xref: /utopia/UTPA2-700.0.x/projects/tmplib/include/drvVBI.h (revision 53ee8cc121a030b8d368113ac3e966b4705770ef)

//<MStar Software>
//******************************************************************************
// MStar Software
// Copyright (c) 2010 - 2012 MStar Semiconductor, Inc. All rights reserved.
// All software, firmware and related documentation herein ("MStar Software") are
// intellectual property of MStar Semiconductor, Inc. ("MStar") and protected by
// law, including, but not limited to, copyright law and international treaties.
// Any use, modification, reproduction, retransmission, or republication of all
// or part of MStar Software is expressly prohibited, unless prior written
// permission has been granted by MStar.
//
// By accessing, browsing and/or using MStar Software, you acknowledge that you
// have read, understood, and agree, to be bound by below terms ("Terms") and to
// comply with all applicable laws and regulations:
//
// 1. MStar shall retain any and all right, ownership and interest to MStar
//    Software and any modification/derivatives thereof.
//    No right, ownership, or interest to MStar Software and any
//    modification/derivatives thereof is transferred to you under Terms.
//
// 2. You understand that MStar Software might include, incorporate or be
//    supplied together with third party`s software and the use of MStar
//    Software may require additional licenses from third parties.
//    Therefore, you hereby agree it is your sole responsibility to separately
//    obtain any and all third party right and license necessary for your use of
//    such third party`s software.
//
// 3. MStar Software and any modification/derivatives thereof shall be deemed as
//    MStar`s confidential information and you agree to keep MStar`s
//    confidential information in strictest confidence and not disclose to any
//    third party.
//
// 4. MStar Software is provided on an "AS IS" basis without warranties of any
//    kind. Any warranties are hereby expressly disclaimed by MStar, including
//    without limitation, any warranties of merchantability, non-infringement of
//    intellectual property rights, fitness for a particular purpose, error free
//    and in conformity with any international standard.  You agree to waive any
//    claim against MStar for any loss, damage, cost or expense that you may
//    incur related to your use of MStar Software.
//    In no event shall MStar be liable for any direct, indirect, incidental or
//    consequential damages, including without limitation, lost of profit or
//    revenues, lost or damage of data, and unauthorized system use.
//    You agree that this Section 4 shall still apply without being affected
//    even if MStar Software has been modified by MStar in accordance with your
//    request or instruction for your use, except otherwise agreed by both
//    parties in writing.
//
// 5. If requested, MStar may from time to time provide technical supports or
//    services in relation with MStar Software to you for your use of
//    MStar Software in conjunction with your or your customer`s product
//    ("Services").
//    You understand and agree that, except otherwise agreed by both parties in
//    writing, Services are provided on an "AS IS" basis and the warranty
//    disclaimer set forth in Section 4 above shall apply.
//
// 6. Nothing contained herein shall be construed as by implication, estoppels
//    or otherwise:
//    (a) conferring any license or right to use MStar name, trademark, service
//        mark, symbol or any other identification;
//    (b) obligating MStar or any of its affiliates to furnish any person,
//        including without limitation, you and your customers, any assistance
//        of any kind whatsoever, or any information; or
//    (c) conferring any license or right under any intellectual property right.
//
// 7. These terms shall be governed by and construed in accordance with the laws
//    of Taiwan, R.O.C., excluding its conflict of law rules.
//    Any and all dispute arising out hereof or related hereto shall be finally
//    settled by arbitration referred to the Chinese Arbitration Association,
//    Taipei in accordance with the ROC Arbitration Law and the Arbitration
//    Rules of the Association by three (3) arbitrators appointed in accordance
//    with the said Rules.
//    The place of arbitration shall be in Taipei, Taiwan and the language shall
//    be English.
//    The arbitration award shall be final and binding to both parties.
//
//******************************************************************************
//<MStar Software>
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (c) 2008-2009 MStar Semiconductor, Inc.
// All rights reserved.
//
// Unless otherwise stipulated in writing, any and all information contained
// herein regardless in any format shall remain the sole proprietary of
// MStar Semiconductor Inc. and be kept in strict confidence
// (!��MStar Confidential Information!�L) by the recipient.
// Any unauthorized act including without limitation unauthorized disclosure,
// copying, use, reproduction, sale, distribution, modification, disassembling,
// reverse engineering and compiling of the contents of MStar Confidential
// Information is unlawful and strictly prohibited. MStar hereby reserves the
// rights to any and all damages, losses, costs and expenses resulting therefrom.
//
////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
///
/// @file   drvVBI.h
/// @brief  MStar VBI Driver Interface
/// @author MStar Semiconductor Inc.
/// @version 1.0
///////////////////////////////////////////////////////////////////////////////////////////////////

