xref: /utopia/UTPA2-700.0.x/modules/usb/drv/usbhost/source/drvHostLib.h (revision 53ee8cc121a030b8d368113ac3e966b4705770ef)

//<MStar Software>
//******************************************************************************
// MStar Software
// Copyright (c) 2010 - 2012 MStar Semiconductor, Inc. All rights reserved.
// All software, firmware and related documentation herein ("MStar Software") are
// intellectual property of MStar Semiconductor, Inc. ("MStar") and protected by
// law, including, but not limited to, copyright law and international treaties.
// Any use, modification, reproduction, retransmission, or republication of all
// or part of MStar Software is expressly prohibited, unless prior written
// permission has been granted by MStar.
//
// By accessing, browsing and/or using MStar Software, you acknowledge that you
// have read, understood, and agree, to be bound by below terms ("Terms") and to
// comply with all applicable laws and regulations:
//
// 1. MStar shall retain any and all right, ownership and interest to MStar
//    Software and any modification/derivatives thereof.
//    No right, ownership, or interest to MStar Software and any
//    modification/derivatives thereof is transferred to you under Terms.
//
// 2. You understand that MStar Software might include, incorporate or be
//    supplied together with third party`s software and the use of MStar
//    Software may require additional licenses from third parties.
//    Therefore, you hereby agree it is your sole responsibility to separately
//    obtain any and all third party right and license necessary for your use of
//    such third party`s software.
//
// 3. MStar Software and any modification/derivatives thereof shall be deemed as
//    MStar`s confidential information and you agree to keep MStar`s
//    confidential information in strictest confidence and not disclose to any
//    third party.
//
// 4. MStar Software is provided on an "AS IS" basis without warranties of any
//    kind. Any warranties are hereby expressly disclaimed by MStar, including
//    without limitation, any warranties of merchantability, non-infringement of
//    intellectual property rights, fitness for a particular purpose, error free
//    and in conformity with any international standard.  You agree to waive any
//    claim against MStar for any loss, damage, cost or expense that you may
//    incur related to your use of MStar Software.
//    In no event shall MStar be liable for any direct, indirect, incidental or
//    consequential damages, including without limitation, lost of profit or
//    revenues, lost or damage of data, and unauthorized system use.
//    You agree that this Section 4 shall still apply without being affected
//    even if MStar Software has been modified by MStar in accordance with your
//    request or instruction for your use, except otherwise agreed by both
//    parties in writing.
//
// 5. If requested, MStar may from time to time provide technical supports or
//    services in relation with MStar Software to you for your use of
//    MStar Software in conjunction with your or your customer`s product
//    ("Services").
//    You understand and agree that, except otherwise agreed by both parties in
//    writing, Services are provided on an "AS IS" basis and the warranty
//    disclaimer set forth in Section 4 above shall apply.
//
// 6. Nothing contained herein shall be construed as by implication, estoppels
//    or otherwise:
//    (a) conferring any license or right to use MStar name, trademark, service
//        mark, symbol or any other identification;
//    (b) obligating MStar or any of its affiliates to furnish any person,
//        including without limitation, you and your customers, any assistance
//        of any kind whatsoever, or any information; or
//    (c) conferring any license or right under any intellectual property right.
//
// 7. These terms shall be governed by and construed in accordance with the laws
//    of Taiwan, R.O.C., excluding its conflict of law rules.
//    Any and all dispute arising out hereof or related hereto shall be finally
//    settled by arbitration referred to the Chinese Arbitration Association,
//    Taipei in accordance with the ROC Arbitration Law and the Arbitration
//    Rules of the Association by three (3) arbitrators appointed in accordance
//    with the said Rules.
//    The place of arbitration shall be in Taipei, Taiwan and the language shall
//    be English.
//    The arbitration award shall be final and binding to both parties.
//
//******************************************************************************
//<MStar Software>
///////////////////////////////////////////////////////////////////////////////
//
//	File name: Lib_Host20.H
//	Version: 1.0
//	Date: 2004/12/08
//
//	Author: Bruce
//	Phone: (03) 578-7888
//	Company: Faraday Tech. Corp.
//
//	Description: 1.EHCI Data Structure
//               2.EHCI Register
//               3.Others
///////////////////////////////////////////////////////////////////////////////
#ifndef LIB_HOST200__H
#define  LIB_HOST200__H

#include "../drvUsbHostConfig.h"
#include "MsCommon.h"
#include "MsIRQ.h"
#include "MsOS.h"
#if 0
typedef unsigned char   UINT8;     // 1 byte
/// data type unsigned short, data length 2 byte
typedef unsigned int  UINT16;    // 2 bytes
/// data type unsigned int, data length 4 byte
typedef unsigned long    UINT32;    // 4 bytes
/// data type signed char, data length 1 byte
#endif

#ifndef ATV_SERISE_USE
#ifdef  CERAMAL_SERISE_USE

#else

#endif
#define USBDELAY(x)	    MsOS_DelayTask(x)
#else
#define BOOLEAN    UINT8
#define INT32U     UINT32
#define INT16U     UINT16
#define INT8U      UINT8
#endif

extern void USB_Write_REG32(UINT8 addr,UINT32 val);
extern U32 USB_BUFFER_START_ADR_4K_ALIGN_Var;

//=================== 1.Condition Definition  ============================================================
//========================================================================================================


    #define FUSBH200_HOST_ONLY


	#define Host20_Debug_Info	                   0x01
	#define IRQ_USB_Host20	                       40
	#define Host20_Set_Address	                   0x03

   //Host Configuration
	#define Host20_QHD_Nat_Counter                 0x00//Temp Solution from 15 to 0                //Bit28~31
	//#define Host20_EOF1Time                        0x00//For Full Speed Device
	#define Host20_EOF1Time                        0x03//For High Speed Device

//=================== 2.Variable Definition  ============================================================
//========================================================================================================
    #define HOST20_OK                              0x00
    #define HOST20_FAIL                            0x01
    #define HOST20_FATAL                      0x02
    #define HOST20_DEVICE_STALL             0x03
    #define HOST20_TRANSACTION_ERROR   0x04
    //----------------------------------
    #define   USB_OK                    0
    #define   USB_DISCONNECTED        1
    #define   USB_TIMEOUT            2
    #define   USB_TRANS_ERROR   3
    #define   USB_EJECT                4
    #define   USB_INIT_FAIL         5

   //****************************
   // Data Structure Allocation
   //****************************
   // 0x3000000~0x3001000  =>qHD
   // 0x3001000~0x3002000  =>qTD
   // 0x3002000~0x3003000  =>iTD
   //


 //  #if (USB_BUFFER_START_ADR_4K_ALIGN % 4096 != 0)
  // #error USB_BUFFER_START_ADR_4K_ALIGN needs 4K-byte alignment
  // #endif




