SPSR

bl2-el3: Fix exit to bl32 by ensuring a more complete write to SPSR

Prior to entry into BL32 we set the SPSR by way of msr spsr, r1.
This unfortunately only writes the bits f->[31:24] and c->[7:0].

bl2-el3: Fix exit to bl32 by ensuring a more complete write to SPSR

Prior to entry into BL32 we set the SPSR by way of msr spsr, r1.
This unfortunately only writes the bits f->[31:24] and c->[7:0].

This patch updates the bl2 exit path to write the x->[15:8] and c->[7:0]
fields of the SPSR. For the purposes of initial setup of the SPSR the x and
c fields should be sufficient and importantly will capture the necessary
lower-order control bits that f:c alone do not.

This is important to do to ensure the SPSR is set to the mode the platform
intends prior to performing an eret.

Fixes: b1d27b484f41 ("bl2-el3: Add BL2_EL3 image")

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

show more ...

Merge pull request #1829 from antonio-nino-diaz-arm/an/pauth

Add Pointer Authentication (ARMv8.3-PAuth) support to the TF

BL2_AT_EL3: Enable pointer authentication support

The size increase after enabling options related to ARMv8.3-PAuth is:

+----------------------------+-------+-------+-------+--------+
|

BL2_AT_EL3: Enable pointer authentication support

The size increase after enabling options related to ARMv8.3-PAuth is:

+----------------------------+-------+-------+-------+--------+
| | text | bss | data | rodata |
+----------------------------+-------+-------+-------+--------+
| CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 |
| | 0.2% | | | |
+----------------------------+-------+-------+-------+--------+
| ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 |
| | 3.1% | | 0.9% | |
+----------------------------+-------+-------+-------+--------+

The results are valid for the following build configuration:

make PLAT=fvp SPD=tspd DEBUG=1 \
BL2_AT_EL3=1 \
CTX_INCLUDE_PAUTH_REGS=1 \
ENABLE_PAUTH=1

Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #1301 from ldebieve/lde/issue-tf#562

bl2-el3: Fix bl32 lr_svc used for bl33 entry address

bl2-el3: Fix bl32 lr_svc used for bl33 entry address

When using BL2_EL3, we need to ensure that lr_svc is
properly given to bl32 as it was previously made by bl1.

Fixes ARM-Software/tf-issues#562

bl2-el3: Fix bl32 lr_svc used for bl33 entry address

When using BL2_EL3, we need to ensure that lr_svc is
properly given to bl32 as it was previously made by bl1.

Fixes ARM-Software/tf-issues#562

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

show more ...

Merge pull request #1200 from robertovargas-arm/bl2-el3

Add BL2_AT_EL3 build option

bl2-el3: Add BL2_EL3 image

This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly

bl2-el3: Add BL2_EL3 image

This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1. This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.

Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

show more ...