//-------------------------------------------------
/*! \defgroup VBI VBI interface
    \ingroup  VBI

    <b> Operation Code Flow: </b> \n
    \image html vbi1.png
    \image html vbi2.png

  *! \defgroup VBI_General VBI general functions
  *   \ingroup   VBI

  *! \defgroup VBI_Task VBI process functions.
  *   \ingroup   VBI

  *! \defgroup VBI_TTX VBI TTX related functions
  *   \ingroup   VBI

  *! \defgroup VBI_CC VBI CC related functions
  *   \ingroup   VBI

  *! \defgroup VBI_STR VBI STR functions
  *   \ingroup   VBI

  *! \defgroup VBI_ToBeModified VBI api to be modified
  *   \ingroup   VBI

  *! \defgroup VBI_TTX_ToBeModified VBI TTX api to be modified
  *   \ingroup   VBI_ToBeModified

  *! \defgroup VBI_ToBeRemove VBI api to be removed
  *   \ingroup   VBI
  */
//-------------------------------------------------

#ifndef _DRV_VBI_H
#define _DRV_VBI_H

#include "MsTypes.h"
#include "MsDevice.h"

#include "ULog.h"

#ifdef __cplusplus
extern "C"
{
#endif

#define VBI_UTOPIA20 (1)

//-------------------------------------------------------------------------------------------------
//  Driver Capability
//-------------------------------------------------------------------------------------------------


//-------------------------------------------------------------------------------------------------
//  Macro and Define
//-------------------------------------------------------------------------------------------------
#define VBI_TTX_DATA_LENGTH 48

#define MSIF_VBI_LIB_CODE                   {'V','B','I','_'} //Lib code
#define MSIF_VBI_LIBVER                        {'0','0'}      //LIB version
#define MSIF_VBI_BUILDNUM                 {'0','2' }    //Build Number
#define MSIF_VBI_CHANGELIST             {'0','0','5','6','5','9','8','0'} //P4 ChangeList Number
#define VBI_VER                  /* Character String for DRV/API version             */  \
    MSIF_TAG,                           /* 'MSIF'                                           */  \
    MSIF_CLASS,                         /* '00'                                             */  \
    MSIF_CUS,                           /* 0x0000                                           */  \
    MSIF_MOD,                           /* 0x0000                                           */  \
    MSIF_CHIP,                                                                                  \
    MSIF_CPU,                                                                                   \
    MSIF_VBI_LIB_CODE,                  /* IP__                                             */  \
    MSIF_VBI_LIBVER,                       /* 0.0 ~ Z.Z                                        */  \
    MSIF_VBI_BUILDNUM,                 /* 00 ~ 99                                          */  \
    MSIF_VBI_CHANGELIST,             /* CL#                                              */  \
    MSIF_OS