	#define Host20_qHD_SIZE	                        0x40//(48bytes), for alignment
	#define Host20_qHD_MAX	                        10//(10 )

	#define Host20_qTD_SIZE	                        0x20//(32bytes)
	#define Host20_qTD_MAX	                        0x10//(50 )

	// Control Transfer Data stage buffer size
	#define CONTROL_DMA_BUF_LEN                     0x1000
	#define CONTROL_BUF_LEN                         0x1000



//	#define Host20_STRUCTURE_iTD_BASE_ADDRESS	    (Host20_STRUCTURE_BASE_ADDRESS+0x10000)//(DRAM=48M)
//	#define Host20_iTD_SIZE	                        0x40//(64bytes)
//	#define Host20_iTD_MAX	                        1024//(10 )




	#define Host20_MEM_TYPE_qTD               	        0x00
	#define Host20_MEM_TYPE_iTD               	        0x01
	#define Host20_MEM_TYPE_4K_BUFFER         	        0x02
	#define Host20_MEM_TYPE_siTD               	        0x03



	#define Host20_MEM_FREE         	            0x01
	#define Host20_MEM_USED         	            0x02


#if 0   // use the define in DataType.h
	#define BIT8			                 0x00000100
	#define BIT9			                 0x00000200
	#define BIT10			                 0x00000400
	#define BIT11			                 0x00000800
	#define BIT12			                 0x00001000
	#define BIT13			                 0x00002000
	#define BIT14			                 0x00004000
	#define BIT15			                 0x00008000
#endif
	#define BIT16			                 0x00010000
	#define BIT17			                 0x00020000
	#define BIT18			                 0x00040000
	#define BIT19			                 0x00080000
	#define BIT20			                 0x00100000
	#define BIT21			                 0x00200000
	#define BIT22			                 0x00400000
	#define BIT23			                 0x00800000

	#define BIT24			                 0x01000000
	#define BIT25			                 0x02000000
	#define BIT26			                 0x04000000
	#define BIT27			                 0x08000000
	#define BIT28			                 0x10000000
	#define BIT29			                 0x20000000
	#define BIT30			                 0x40000000
	#define BIT31			                 0x80000000


 #define OTGH_Dir_IN 	                         0x01
 #define OTGH_Dir_Out 	                         0x00
 #define OTGH_NULL			             0x00
 #define OTGH_ED_ISO 	                       0x01
 #define OTGH_ED_BULK 	                       0x02
 #define OTGH_ED_INT 	                       0x03
 #define OTGH_ED_Control	                   0x00
 #define OTGH_FARADAY_TEST_AP                  0x10237856
 #define OTGH_SRP_HNP_Enable                   0x03
 #define OTGH_Remote_Wake_UP                   0x00000400
 #define OTGH_Remote_Wake_UP_INT               0x00000008


unsigned char mwHost20Port(int bOffset);
void mwHost20Port_wr(int bOffset, int value);
int  mwHost20Bit_Rd(int bByte,int wBitNum);
void  mwHost20Bit_Set(int bByte,int wBitNum);
void  mwHost20Bit_Clr(int bByte,int wBitNum);

//=================== 2.Define Register Macro ================================================================
//========================================================================================================
extern U32  gUHC_BASE;
	//<1>.Macro volatile
//	#define Host20_BASE_ADDRESS	                      UHC_BASE//0x92500000
//	#define mwHost20Port(bOffset)	                  *((UINT8 volatile  xdata *) ( Host20_BASE_ADDRESS | bOffset))
//	#define mwHost20Port(bOffset)	                  *((UINT8 volatile  xdata *) ( gUHC_BASE | bOffset))
///	#define mwHost20Port(bOffset)	                  *((U16 volatile  *) ( gUHC_BASE | bOffset))
///	#define mwHost20Bit_Rd(bByte,wBitNum)            (mwHost20Port(bByte)&wBitNum)
///	#define mwHost20Bit_Set(bByte,wBitNum)           (mwHost20Port(bByte)|=wBitNum)
///	#define mwHost20Bit_Clr(bByte,wBitNum)           (mwHost20Port(bByte)&=~wBitNum)
        #define mwHost20Port_word(bOffset)                      *((UINT16 volatile  *) ( gUHC_BASE | bOffset))

	//<2>.0x000(Capability Register)
	//#define mwHost20_HCIVersion_Rd()		          ((mwHost20Port(0x00)>>16)&0x0000FFFF)
	//#define mwHost20_CapLength_Rd()		              (mwHost20Port(0x00)&0x000000FF)

	//<3>.0x004(HCSPARAMS - Structural Parameters)
	#define mwHost20_NumPorts_Rd()		              ((mwHost20Port(0x04)&0x0000000F)

	//<4>.0x008(HCCPARAMS - Capability Parameters)
	#define mbHost20_ProgrammableFrameListFlag_Rd()		(mwHost20Bit_Rd(0x08,BIT1)) 	//Bit 1

	//<4>.0x010(USBCMD - USB Command Register)
	//#define mwHost20_USBCMD_IntThreshold_Rd()		          ((mwHost20Port(0x010)>>16)&0x0000FFFF)	//Bit 16~23
	//#define mbHost20_USBCMD_IntThreshold_Set(bValue)		  (mwHost20Port(0x010)=((mwHost20Port(0x010)&0xFF00FFFF)|(((UINT32)(bValue))<<16))	//Bit 16~23
    //----->Add  "Asynchronous schedule Park mode ENable"
    //----->Add  "ASYNchronous schedule Park mode CouNT"

	//#define mbHost20_USBCMD_ParkMode_Rd()       	          (mwHost20Bit_Rd(0x10,BIT11)>>11)
	//#define mbHost20_USBCMD_ParkMode_Set()     	              (mwHost20Bit_Set(0x10,BIT11))
	//#define mbHost20_USBCMD_ParkMode_Clr()	                  (mwHost20Bit_Clr(0x10,BIT11))

	#define mbHost20_USBCMD_ParkMode_CNT_Rd()       	      ((mwHost20Port(0x10)>>8)&0x00000003)
	#define mbHost20_USBCMD_ParkMode_CNT_Set(bValue)     	  (mwHost20Port(0x011)=(mwHost20Port(0x011)&0xFC)|(( (UINT8) bValue )<<8)  )	//Bit 8~9

	#define mbHost20_USBCMD_InterruptOnAsync_Rd()       	  (mwHost20Bit_Rd(0x10,BIT6)) 	//Bit 6
	#define mbHost20_USBCMD_InterruptOnAsync_Set()     	      (mwHost20Bit_Set(0x10,BIT6))    //Bit 6
	#define mbHost20_USBCMD_InterruptOnAsync_Clr()	          (mwHost20Bit_Clr(0x10,BIT6))	//Bit 6

