core: Refactor console_init() and introduce plat_console_init()

Since there are some cross-platform console drivers, we let
console_init() be common code to have a chance to initialize those
console

core: Refactor console_init() and introduce plat_console_init()

Since there are some cross-platform console drivers, we let
console_init() be common code to have a chance to initialize those
console drivers (e.g., semihosting console).

If the cross-platform console drivers are not configured to be compiled,
plat_console_init() will be invoked to initialize platform-specific
console driver.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>

show more ...

plat-rzn1: use gic_init_per_cpu()

Call gic_init_per_cpu() instead of the now deprecated gic_cpu_init().

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Sumit Garg <sumit.garg@li

plat-rzn1: use gic_init_per_cpu()

Call gic_init_per_cpu() instead of the now deprecated gic_cpu_init().

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>

show more ...

core: arm: Rename primary_init_intc() to boot_primary_init_intc()

Since interrupt controllers are usually initialized in boot stage,
rename primary_init_intc() to boot_primary_init_intc().

Signed-o

core: arm: Rename primary_init_intc() to boot_primary_init_intc()

Since interrupt controllers are usually initialized in boot stage,
rename primary_init_intc() to boot_primary_init_intc().

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

core: arm: Rename main_secondary_init_intc() to boot_secondary_init_intc()

main_secondary_*() is an ambiguous name since it conveys no meaning
relative to the purpose of the function. Fix it by rena

core: arm: Rename main_secondary_init_intc() to boot_secondary_init_intc()

main_secondary_*() is an ambiguous name since it conveys no meaning
relative to the purpose of the function. Fix it by renameing to
boot_secondary_init_intc(), since interrupt controllers are always
initialized in boot stage.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

core: rename interrupt controller functions

This commit renames interrupt controller function names
to be more generic:
- Rename main_init_gic() to primary_init_intc()
- Rename secondary_init_gic()

core: rename interrupt controller functions

This commit renames interrupt controller function names
to be more generic:
- Rename main_init_gic() to primary_init_intc()
- Rename secondary_init_gic() to secondary_init_intc()

Signed-off-by: Marouene Boubakri <marouene.boubakri@nxp.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

core: define main interrupt controller data from its driver

All but one platforms define CPU core interrupt controller from their
platform main.c source file next to its main interrupt handler.
This

core: define main interrupt controller data from its driver

All but one platforms define CPU core interrupt controller from their
platform main.c source file next to its main interrupt handler.
This change factorize these implementation by moving the definition
of the controller data instance straight in the controller driver
source file. This change makes each controller driver to implement
straight itr_core_handler() function, preventing a extra branch on
interrupt execution. Interrupt controller driver initialization
function now straight calls itr_core_init().

This changes treats case when CFG_CORE_WORKAROUND_ARM_NMFI is enable
to not conflict with core/arch/arm/kernel/thread.c that already
overrides itr_core_handler() weak implementation.

With this change, the main controller initialization function
(gic_init(), gic_init_base_addr(), gic_cpu_init() and hfic_init())
no more gets the controller data as input argument.

As a consequence, definition of struct hfic_data and struct gic_data
moves from their respective driver header file to the respective
driver source file.

As a consequence, gic_dump() no more requires an argument.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...

plat: arm: refactor GIC initialization

All platforms (except STM32MP1) follow the same pattern during GIC
initialization: get virtual addresses for distributor (and optionally,
for CPU interface), c

plat: arm: refactor GIC initialization

All platforms (except STM32MP1) follow the same pattern during GIC
initialization: get virtual addresses for distributor (and optionally,
for CPU interface), check that they are not NULL, call either
gic_init() or gic_init_base_addr().

We can move most of this logic into gic_init_base_addr(), while
platform-specific code will supply only base physical addresses for
distributor and CPU interface. This will simplify and align platform
code.

ST32MP1 had more complex logic, as it used io_pa_or_va_secure() to get
MMIO range addresses. However, as main_init_gic() called
assert(cpu_mmu_enabled()), there is no sense in using
io_pa_or_va_secure(), because we already ensured that VA will be
always used. Thus assert() call was moved to gic_init_base_addr(), and
STM32MP1 were aligned with other platforms.

Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...

plat-rzn1: Add Cortex-M3 start

The RZ/N1 platform contains a Cortex-M3 in addition to dual A7 cores.

Add CFG_BOOT_CM3 flat (default=y) to start the Cortex-M3 unit.

Signed-off-by: Ralph Siemsen <ra

plat-rzn1: Add Cortex-M3 start

The RZ/N1 platform contains a Cortex-M3 in addition to dual A7 cores.

Add CFG_BOOT_CM3 flat (default=y) to start the Cortex-M3 unit.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Acked-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because

core_mmu: fix phys_to_virt() to check length

phys_to_virt() function without length parameter doesn`t
always have ability to find the correct mapping for
requested physical address. This is because physical
address can be mapped in the same time in different virtual
regions with different length. So the first found region
which contains the requested physical address possibly
doesn`t have enough mapped data. This is fixed by adding
the length parameter to phys_to_virt() function. Length
parameter can be set to 1 if caller knows that requested
(pa + len) doesn`t cross mapping granule boundary.

core_mmu_get_va() and io_pa_or_va() functions now are
take length parameter too as they based on phys_to_virt()
in case of MMU enabled.

Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (stm32mp1-157C_DK2)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6dlsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6qpsabreauto)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6sllevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ullevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx6ulzevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7dsabresd)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx7ulpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mmevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mnevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mqevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8mpevk)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qmmek)
Tested-by: Clement Faure <clement.faure@nxp.com> (imx-mx8qxpmek)

show more ...

Add support for Renesas RZ/N1 platform

Add support for RZ/N1 platform from Renasas (PLATFORM=rzn1):
- Cortex-A7 based dual core processor.

This platform supports TrustZone based IO register access

Add support for Renesas RZ/N1 platform

Add support for RZ/N1 platform from Renasas (PLATFORM=rzn1):
- Cortex-A7 based dual core processor.

This platform supports TrustZone based IO register access control, so
add corresponding OEM service based implementation.

Link: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz/rzn/rzn1d.html
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jerome Forissier <jerome@forissier.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>

show more ...