//-------------------------------------------------------------------------------------------------
//  Type and Structure
//-------------------------------------------------------------------------------------------------
typedef enum
{
    VBI_VIDEO_SECAM,
    VBI_VIDEO_PAL_NC,
    VBI_VIDEO_PAL_M,
    VBI_VIDEO_NTSC,
    VBI_VIDEO_NTSC443_PAL60,
    VBI_VIDEO_PAL,
    VBI_VIDEO_OTHERS
} VBI_VIDEO_STANDARD;

typedef enum
{
    E_VBI_TELETEXT,
    E_VBI_CC
} VBI_INIT_TYPE;

typedef struct
{
    MS_U8   u8NoInfo;
} VBI_DrvInfo;

typedef struct
{
    VBI_INIT_TYPE   eInitType;
} VBI_DrvStatus;

typedef struct
{
    MS_BOOL _bSuspend;
    VBI_INIT_TYPE eInitType;
    MS_VIRT _ptrVBIRiuBaseAddr;

    // TTX buffer address & buffer size
    MS_PHY  _TTXBufAddr;
    MS_U16  _TTXBufLen;

    // CC buffer address & buffer size
    MS_PHY  _CCBufAddr;
    MS_U16  _CCBufLen;

    // callback info
    MS_PHY  _cbBufferAddr;
    MS_U32  _cbBufferLength;
    MS_U8  *_pCbVABuff;

    MS_BOOL  _bTTXSupported;
    MS_BOOL  _bVBIInit;
    MS_U16  _u16VBIDbgSwitch;
} VBI_StoreInfo;

/*
 * ClosedCaption
 */
typedef enum
{
    VBI_CC_PACKET_COUNT,
    VBI_CC_BYTE_FOUND_INDICATION,
    VBI_CC_DATA_GET

} EN_VBI_INFO;

/* Error code */
typedef enum
{
    VBI_ERRORCODE_SUCCESS            = 0x0000,
    VBI_ERRORCODE_FAIL               = 0x0001

} EN_VBI_ERRORCODE;

typedef enum
{
    EN_TTX_DMA_HEADER,
    EN_TTX_DMA_PACKET1_TO_25,
    EN_TTX_DMA_PACKET26_28_29,
    EN_TTX_DMA_PACKET27,
    EN_TTX_DMA_BTT,
    EN_TTX_DMA_AIT,
} EN_TTX_DMA_TYPE;

typedef enum
{
    VBI_INIT,
    VBI_EXIT,
    VBI_SUSPEND,
    VBI_RESUME,
} EN_VBI_CMD;

typedef MS_U32(*VBI_CB_FN)(MS_U8 *pVBILine, MS_U32 length);
//-------------------------------------------------------------------------------------------------
//  Function and Variable
//-------------------------------------------------------------------------------------------------

// must have functions
//-------------------------------------------------------------------------------------------------
/// Get VBI lib version.
/// @ingroup VBI_General
/// @param  pFN             \b OUT: return vbi lib version.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_GetLibVer(const MSIF_Version **ppVersion);                  ///< Get version (without Mutex protect)
//-------------------------------------------------------------------------------------------------
/// Get VBI module info.
/// @ingroup VBI_General
/// @return VBI_DrvInfo
//-------------------------------------------------------------------------------------------------
// const VBI_DrvInfo * MDrv_VBI_GetInfo(void);              ///< Get info from driver (without Mutex protect)
//-------------------------------------------------------------------------------------------------
/// Get VBI Driver Status.
/// @ingroup VBI_General
/// @param  pDrvStatus    \b OUT: driver status.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_GetStatus(VBI_DrvStatus *pDrvStatus);   ///< Get VBI current status
//-------------------------------------------------------------------------------------------------
/// Set VBI Debug Level.
/// @ingroup VBI_General
/// @param  u16DbgSwitch    \b IN: debug level.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_SetDbgLevel(MS_U16 u16DbgSwitch);       ///< Set debug level (without Mutex protect)

//-----------------
// VBI_General
//-----------------
//-------------------------------------------------------------------------------------------------
/// Initialize VBI module
/// @ingroup VBI_General
/// @param  type      \b IN: VBI type (Teletext/CC)
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_Init(VBI_INIT_TYPE type);
//-------------------------------------------------------------------------------------------------
/// Finalize VBI module
/// @ingroup VBI_General
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_Exit(void);