	#define mbHost20_USBCMD_AsynchronousEnable_Rd()     	  (mwHost20Bit_Rd(0x10,BIT5))     //Bit 5
	#define mbHost20_USBCMD_AsynchronousEnable_Set()     	  (mwHost20Bit_Set(0x10,BIT5))    //Bit 5
	#define mbHost20_USBCMD_AsynchronousEnable_Clr()	      (mwHost20Bit_Clr(0x10,BIT5))	//Bit 5

	#define mbHost20_USBCMD_PeriodicEnable_Rd()     	      (mwHost20Bit_Rd(0x10,BIT4) )    //Bit 4
	#define mbHost20_USBCMD_PeriodicEnable_Set()     	      (mwHost20Bit_Set(0x10,BIT4))    //Bit 4
	#define mbHost20_USBCMD_PeriodicEnable_Clr()	          (mwHost20Bit_Clr(0x10,BIT4))	//Bit 4

	#define mbHost20_USBCMD_FrameListSize_Rd()	              ((mwHost20Port(0x10)>>2)&0x00000003)	   //Bit 2~3
	//#define mbHost20_USBCMD_FrameListSize_Set(bValue)     	  ((mwHost20Port(0x10)=((mwHost20Port(0x10)&0xF3)|(((UINT8)(bValue))<<2)))	//Bit 2~3
	#define mbHost20_USBCMD_FrameListSize_Set(bValue)     	  (mwHost20Port_wr(0x10, (mwHost20Port(0x10)&0xF3)|(((UINT8)(bValue))<<2)) )	//Bit 2~3

    #define HOST20_USBCMD_FrameListSize_1024                  0x00
    #define HOST20_USBCMD_FrameListSize_512                   0x01
    #define HOST20_USBCMD_FrameListSize_256                   0x02

	#define mbHost20_USBCMD_HCReset_Rd()	                  (mwHost20Bit_Rd(0x10,BIT1))	   //Bit 1
	#define mbHost20_USBCMD_HCReset_Set()	                  (mwHost20Bit_Set(0x10,BIT1))   //Bit 1

	#define mbHost20_USBCMD_RunStop_Rd()	                  (mwHost20Bit_Rd(0x10,BIT0) )  //Bit 0
	#define mbHost20_USBCMD_RunStop_Set()	                  (mwHost20Bit_Set(0x10,BIT0))  //Bit 0
	#define mbHost20_USBCMD_RunStop_Clr()	                  (mwHost20Bit_Clr(0x10,BIT0))  //Bit 0


	#define HOST20_Enable                  0x01
	#define HOST20_Disable                 0x00




	//<5>.0x014(USBSTS - USB Status Register)
	#define mwHost20_USBSTS_Rd()		                      (mwHost20Port(0x14))
	#define mwHost20_USBSTS_Set(wValue)		                  mwHost20Port_wr(0x14,wValue)

	#define mwHost20_USBSTS_AsynchronousStatus_Rd()		      (mwHost20Bit_Rd(0x15,BIT7)) 	//14->Bit 15

	#define mwHost20_USBSTS_PeriodicStatus_Rd()		          (mwHost20Bit_Rd(0x15,BIT6)) 	//Bit 14

//	#define mwHost20_USBSTS_Reclamation_Rd()		          (mwHost20Bit_Rd(0x14,BIT13)) 	//Bit 13

//	#define mwHost20_USBSTS_HCHalted_Rd()		              (mwHost20Bit_Rd(0x14,BIT12)) 	//Bit 12

	#define mwHost20_USBSTS_IntOnAsyncAdvance_Rd()		      (mwHost20Bit_Rd(0x14,BIT5)) 	//Bit 5
	#define mwHost20_USBSTS_IntOnAsyncAdvance_Set()		      (mwHost20Bit_Set(0x14,BIT5)) 	//Bit 5

	#define mwHost20_USBSTS_SystemError_Rd()		          (mwHost20Bit_Rd(0x14,BIT4) )	//Bit 4
	#define mwHost20_USBSTS_SystemError_Set()		          (mwHost20Bit_Set(0x14,BIT4)) 	//Bit 4

	#define mwHost20_USBSTS_FrameRollover_Rd()		          (mwHost20Bit_Rd(0x14,BIT3)) 	//Bit 3
	#define mwHost20_USBSTS_FrameRollover_Set()		          (mwHost20Bit_Set(0x14,BIT3)) 	//Bit 3

	#define mwHost20_USBSTS_PortChangeDetect_Rd()		      (mwHost20Bit_Rd(0x14,BIT2)) 	//Bit 2
	#define mwHost20_USBSTS_PortChangeDetect_Set()		      (mwHost20Bit_Set(0x14,BIT2)) 	//Bit 2

	#define mwHost20_USBSTS_USBError_Rd()		              (mwHost20Bit_Rd(0x14,BIT1)) 	//Bit 1
	#define mwHost20_USBSTS_USBError_Set()		              (mwHost20Bit_Set(0x14,BIT1)) 	//Bit 1

	#define mwHost20_USBSTS_CompletionOfTransaction_Rd()	  (mwHost20Bit_Rd(0x14,BIT0)) 	//Bit 0
	#define mwHost20_USBSTS_CompletionOfTransaction_Set()	  (mwHost20Bit_Set(0x14,BIT0)) 	//Bit 0

	//<6>.0x018(USBINTR - USB Interrupt Enable Register)
	#define mwHost20_USBINTR_Rd()		                      (mwHost20Port(0x18))
	#define mwHost20_USBINTR_Set(bValue)		              mwHost20Port_wr(0x18,bValue)

	#define mwHost20_USBINTR_IntOnAsyncAdvance_Rd()		      (mwHost20Bit_Rd(0x18,BIT5) )	//Bit 5
	#define mwHost20_USBINTR_IntOnAsyncAdvance_Set()		  (mwHost20Bit_Set(0x18,BIT5)) 	//Bit 5
    #define mwHost20_USBINTR_IntOnAsyncAdvance_Clr()		  (mwHost20Bit_Clr(0x18,BIT5)) 	//Bit 5

	#define mwHost20_USBINTR_SystemError_Rd()		          (mwHost20Bit_Rd(0x18,BIT4)) 	//Bit 4
	#define mwHost20_USBINTR_SystemError_Set()		          (mwHost20Bit_Set(0x18,BIT4)) 	//Bit 4
	#define mwHost20_USBINTR_SystemError_Clr()		          (mwHost20Bit_Clr(0x18,BIT4)) 	//Bit 4

	#define mwHost20_USBINTR_FrameRollover_Rd()		          (mwHost20Bit_Rd(0x18,BIT3) )	//Bit 3
	#define mwHost20_USBINTR_FrameRollover_Set()		      (mwHost20Bit_Set(0x18,BIT3)) 	//Bit 3
	#define mwHost20_USBINTR_FrameRollover_Clr()		      (mwHost20Bit_Clr(0x18,BIT3)) 	//Bit 3

