xref: /utopia/UTPA2-700.0.x/modules/usb/drv/usb_ecos/usbhost/drvUSBVerify.c (revision 53ee8cc121a030b8d368113ac3e966b4705770ef)

//<MStar Software>
//******************************************************************************
// MStar Software
// Copyright (c) 2010 - 2012 MStar Semiconductor, Inc. All rights reserved.
// All software, firmware and related documentation herein ("MStar Software") are
// intellectual property of MStar Semiconductor, Inc. ("MStar") and protected by
// law, including, but not limited to, copyright law and international treaties.
// Any use, modification, reproduction, retransmission, or republication of all
// or part of MStar Software is expressly prohibited, unless prior written
// permission has been granted by MStar.
//
// By accessing, browsing and/or using MStar Software, you acknowledge that you
// have read, understood, and agree, to be bound by below terms ("Terms") and to
// comply with all applicable laws and regulations:
//
// 1. MStar shall retain any and all right, ownership and interest to MStar
//    Software and any modification/derivatives thereof.
//    No right, ownership, or interest to MStar Software and any
//    modification/derivatives thereof is transferred to you under Terms.
//
// 2. You understand that MStar Software might include, incorporate or be
//    supplied together with third party`s software and the use of MStar
//    Software may require additional licenses from third parties.
//    Therefore, you hereby agree it is your sole responsibility to separately
//    obtain any and all third party right and license necessary for your use of
//    such third party`s software.
//
// 3. MStar Software and any modification/derivatives thereof shall be deemed as
//    MStar`s confidential information and you agree to keep MStar`s
//    confidential information in strictest confidence and not disclose to any
//    third party.
//
// 4. MStar Software is provided on an "AS IS" basis without warranties of any
//    kind. Any warranties are hereby expressly disclaimed by MStar, including
//    without limitation, any warranties of merchantability, non-infringement of
//    intellectual property rights, fitness for a particular purpose, error free
//    and in conformity with any international standard.  You agree to waive any
//    claim against MStar for any loss, damage, cost or expense that you may
//    incur related to your use of MStar Software.
//    In no event shall MStar be liable for any direct, indirect, incidental or
//    consequential damages, including without limitation, lost of profit or
//    revenues, lost or damage of data, and unauthorized system use.
//    You agree that this Section 4 shall still apply without being affected
//    even if MStar Software has been modified by MStar in accordance with your
//    request or instruction for your use, except otherwise agreed by both
//    parties in writing.
//
// 5. If requested, MStar may from time to time provide technical supports or
//    services in relation with MStar Software to you for your use of
//    MStar Software in conjunction with your or your customer`s product
//    ("Services").
//    You understand and agree that, except otherwise agreed by both parties in
//    writing, Services are provided on an "AS IS" basis and the warranty
//    disclaimer set forth in Section 4 above shall apply.
//
// 6. Nothing contained herein shall be construed as by implication, estoppels
//    or otherwise:
//    (a) conferring any license or right to use MStar name, trademark, service
//        mark, symbol or any other identification;
//    (b) obligating MStar or any of its affiliates to furnish any person,
//        including without limitation, you and your customers, any assistance
//        of any kind whatsoever, or any information; or
//    (c) conferring any license or right under any intellectual property right.
//
// 7. These terms shall be governed by and construed in accordance with the laws
//    of Taiwan, R.O.C., excluding its conflict of law rules.
//    Any and all dispute arising out hereof or related hereto shall be finally
//    settled by arbitration referred to the Chinese Arbitration Association,
//    Taipei in accordance with the ROC Arbitration Law and the Arbitration
//    Rules of the Association by three (3) arbitrators appointed in accordance
//    with the said Rules.
//    The place of arbitration shall be in Taipei, Taiwan and the language shall
//    be English.
//    The arbitration award shall be final and binding to both parties.
//
//******************************************************************************
//<MStar Software>
#include "MsCommon.h"
#include "drvUSB.h"
#include "drvUsbcommon.h"