//-------------------------------------------------------------------------------------------------
/// Set Callback to VBI driver, the CB will be called if VBI interrupt is catched
/// @ingroup VBI_Task
/// @param  pFN              \b IN: call back function pointer.
/// @param  bufferAddr    \b IN: the physical address of buffer which will store VBI data and pass pointer to CB
/// @param  length           \b IN: the data lebgth of th input buffer. Note: it should be the multiple of VBI_TTX_DATA_LENGTH
/// @return None
//-------------------------------------------------------------------------------------------------
// void MDrv_VBI_RegisterCB(VBI_CB_FN pFN, MS_PHY bufferAddr, MS_U32 length);

//-------------------------------------------------------------------------------------------------
/// Reset TTX Ring Buffer
/// @ingroup VBI_Task
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_RingBuffer_Reset(void);

//-------------------------------------------------------------------------------------------------
/// Initialize TTX Slicer.
/// @ingroup VBI_TTX
/// @param  bufferAddr     \b IN: TTX buffer address.
/// @param  packetCount  \b IN: TTX packet count.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_InitializeTTXSlicer(MS_PHY bufferAddr, MS_U16 packetCount);

//-------------------------------------------------------------------------------------------------
/// Enable TTX Slicer.
/// @ingroup VBI_TTX
/// @param bEnable     \b IN: enable or disable TTX slicer.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_EnableTTXSlicer(MS_BOOL bEnable);

//-------------------------------------------------------------------------------------------------
/// VPS Is Ready or Not. (Refine function name: MDrv_VBI_TTX_IsVPS_Ready)
/// @ingroup VBI_TTX_ToBeModified
/// @return TRUE  : VPS is ready.
/// @return FALSE : VPS is not ready.
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_IsVPS_Ready(void);

//-------------------------------------------------------------------------------------------------
/// TTX Is Ready or Not.
/// @ingroup VBI_TTX
/// @return TRUE  : TTX is ready.
/// @return FALSE : TTX is not ready.
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_IsTTX_Ready(void);

//-------------------------------------------------------------------------------------------------
/// WSS Is Ready or Not. (Refine function name: MDrv_VBI_TTX_IsWSS_Ready)
/// @ingroup VBI_TTX_ToBeModified
/// @return TRUE  : WSS is ready.
/// @return FALSE : WSS is not ready.
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_IsWSS_Ready(void);

//-------------------------------------------------------------------------------------------------
/// Get WSS Data. (Refine function name: MDrv_VBI_TTX_GetWSS_Data)
/// @ingroup VBI_TTX_ToBeModified
/// @return : WSS data
//-------------------------------------------------------------------------------------------------
MS_U16 MDrv_VBI_GetWSS_Data(void);

//-------------------------------------------------------------------------------------------------
/// Get VPS Data. (Refine function name: MDrv_VBI_TTX_GetVPS_Data)
/// @ingroup VBI_TTX_ToBeModified
/// @param  lowerWord    \b OUT: VPS lower data.
/// @param  higherWord   \b OUT: VPS higher data.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_GetVPS_Data(MS_U8 *lowerWord, MS_U8 *higherWord);

//-------------------------------------------------------------------------------------------------
/// Set Video Standard. (Refine function name: MDrv_VBI_TTX_SetVideoStandard)
/// @ingroup VBI_TTX_ToBeModified
/// @param  lowerWord    \b IN: type (NTSC/PAL/SECAM). See VBI_VIDEO_STANDARD.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_SetVideoStandard(VBI_VIDEO_STANDARD eStandard);

//-------------------------------------------------------------------------------------------------
/// Check TTX circuit ready.
/// @ingroup VBI_TTX
/// @return TRUE  : TTX circuit is ready.
/// @return FALSE : TTX circuit is not ready.
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_TTX_CheckCircuitReady(void);