	#define mwHost20_USBINTR_PortChangeDetect_Rd()		      (mwHost20Bit_Rd(0x18,BIT2) )	//Bit 2
	#define mwHost20_USBINTR_PortChangeDetect_Set()		      (mwHost20Bit_Set(0x18,BIT2)) 	//Bit 2
	#define mwHost20_USBINTR_PortChangeDetect_Clr()		      (mwHost20Bit_Clr(0x18,BIT2)) 	//Bit 2

	#define mwHost20_USBINTR_USBError_Rd()		              (mwHost20Bit_Rd(0x18,BIT1) )	//Bit 1
	#define mwHost20_USBINTR_USBError_Set()		              (mwHost20Bit_Set(0x18,BIT1)) 	//Bit 1
	#define mwHost20_USBINTR_USBError_Clr()		              (mwHost20Bit_Clr(0x18,BIT1)) 	//Bit 1

	#define mwHost20_USBINTR_CompletionOfTransaction_Rd()	  (mwHost20Bit_Rd(0x18,BIT0) )	//Bit 0
	#define mwHost20_USBINTR_CompletionOfTransaction_Set()	  (mwHost20Bit_Set(0x18,BIT0)) 	//Bit 0
	#define mwHost20_USBINTR_CompletionOfTransaction_Clr()	  (mwHost20Bit_Clr(0x18,BIT0)) 	//Bit 0

    #define HOST20_USBINTR_IntOnAsyncAdvance                  0x20
    #define HOST20_USBINTR_SystemError                        0x10
    #define HOST20_USBINTR_FrameRollover                      0x08
    #define HOST20_USBINTR_PortChangeDetect                   0x04
    #define HOST20_USBINTR_USBError                           0x02
    #define HOST20_USBINTR_CompletionOfTransaction            0x01

	//<7>.0x01C(FRINDEX - Frame Index Register (Address = 01Ch))
	#define mwHost20_FrameIndex_Rd()		                  (mwHost20Port(0x1C)&0x1FFF) 	//Only Read Bit0~Bit12(Skip Bit 13)
	//#define mwHost20_FrameIndex14Bit_Rd()                     (mwHost20Port(0x1C)&0x00003FFF) 	//Only Read Bit0~Bit12(Skip Bit 13)
	//#define mwHost20_FrameIndex_Set(wValue)		              (mwHost20Port(0x1C)=wValue)

	//<8>.0x024(PERIODICLISTBASE - Periodic Frame List Base Address Register (Address = 024h))
	//#define mwHost20_PeriodicBaseAddr_Rd()		              (mwHost20Port(0x24))
	#define mwHost20_PeriodicBaseAddr_Set(wValue)		      USB_Write_REG32(0x24,wValue)

	//<9>.0x028(ASYNCLISTADDR - Current Asynchronous List Address Register (Address = 028h))
	//#define mwHost20_CurrentAsynchronousAddr_Rd()		      (mwHost20Port(0x28) )
	#define mwHost20_CurrentAsynchronousAddr_Set(wValue)	  USB_Write_REG32(0x28,wValue)

	//<10>.0x030(PORTSC - Port Status and Control Register(Address = 030h))
	#define mwHost20_PORTSC_Rd()		                      mwHost20Port(0x30)

//	#define mwHost20_PORTSC_LineStatus_Rd()		              ((mwHost20Port(0x30)>>10)&0x00000003)

	#define mwHost20_PORTSC_PortReset_Rd()		              mwHost20Bit_Rd(0x31,BIT0)
	#define mwHost20_PORTSC_PortReset_Set()		              mwHost20Bit_Set(0x31,BIT0)
	#define mwHost20_PORTSC_PortReset_Clr()		              mwHost20Bit_Clr(0x31,BIT0)

	#define mwHost20_PORTSC_ForceSuspend_Rd()		          mwHost20Bit_Rd(0x30,BIT7)
	#define mwHost20_PORTSC_ForceSuspend_Set()		          mwHost20Bit_Set(0x30,BIT7)

	#define mwHost20_PORTSC_ForceResume_Rd()		          mwHost20Bit_Rd(0x30,BIT6)
	#define mwHost20_PORTSC_ForceResume_Set()		          mwHost20Bit_Set(0x30,BIT6)
	#define mwHost20_PORTSC_ForceResume_Clr()		          mwHost20Bit_Clr(0x30,BIT6)

	#define mwHost20_PORTSC_EnableDisableChange_Rd()		  mwHost20Bit_Rd(0x30,BIT3)
	#define mwHost20_PORTSC_EnableDisableChange_Set()		  mwHost20Bit_Set(0x30,BIT3)

	#define mwHost20_PORTSC_EnableDisable_Rd()		          mwHost20Bit_Rd(0x30,BIT2)
	#define mwHost20_PORTSC_EnableDisable_Set()		          mwHost20Bit_Set(0x30,BIT2)
	#define mwHost20_PORTSC_EnableDisable_Clr()		          mwHost20Bit_Clr(0x30,BIT2)
	#define mwHost20_PORTSC_EnableDisable_Write_0()		          (mwHost20Port(0x30)=0x00)


	#define mwHost20_PORTSC_ConnectChange_Rd()		          mwHost20Bit_Rd(0x30,BIT1)
	#define mwHost20_PORTSC_ConnectChange_Set()		          mwHost20Bit_Set(0x30,BIT1)

	#define mwHost20_PORTSC_ConnectStatus_Rd()		          mwHost20Bit_Rd(0x30,BIT0)



	//<10>.0x034(Misc. Register(Address = 034h))
	#define mwHost20_Misc_EOF1Time_Set(bValue)		           mwHost20Port_wr(0x34, ((mwHost20Port(0x34)&0xF3)|(((U8)(bValue))<<2)) )	//Bit 2~3

	//<10>.0x034(Misc. Register(Address = 40h))
	#define mwHost20_Control_LineStatus_Rd()		       (mwHost20Port(0x40)& BIT11)
	#define mwHost20_Control_LineStatus_Set()	           (mwHost20Bit_Set(0x40,BIT11))
	#define mwHost20_Control_LineStatus_Clr()	           (mwHost20Bit_Clr(0x40,BIT11))

	#define mwOTG20_Control_HOST_SPD_TYP_Rd()		          ((mwHost20Port(0x41)>>1)&0x03)

	#define mwHost20_Control_ForceFullSpeed_Rd()		       (mwHost20Port(0x40)& BIT7)
	#define mwHost20_Control_ForceFullSpeed_Set()	           (mwHost20Bit_Set(0x40,BIT7))
	#define mwHost20_Control_ForceFullSpeed_Clr()	           (mwHost20Bit_Clr(0x40,BIT7))

