xref: /utopia/UTPA2-700.0.x/projects/tools/lint/mips-linux-gnu_include/linux/can/bcm.h (revision 53ee8cc121a030b8d368113ac3e966b4705770ef)
1 /*
2  * linux/can/bcm.h
3  *
4  * Definitions for CAN Broadcast Manager (BCM)
5  *
6  * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
7  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
8  * All rights reserved.
9  *
10  * Send feedback to <socketcan-users@lists.berlios.de>
11  *
12  */
13 
14 #ifndef CAN_BCM_H
15 #define CAN_BCM_H
16 
17 /**
18  * struct bcm_msg_head - head of messages to/from the broadcast manager
19  * @opcode:    opcode, see enum below.
20  * @flags:     special flags, see below.
21  * @count:     number of frames to send before changing interval.
22  * @ival1:     interval for the first @count frames.
23  * @ival2:     interval for the following frames.
24  * @can_id:    CAN ID of frames to be sent or received.
25  * @nframes:   number of frames appended to the message head.
26  * @frames:    array of CAN frames.
27  */
28 struct bcm_msg_head {
29 	__u32 opcode;
30 	__u32 flags;
31 	__u32 count;
32 	struct timeval ival1, ival2;
33 	canid_t can_id;
34 	__u32 nframes;
35 	struct can_frame frames[0];
36 };
37 
38 enum {
39 	TX_SETUP = 1,	/* create (cyclic) transmission task */
40 	TX_DELETE,	/* remove (cyclic) transmission task */
41 	TX_READ,	/* read properties of (cyclic) transmission task */
42 	TX_SEND,	/* send one CAN frame */
43 	RX_SETUP,	/* create RX content filter subscription */
44 	RX_DELETE,	/* remove RX content filter subscription */
45 	RX_READ,	/* read properties of RX content filter subscription */
46 	TX_STATUS,	/* reply to TX_READ request */
47 	TX_EXPIRED,	/* notification on performed transmissions (count=0) */
48 	RX_STATUS,	/* reply to RX_READ request */
49 	RX_TIMEOUT,	/* cyclic message is absent */
50 	RX_CHANGED	/* updated CAN frame (detected content change) */
51 };
52 
53 #define SETTIMER            0x0001
54 #define STARTTIMER          0x0002
55 #define TX_COUNTEVT         0x0004
56 #define TX_ANNOUNCE         0x0008
57 #define TX_CP_CAN_ID        0x0010
58 #define RX_FILTER_ID        0x0020
59 #define RX_CHECK_DLC        0x0040
60 #define RX_NO_AUTOTIMER     0x0080
61 #define RX_ANNOUNCE_RESUME  0x0100
62 #define TX_RESET_MULTI_IDX  0x0200
63 #define RX_RTR_FRAME        0x0400
64 
65 #endif /* CAN_BCM_H */
66