//-------------------------------------------------------------------------------------------------
/// Get TTX Packet Count.
/// @ingroup VBI_TTX
/// @return : TTX packet count
//-------------------------------------------------------------------------------------------------
// MS_U16 MDrv_VBI_TTX_GetPacketCount(void);

//-------------------------------------------------------------------------------------------------
/// Check if the TTX packet in VBI buffer is empty.
/// @ingroup VBI_TTX
/// @return TRUE  : TTX buffer is empty.
/// @return FALSE : TTX buffer is not empty.
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_TTX_PacketBufferIsEmpty(void);

// Get all of the packets in the VBI buffer (if the input buffer is big enough)
//-------------------------------------------------------------------------------------------------
/// Get TTX Packets. (Get all of the packets in the VBI buffer (if the input buffer is big enough))
/// @ingroup VBI_TTX
/// @param  dataAddr   \b IN:   Data address.
/// @param  length       \b OUT: Packet length.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_TTX_GetPackets(MS_PHY dataAddr, MS_U32 *length);

// Get 1 of the packets in the VBI buffer
//-------------------------------------------------------------------------------------------------
/// Get TTX Packets. (Get 1 of the packets in the VBI buffer)
/// @ingroup VBI_TTX
/// @param  packetAddress   \b OUT: Packet address
/// @return TRUE  : Get TTX packet successfully.
/// @return FALSE : Get TTX packet unsuccessfully.
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_TTX_GetPacket(MS_PHY *packetAddress);

//-------------------------------------------------------------------------------------------------
/// Check if there is a packet buffer overflow. If there is an overflow,
/// the the packet buffer should be cleared from the reading task.
/// @ingroup VBI_TTX
/// @return TRUE  : TTX buffer is overflow.
/// @return FALSE : Otherwise.
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_TTX_PacketBufferIsOverflow( void );

//-------------------------------------------------------------------------------------------------
/// Resuren the nomber of packet buffer overflows since the last reset or creation.
/// @ingroup VBI_TTX
/// @return : The number of packet buffer overflows.
//-------------------------------------------------------------------------------------------------
MS_U16 MDrv_VBI_TTX_PacketBufferGetNoOfOverflows( void );

//-------------------------------------------------------------------------------------------------
/// Set TTX Enable Line
/// @ingroup VBI_TTX
/// @param  StartLine   \b IN: TTX start line
/// @param  EndLine    \b IN: TTX end line
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_TTX_EnableLine(MS_U16 StartLine, MS_U16 EndLine);


//-------------------------------------------------------------------------------------------------
/// Restrict vbi memory buffer range.
/// @ingroup VBI_Task
/// @param  bEnable    \b IN: set enable protect.
/// @param  phyAddr   \b IN: start address of the range.
/// @param  u32Size    \b IN: size of the range.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_ProtectMemory(MS_BOOL bEnable, MS_PHY phyAddr, MS_U32 u32Size);