	#define mwHost20_Control_ForceHighSpeed_Rd()		       (mwHost20Port(0x40)& BIT6)
	#define mwHost20_Control_ForceHighSpeed_Set()	           (mwHost20Bit_Set(0x40,BIT6))
	#define mwHost20_Control_ForceHighSpeed_Clr()	           (mwHost20Bit_Clr(0x40,BIT6))

	#define mwOTG20_Control_Phy_Reset_Set()		               (mwHost20Bit_Set(0x40,BIT5))
	#define mwOTG20_Control_Phy_Reset_Clr()		               (mwHost20Bit_Clr(0x40,BIT5))

       #define mwOTG20_Control_Half_Speed()                                 (mwHost20Bit_Set(0x40,BIT2))

//	#define mwHost20_Control_711MA_FS_Issue_Solve()	            (mwHost20Bit_Set(0x40,BIT12)) //0x40 Bit-12

#ifndef VA2PA
  #if defined(CPU_TYPE_ARM)
  #define VA2PA(addr)         MsOS_VA2PA((U32)addr)
  #else
  #define VA2PA(addr)         ((void *)(((U32)addr) & 0x1fffffff))
  #endif
#endif

#if defined(CPU_TYPE_ARM)
#define  VirtoPhyAddr(x)            MsOS_VA2PA((U32)x)
#define  PhytoVirAddr(x)            MsOS_PA2KSEG1((U32)x)
#define  PhytoCacheAddr(x)            MsOS_PA2KSEG0((U32)x)
#else
#define  VirtoPhyAddr(x)            (x)
#define  PhytoVirAddr(x)            (x)
#define  PhytoCacheAddr(x)        (x)
#endif

#define flib_Host20_Allocate_QHD_Macro(x,y,z,w,u,v)                 \
   {  x->bType=y;                                       \
       x->bDeviceAddress=z;                         \
       x->bHeadOfReclamationListFlag=w;         \
       x->bEdNumber=u;                                 \
       x->bMaxPacketSize=v;          }
#if 0
#define flib_Host20_Allocate_QHD(x,y,z,w,u,v)                           \
{                                                                                                     \
    flib_Host20_Allocate_QHD_Macro(x,y,z,w,u,v) ;                  \
    flib_Host20_Allocate_QHD1(x);  }
#endif
//=================== 3.Structure Definition =============================================================
//========================================================================================================

 //<3.1>iTD Structure Definition****************************************
#define         Host20_Preiodic_Frame_List_MAX                  256
 //<3.1>iTD Structure Definition****************************************
 typedef struct   {

     //<1>.Next_Link_Pointer Word
    U32         bTerminal:1;
    U32         bType:2;
    U32         bReserved:2;
    U32         bLinkPointer:27;
 } Periodic_Frame_List_Cell_Structure;


 typedef struct  {

     Periodic_Frame_List_Cell_Structure   sCell[Host20_Preiodic_Frame_List_MAX];

} Periodic_Frame_List_Structure;

//<3.2>qTD Structure Definition****************************************
typedef struct  _BufferPointer
{
        U8      Byte0;
        U8      Byte1;
        U8      Byte2;
        U8      Byte3;
}BufferPointer_Struct;


 typedef struct _qTD {

      U32   bTerminate:1;
      U32   bReserve_1:4;
      U32   bNextQTDPointer:27;

     //<2>.Alternate Next qTD Word
      U32   bAlternateTerminate:1;
      U32   bReserve_2:4;
      U32   bAlternateQTDPointer:27;

     //<3>.Status Word
      U32   bStatus_PingState:1;
      U32   bStatus_SplitState:1;
      U32   bStatus_MissMicroFrame:1;
      U32   bStatus_Transaction_Err:1;
      U32   bStatus_Babble:1;
      U32   bStatus_Buffer_Err:1;
      U32   bStatus_Halted:1;
      U32   bStatus_Active:1;

      U32   bPID:2;
      U32   bErrorCounter:2;
      U32   CurrentPage:3;
      U32   bInterruptOnComplete:1;
      U32   bTotalBytes:15;
      U32   bDataToggle:1;


     //<4>.Buffer Pointer Word Array
     U32   ArrayBufferPointer_Word[5];


 } qTD_Structure;
    #define HOST20_qTD_PID_OUT                  0x00
    #define HOST20_qTD_PID_IN                   0x01
    #define HOST20_qTD_PID_SETUP                0x02


    #define HOST20_qTD_STATUS_Active            0x80
    #define HOST20_qTD_STATUS_Halted            0x40
    #define HOST20_qTD_STATUS_BufferError       0x20
    #define HOST20_qTD_STATUS_Babble            0x10
    #define HOST20_qTD_STATUS_TransactionError  0x08
    #define HOST20_qTD_STATUS_MissMicroFrame    0x04
    #define HOST20_qTD_STATUS_Split             0x02
    #define HOST20_qTD_STATUS_Ping              0x01

 typedef struct _qHD {

     //<1>.Next_qHD_Pointer Word
      U32   bTerminate:1;
      U32   bType:2;
      U32   bReserve_1:2;
      U32   bNextQHDPointer:27;

     //<2>.qHD_2 Word
      U32   bDeviceAddress:7;
      U32   bInactiveOnNextTransaction:1;
      U32   bEdNumber:4;
      U32   bEdSpeed:2;
      U32   bDataToggleControl:1;
      U32   bHeadOfReclamationListFlag:1;
      U32   bMaxPacketSize:11;
      U32   bControlEdFlag:1;
      U32   bNakCounter:4;

     //<3>.qHD_3 Word
      U32   bInterruptScheduleMask:8;
      U32   bSplitTransactionMask:8;
      U32   bHubAddr:7;
      U32   bPortNumber:7;
      U32   bHighBandwidth:2;

     //<4>.Overlay_CurrentqTD
      U32   bOverlay_CurrentqTD;

     //<5>.Overlay_NextqTD
      U32   bOverlay_NextTerminate:1;
      U32   bOverlay_Reserve2:4;
      U32   bOverlay_NextqTD:27;

     //<6>.Overlay_AlternateNextqTD
      U32   bOverlay_AlternateNextTerminate:1;
      U32   bOverlay_NanCnt:4;
      U32   bOverlay_AlternateqTD:27;

     //<7>.Overlay_TotalBytes
      U32   bOverlay_Status:8;
      U32   bOverlay_PID:2;
      U32   bOverlay_ErrorCounter:2;
      U32   bOverlay_C_Page:3;
      U32   bOverlay_InterruptOnComplete:1;
      U32   bOverlay_TotalBytes:15;
      U32   bOverlay_Direction:1;

     //<8>.Overlay_BufferPointer0
      U32   bOverlay_CurrentOffset:12;
      U32   bOverlay_BufferPointer_0:20;

     //<9>.Overlay_BufferPointer1
      U32   bOverlay_C_Prog_Mask:8;
      U32   bOverlay_Reserve3:4;
      U32   bOverlay_BufferPointer_1:20;

     //<10>.Overlay_BufferPointer2
      U32   bOverlay_FrameTag:5;
      U32   bOverlay_S_Bytes:7;
      U32   bOverlay_BufferPointer_2:20;

     //<11>.Overlay_BufferPointer3
      U32   bOverlay_Reserve4:12;
      U32   bOverlay_BufferPointer_3:20;

     //<12>.Overlay_BufferPointer4
      U32   bOverlay_Reserve5:12;
      U32   bOverlay_BufferPointer_4:20;

 } qHD_Structure;


    #define HOST20_HD_Type_iTD                  0x00
    #define HOST20_HD_Type_QH                   0x01
    #define HOST20_HD_Type_siTD                 0x02
    #define HOST20_HD_Type_FSTN                 0x03

//<3.4>.Test Condition Definition****************************************


 typedef struct {

      UINT8   bStructureEnable; //Enable = 0x66  Disable=>Others
      UINT8   bInterruptThreshod;  //01,02,04,08,10,20,40
      UINT8   bAsynchronousParkMode; //00=>Disable,01=>Enable
      UINT8   bAsynchronousParkModeCounter; //01,02,03
      UINT8   bFrameSize; //00,01,02

 } Host20_Init_Condition_Structure;


    #define HOST20_FrameSize_1024                  0x00
    #define HOST20_FrameSize_512                   0x01
    #define HOST20_FrameSize_256                   0x02


//<3.5>.Host20's Attach Device Info Structure****************************************

//OTGHost Device Structure
 typedef struct
 {
	UINT8 bDEVICE_LENGTH;					// bLength
	UINT8 bDT_DEVICE;						// bDescriptorType
	UINT8 bVerLowByte;			            // bcdUSB
	UINT8 bVerHighByte;

	UINT8 bDeviceClass;			            // bDeviceClass
	UINT8 bDeviceSubClass;			        // bDeviceSubClas;
	UINT8 bDeviceProtocol;			        // bDeviceProtocol
	UINT8 bEP0MAXPACKETSIZE;				// bMaxPacketSize0

	UINT8 bVIDLowByte;			            // idVendor
	UINT8 bVIDHighByte;
	UINT8 bPIDLowByte;			            // idProduct
	UINT8 bPIDHighByte;
	UINT8 bRNumLowByte;	                    // bcdDeviceReleaseNumber
	UINT8 bRNumHighByte;

	UINT8 bManufacturer;			        // iManufacturer
	UINT8 bProduct;				            // iProduct
	UINT8 bSerialNumber; 			        // iSerialNumber
	UINT8 bCONFIGURATION_NUMBER;			// bNumConfigurations
 }OTGH_Descriptor_Device_Struct;


//<3.6>.OTGHost Configuration Structure => Only Support 2 Configuration / 5 Interface / 1 Class / 5 Endpoint /1 OTG

    #define  HOST20_CONFIGURATION_NUM_MAX 0X02
    #define  HOST20_INTERFACE_NUM_MAX     0X05
    #define  HOST20_ENDPOINT_NUM_MAX      0X05
    #define  HOST20_CLASS_NUM_MAX         0x01


    #define  HOST20_CONFIGURATION_LENGTH  0X09
    #define  HOST20_INTERFACE_LENGTH      0X09
    #define  HOST20_ENDPOINT_LENGTHX      0X07
    #define  HOST20_CLASS_LENGTHX         0X09

 typedef struct
 {

      //<3>.Define for ED-OTG
                UINT8   bED_OTG_Length;
                UINT8   bED_OTG_bDescriptorType;
                UINT8   bED_OTG_bAttributes;


 }OTGH_Descriptor_OTG_Struct;

 typedef struct
 {
     //<3>.Define for ED-1
                UINT8   bED_Length;
                UINT8   bED_bDescriptorType;
                UINT8   bED_EndpointAddress;
                UINT8   bED_bmAttributes;
                UINT8   bED_wMaxPacketSizeLowByte;
                UINT8   bED_wMaxPacketSizeHighByte;
                UINT8   bED_Interval;

 }OTGH_Descriptor_EndPoint_Struct;


 typedef struct
 {

   UINT8   bClass_LENGTH;
   UINT8   bClaNumberss;
   UINT8   bClassVerLowByte;
   UINT8   bClassVerHighByte;
   UINT8   bCityNumber;
   UINT8   bFollowDescriptorNum;
   UINT8   bReport;
   UINT8   bLengthLowByte;
   UINT8   bLengthHighByte;

 }OTGH_Descriptor_Class_Struct;






 typedef struct
 {

     //<2>.Define for Interface-1
			UINT8 bINTERFACE_LENGTH;		// bLength
			UINT8 bDT_INTERFACE;			// bDescriptorType INTERFACE
			UINT8 bInterfaceNumber;         // bInterfaceNumber
			UINT8 bAlternateSetting;	    // bAlternateSetting
			UINT8 bEP_NUMBER;			    // bNumEndpoints(excluding endpoint zero)
			UINT8 bInterfaceClass;	        // bInterfaceClass
			UINT8 bInterfaceSubClass;       // bInterfaceSubClass
			UINT8 bInterfaceProtocol;       // bInterfaceProtocol
			UINT8 bInterface;		        // iInterface

            OTGH_Descriptor_Class_Struct      sClass[HOST20_CLASS_NUM_MAX];
            OTGH_Descriptor_EndPoint_Struct   sED[HOST20_ENDPOINT_NUM_MAX];



 }OTGH_Descriptor_Interface_Struct;



 typedef struct
 {

 	UINT8  bCONFIG_LENGTH;					// bLength
	UINT8  bDT_CONFIGURATION;				// bDescriptorType CONFIGURATION
	UINT8  bTotalLengthLowByte;	            // wTotalLength, include all descriptors
	UINT8  bTotalLengthHighByte;
	UINT8  bINTERFACE_NUMBER;			    // bNumInterface
	UINT8  bConfigurationValue;				// bConfigurationValue
	UINT8  bConfiguration;			        // iConfiguration
	UINT8  bAttribute;				        // bmAttribute
	UINT8  bMaxPower;				        // iMaxPower (2mA units)

    OTGH_Descriptor_Interface_Struct        sInterface[HOST20_INTERFACE_NUM_MAX];


 }OTGH_Descriptor_Configuration_Only_Struct;



 //Support Configuration x2
 //        Interface     x5
 //        EndPoint      x5
 //        OTG           X1

 typedef struct
 {

	//<1>.Basic Information
//    UINT8                                   bDeviceOnHub;
  //  UINT8                                   bOnHubPortNumber;
	UINT8                                   bAdd;
  //  UINT8                                   bConnectStatus;
  //  UINT8                                   bPortEnableDisableStatus;
  //  UINT8                                   bSpeed;  //0=>Low Speed / 1=>Full Speed / 2 => High Speed
  //  UINT8                                   bPortReset;
  //  UINT8                                   bSuspend;
 //   volatile UINT8                          bRemoteWakeUpDetected;
  //  UINT8                                   bSendOK;
    UINT8                                   bSendStatusError;