/*
 *  ClosedCaption
 */
//-------------------------------------------------------------------------------------------------
/// Initialize CC Slicer.
/// @ingroup VBI_CC
/// @param  u32RiuAddr     \b IN: VBI CC RIU address.
/// @param  bufferAddr      \b IN: VBI CC buffer address.
/// @param  packetCount   \b IN: VBI CC packet count.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_CC_InitSlicer(MS_VIRT u32RiuAddr, MS_PHY bufferAddr, MS_U16 packetCount);
//-------------------------------------------------------------------------------------------------
/// Initialize CC CVBS number.
/// @ingroup VBI_CC
/// @param  cvbs_no     \b IN: CVBS number.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_CC_InitYPbYr(MS_U8 cvbs_no);
//-------------------------------------------------------------------------------------------------
/// Enable CC Slicer.
/// @ingroup VBI_CC
/// @param  bEnable     \b IN: enable or disable CC slicer.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_CC_EnableSlicer(MS_BOOL bEnable);
//-------------------------------------------------------------------------------------------------
/// Set CC Data Rate.
/// @ingroup VBI_CC
/// @param  ptable    \b OUT: data rate table.
/// @return : Data rate or 0 when failed
//-------------------------------------------------------------------------------------------------
MS_U8 MDrv_VBI_CC_SetDataRate(MS_U8 *ptable);
//-------------------------------------------------------------------------------------------------
/// Set CC Frame Count.
/// @ingroup VBI_CC
/// @param  cnt     \b IN: frame count.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_CC_SetFrameCnt(MS_U8 cnt);
//-------------------------------------------------------------------------------------------------
/// Get CC Information.
/// @ingroup VBI_CC
/// @param  selector  \b IN: CC function select.
/// @return : packet count or indication
//-------------------------------------------------------------------------------------------------
MS_U32 MDrv_VBI_CC_GetInfo(MS_U32 selector);
//-------------------------------------------------------------------------------------------------
/// Enable CC Line.
/// @ingroup VBI_CC
/// @param  StartLine    \b IN: start line.
/// @param  EndLine     \b IN: end line.
/// @param  mode        \b IN: NTSC/PAL/SECAM mode.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_CC_EnableLine(MS_U16 StartLine, MS_U16 EndLine, MS_U8 mode);
//-------------------------------------------------------------------------------------------------
/// Fresh memory to avoid cache coherence issue. (Use MsOS function)
/// @ingroup VBI_ToBeRemove
/// @param  u32Start    \b IN: start address (must be 16-B aligned and in cacheable area).
/// @param  u32Size     \b IN: size (must be 16-B aligned).
/// @return TRUE  : Succeed
/// @return FALSE : Fail due to invalide parameter
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_SyncMemory( MS_U32 u32Start, MS_U32 u32Size );
//-------------------------------------------------------------------------------------------------
/// Set CC SC window length.
/// @ingroup VBI_CC
/// @param  u8Len  \b IN: windows length.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_CC_SetSCWindowLen(MS_U8 u8Len);
//-------------------------------------------------------------------------------------------------
/// Set CC standard.
/// @ingroup VBI_CC
/// @param  eStandard  \b IN: video standard.
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
MS_BOOL MDrv_VBI_CC_SetVideoStandard(VBI_VIDEO_STANDARD eStandard);

/*
 *  Others
 */
//-------------------------------------------------------------------------------------------------
/// Set WSS/VPS Byte Number. (Refine function name: MDrv_VBI_TTX_WSS_SetVpsByteNum)
/// @ingroup VBI_TTX_ToBeModified
/// @param  cnt    \b IN: byte number.
/// @return None
//-------------------------------------------------------------------------------------------------
void MDrv_VBI_WSS_SetVpsByteNum(MS_U8 cnt);

//-------------------------------------------------------------------------------------------------
/// Save VBI driver states to DRAM.
/// @ingroup VBI_STR
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_Suspend(void);
//-------------------------------------------------------------------------------------------------
/// Restore VBI driver states from DRAM
/// @ingroup VBI_STR
/// @return TRUE  : Succeed
/// @return FALSE : Fail
//-------------------------------------------------------------------------------------------------
// MS_BOOL MDrv_VBI_Resume(void);
//-------------------------------------------------------------------------------------------------
/// Control VBI STR functions.
/// @ingroup VBI_STR
/// @param  u16PowerState  \b IN: STR power mode. (to control STR suspend & resume case.)
/// @return : Utopia status - UTOPIA_STATUS_SUCCESS (Succeed) or UTOPIA_STATUS_FAIL (Fail)
//-------------------------------------------------------------------------------------------------
MS_U32  MDrv_VBI_SetPowerState(EN_POWER_MODE u16PowerState);

#ifdef __cplusplus
}
#endif

#endif