   // qTD_Structure                           *psSendLastqTD;
    UINT16                                   bDataBuffer;
	//<2>.Descriptor Information
    OTGH_Descriptor_Device_Struct            sDD;
    OTGH_Descriptor_Configuration_Only_Struct   saCD[HOST20_CONFIGURATION_NUM_MAX];
    OTGH_Descriptor_OTG_Struct              sOTG;

 //   UINT8                                   bReportDescriptor[0x74];
    UINT8                                   bStringLanguage[10];
    UINT8                                   bStringManufacture[64];
    UINT8                                   bStringProduct[64];
   // UINT8                                   bStringSerialN[0xFF];
    //<3>.For ISO Information
   // UINT8                                   bISOTransferEnable;
   // UINT32                                  wISOiTDAddress[1024];

 }Host20_Attach_Device_Structure;

    #define HOST20_Attach_Device_Speed_Full                  0x00
    #define HOST20_Attach_Device_Speed_Low                   0x01
    #define HOST20_Attach_Device_Speed_High                  0x02

 //<3.7>.Control Command Structure
 typedef struct {

      UINT8   bmRequestType; //(In/Out),(Standard...),(Device/Interface...)
      UINT8   bRequest;      //GetStatus .....
      UINT8   wValueLow;     //Byte2
      UINT8   wValueHigh;    //Byte3
      UINT8   wIndexLow;     //Byte4
      UINT8   wIndexHigh;    //Byte5
      UINT8   wLengthLow;    //Byte6
      UINT8   wLengthHigh;   //Byte7


 } Host20_Control_Command_Structure;

  #define HOST20_CONTROL_GetStatus             0x00
  #define HOST20_CONTROL_ClearFeature          0x01
  #define HOST20_CONTROL_SetFeature            0x03
  #define HOST20_CONTROL_SetAddress            0x05
  #define HOST20_CONTROL_GetDescriptor         0x06
  #define HOST20_CONTROL_SetDescriptor         0x07
  #define HOST20_CONTROL_GetConfiguration      0x08
  #define HOST20_CONTROL_GetInterface          0x0A
  #define HOST20_CONTROL_SetInterface          0x0B
  #define HOST20_CONTROL_SyncFrame             0x0C


  #define HOST20_HID_GetReport                 0x01
  #define HOST20_HID_GetIdle                   0x02
  #define HOST20_HID_GetProtocol               0x03
  #define HOST20_HID_SetReport                 0x09
  #define HOST20_HID_SetIdle                   0x0A
  #define HOST20_HID_SetProtocol               0x0B


 //<3.8>.BufferPointerArray
  typedef struct {
      UINT32   BufferPointerArray[8];
 } Host20_BufferPointerArray_Structure;





//=================== 4.Extern Function Definition =======================================================
//========================================================================================================

  extern BOOLEAN flib_OTGH_Init(UINT8 wForDevice_B);
  extern U8 flib_Host20_Close(void);
 extern BOOLEAN USB_Hub_Handle(U8 port)	;
extern U8 Usb_Hub_Port_Num(void);

  //extern UINT8 flib_Host20_ISR(void);
  extern UINT8 flib_Host20_PortBusReset(void);
  extern void flib_Host20_Suspend(void);
  extern UINT8 flib_Host20_Issue_Control (UINT8 bEdNum,UINT8* pbCmd,UINT16 hwDataSize,UINT8* pbData);
  extern UINT8  flib_Host20_Issue_Bulk(UINT8 bArrayListNum,UINT16 hwSize,UINT32,UINT8 bDirection);
  extern UINT8 flib_Host20_Enumerate (UINT8 bNormalEnumerate,UINT8 bAddress);
  extern UINT8 _flib_Host20_Enumerate (UINT8 bNormalEnumerate,UINT8 bAddress);
  extern UINT8 flib_Host20_Issue_Control_CBI (UINT8* pbCmd,UINT16 hwDataSize,UINT8* pbData);

  extern void flib_DumpDeviceDescriptor (OTGH_Descriptor_Device_Struct *sDevice);
  extern void flib_PrintDeviceInfo (void);
  extern   void flib_PrintDeviceInfo_ByInput (Host20_Attach_Device_Structure *psAttachDevice);
  extern void flib_Host20_TimerISR(void);
//  extern void flib_Host20_TimerEnable(UINT32 wTime_ms);
  extern void flib_Host20_InitStructure(void);
  extern qTD_Structure *flib_Host20_GetStructure(UINT8 Type);
extern void flib_Host20_ReleaseStructure(U8 Type,U32 pwAddress);
extern void flib_Host20_QHD_Control_Init(void);
extern UINT8 flib_Host20_Send_qTD(qTD_Structure *spHeadqTD ,qHD_Structure *spTempqHD,U16 wTimeOutSec);
extern void flib_Host20_Allocate_QHD(qHD_Structure  *psQHTemp,UINT8 bNextType,UINT8 bAddress,UINT8 bHead,UINT8 bEndPt, UINT32 wMaxPacketSize);

  extern UINT8 flib_Host20_Issue_Control_Turbo (UINT8 bEdNum,UINT8* pbCmd,UINT32 wDataSize,UINT32 *pwPageAddress,UINT32 wCurrentOffset);
  extern void flib_Host20_Control_Command_Request(Host20_Control_Command_Structure *pbCMD,UINT8 bmRequestType_Temp,UINT8 bRequest_Temp,UINT16 wValue_Temp,UINT16 wIndex_Temp,UINT16 wLength_Temp);
  extern void flib_DumpString (UINT8 *pbTemp,UINT8 bSize);
  extern void  flib_Host20_Interrupt_Init(UINT8 bAddr);
  extern U8  flib_Host20_Issue_Interrupt(U32 buf,U32 hwSize);

  extern void flib_Host20_Asynchronous_Enable(void);
  extern void flib_Host20_Asynchronous_Disable(void);

  extern   UINT8 flib_OTGH_Checking_RemoteWakeUp(void);
  extern  UINT8 flib_OTGH_RemoteWakeEnable(void);
   extern void flib_Host20_StopRun_Setting(UINT8 bOption);
// extern void flib_Host20_Asynchronous_Setting(UINT8 bOption);
  extern void flib_Host20_Periodic_Setting(UINT8 bOption);
//   extern void flib_Host20_TimerEnable_UnLock(UINT32 wTime_Tick);
//   extern void flib_Host20_TimerDisable_UnLock(void);

   extern void flib_Host20_RemoteWakeUp_Processing(void);

  //  extern void SetPointer(UINT16 addr, UINT32 val);
  //  extern void SetValue(UINT16 addr,  UINT8 StartBit, UINT8 BitNum, UINT8 val);
void FillBufferArray(qTD_Structure xdata  *spTempqTD,UINT16        bpDataPage);
//void SetPointer( qHD_Structure  xdata *qhd, UINT32 val);
qTD_Structure  *GetPointer(UINT8*  ptr);
void SetPointer( UINT8 *ptr, UINT32 val);


//=================== 5.Call Extern Function Definition =======================================================
//========================================================================================================

extern void flib_Debug_LED_Init(void);
extern void flib_Debug_LED_On_All(void);
extern void flib_Debug_LED_Off_All(void);


//=================== 6.Extern Variable Definition =======================================================
//========================================================================================================

 extern  code UINT8 OTGH_GETDESCRIPTOR_DEVICE[];
 extern  code UINT8 OTGH_GETDESCRIPTOR_CONFIG[];
 extern  code UINT8 OTGH_SETADDRESS[];
 extern  code  UINT8 OTGH_SETCONFIGURATION[];
 extern  code  UINT8 OTGH_GETDESCRIPTOR_OTG[];
 extern  code UINT8 OTGH_SET_FEATURE_OTG[];
 extern  code UINT8 OTGH_SETDESCRIPTOR_DEVICE[];
 extern  code UINT8 OTGH_GETDESCRIPTOR_STR70[];
 extern  code UINT8 OTGH_SETDESCRIPTOR_STR70[];
 extern  code UINT8 OTGH_GETDESCRIPTOR_STR80[];
 extern  code UINT8 OTGH_SETDESCRIPTOR_STR80[];
 extern  code UINT8 waIntervalMap[];
  // extern volatile UINT32 wOTG_Timer_Counter;
//   extern qHD_Structure     *psHost20_qHD_List_Control[3];
//   extern qHD_Structure     *psHost20_qHD_List_Bulk[3];
#if 0
extern  qHD_Structure xdata Host20_qHD_List_Control0;
extern  qHD_Structure xdata Host20_qHD_List_Bulk0;
extern  qHD_Structure xdata Host20_qHD_List_Control1;
extern  qHD_Structure xdata Host20_qHD_List_Bulk1;
#endif
extern  qHD_Structure *pHost20_qHD_List_Control0;
extern  qHD_Structure *pHost20_qHD_List_Bulk0;
extern  qHD_Structure *pHost20_qHD_List_Control1;
extern  qHD_Structure *pHost20_qHD_List_Bulk1;

   extern UINT8             Host20_qTD_Manage[Host20_qTD_MAX];  //1=>Free 2=>used
//   extern UINT8             Host20_iTD_Manage[Host20_iTD_MAX];  //1=>Free 2=>used
   //extern UINT8             Host20_DataPage_Manage[Host20_Page_MAX];  //1=>Free 2=>used

   extern Host20_Init_Condition_Structure sInitCondition;
   extern  Host20_Attach_Device_Structure xdata sAttachDevice;
   extern volatile UINT32 wOTG_Timer_Counter;
//   extern Periodic_Frame_List_Structure  *psHost20_FramList;
//   extern  volatile UINT32 gwLastiTDSendOK;

//   extern   Host20_ISO_FixBufferMode_Structure sISOFixBufferMode;
  // extern   UINT8 bForceSpeed;//0=>All Clear 1=>Full Speed 2=>High Speed


  extern Host20_Attach_Device_Structure *psDevice_AP;
//  extern  UINT32 Host20_STRUCTURE_qHD_BASE_ADDRESS,Host20_STRUCTURE_qTD_BASE_ADDRESS;
 //extern UINT32 Host20_STRUCTURE_Preiodic_Frame_List_BASE_ADDRESS,Host20_STRUCTURE_iTD_BASE_ADDRESS;


// Write dirty cache lines to memory and invalidate the cache entries
// for the given address range.
// Aeon2 does not have an explicit invalidate memory instruction, so use
// flush are necessary.
//#ifdef NOS_MIPS
#if defined(CPU_TYPE_MIPS) || defined(CPU_TYPE_ARM)
void mhal_dcache_flush(unsigned long u32Base, unsigned long u32Size );
#define MY_HAL_DCACHE_FLUSH mhal_dcache_flush
#else //NOS_MIPS
#ifdef __AEONR2__
  #if 0
    #define MY_HAL_DCACHE_FLUSH( _base_ , _size_ )                             \
    CYG_MACRO_START                                                     \
    U32 size_once = _size_, base_once = _base_;                  \
    U32 addr, end;                                        \
    end = base_once + ((size_once < HAL_DCACHE_SIZE) ?                  \
                       size_once : HAL_DCACHE_SIZE);                    \
    for (addr = end; addr >= base_once; addr -= HAL_DCACHE_LINE_SIZE) { \
        __asm__ __volatile__(                                           \
            "l.flush_line       0(%0), 0\n" /* way 0 */                 \
            "l.flush_line       0(%0), 1\n" /* way 1 */                 \
            "l.flush_line       0(%0), 2\n" /* way 2 */                 \
            "l.flush_line       0(%0), 3\n" /* way 3 */                 \
            "l.invalidate_line  0(%0), 0\n" /* way 0 */                 \
            "l.invalidate_line  0(%0), 1\n" /* way 1 */                 \
            "l.invalidate_line  0(%0), 2\n" /* way 2 */                 \
            "l.invalidate_line  0(%0), 3\n" /* way 3 */                 \
            : : "r"(addr)                                               \
            );                                                          \
    }                                                                   \
    __asm__ __volatile__( "l.syncwritebuffer\n" );                      \
    CYG_MACRO_END
  #else //Janus
    void mhal_dcache_flush(unsigned long u32Base, unsigned long u32Size );
    #define MY_HAL_DCACHE_FLUSH mhal_dcache_flush
  #endif
#else
#define MY_HAL_DCACHE_FLUSH( _base_ , _size_ )                             \
    CYG_MACRO_START                                                     \
    U32 size_once = _size_, base_once = _base_;                  \
    U32 addr, end;                                        \
    end = base_once + ((size_once < HAL_DCACHE_SIZE) ?                  \
                       size_once : HAL_DCACHE_SIZE);                    \
    for (addr = end; addr >= base_once; addr -= HAL_DCACHE_LINE_SIZE) { \
        __asm__ __volatile__(                                           \
            "l.flush_line       0(%0), 0\n" /* way 0 */                 \
            "l.flush_line       0(%0), 1\n" /* way 1 */                 \
            "l.invalidate_line  0(%0), 0\n" /* way 2 */                 \
            "l.invalidate_line  0(%0), 1\n" /* way 3 */                 \
            : : "r"(addr)                                               \
            );                                                          \
    }                                                                   \
    __asm__ __volatile__( "l.syncwritebuffer\n" );                      \
    CYG_MACRO_END
#endif
#endif//NOS_MIPS


#endif //LIB_HOST200__H