#define TEST_PATTERN_NUM  4
#define VER_USB_STACK_SIZE  4096

extern BOOL ChkUsbReady(void);

void verUSB_Task(MS_U32 argc, VOID *argv)
{
    // create AppMain task
    MS_U32 i,j,k=0;
    MS_U8  run_times=0;
    MS_U8 *TXMemory,*RXMemory;
    MS_U32 persent, persent_cmp;
    MS_U8 persent_num;
    MS_BOOL bRet = FALSE;

    TXMemory=((MS_U8*)Usb_AllocateNonCachedMemory(512*4));
    RXMemory=((MS_U8*)Usb_AllocateNonCachedMemory(512*4));

    diag_printf("verUSB_Task\n");

    //prepare pattern
    for(i=0;i<4;i++)
    {
        for(j=0;j<512;j++)
        {
            *(TXMemory+(i*512)+j) = (MS_U8)(i+j);
        }
    }
    //end pattern prepare

    while(1)    // Wait for device connected
    {
        if (ChkUsbReady())
            break;

        MsOS_DelayTask(100);
    }

    diag_printf("\r\n USB Burn Test Start !!!\n");
    diag_printf("Total Block Number=0x%lx\n",  MDrv_GetUsbBlockNum(0));

    //diag_printf("gSpeed: %d\n", sAttachDevice.bSpeed);

    persent = MDrv_GetUsbBlockNum(0)/100;

    while(1)
    {
        persent_num=0;
        persent_cmp=persent;
        //for(i=0x100;i<Mass_stor_us1.Mass_stor_device[0].u32BlockTotalNum-4;/*i++*/)
        diag_printf("R/W Testing : ");
        for(i=0;i<MDrv_GetUsbBlockNum(0)-4;/*i++*/)
        {
            #if 0
            for(j=0;j<4;j++)
            {
                MDrv_UsbDiskWrite(i, 1+j, TXMemory);
                for(k=0;k<(512*(j+1));k++)
                    RXMemory[k]=0;

                MDrv_UsbDiskRead(i, 1+j, RXMemory);

                if(usbUHCICompareData(TXMemory,RXMemory, 512*(j+1)) )
                {
                    while(1)
                    {
                        diag_printf("compare fail, LBA=%lx \n", i);
                        diag_printf("run times=%x\n",run_times);
                    }
                }
            }
            #else
            bRet = MDrv_UsbBlockWriteFromMIU(0, i, TEST_PATTERN_NUM, (MS_U32)TXMemory);
            ASSERT( (bRet == TRUE) );
            //diag_printf("....write\n");
            for(k=0;k<(512*TEST_PATTERN_NUM);k++)
                RXMemory[k]=0;
            MDrv_UsbBlockReadToMIU(0, i, TEST_PATTERN_NUM, (MS_U32)RXMemory);
            ASSERT( (bRet == TRUE) );
            //diag_printf("....read\n");

            for(k=0;k<4;k++)
            {
                //diag_printf("k = %d\n", k);
                for(j=0;j<0x200;j++)
                {
                    if (RXMemory[(k*512)+j]!= TXMemory[(k*512)+j])
                    {
                        diag_printf("compare fail, [%ld]=%x \n", (k*512)+j,RXMemory[(k*512)+j]);
                        diag_printf("run times=%x\n",run_times);
                        while(1);
                    }
                }
            }
            if ((i % 100) == 0)
            {
                diag_printf("....(1) persent_cmp = %ld, i = %ld\n", persent_cmp, i);
            }
            i+=TEST_PATTERN_NUM;
            //diag_printf("....(2) persent_cmp = %d, i = %d\n", persent_cmp, i);
            if (i>persent_cmp)
            {
                persent_num++;
                diag_printf("persent_num : %d\n", persent_num);
                persent_cmp += persent;
                if ((persent_num%2)==0)
                    diag_printf("_");
            }
            #endif

            MsOS_DelayTask(100);
        }

        run_times++;
        diag_printf("\nTEST LOOP (%x) SUCESS!!\n", run_times);
    }

}

#ifndef MS_NOSAPI
void VerUSBTask_Create(void)
{
    void *pointer;

    diag_printf("VerUSB_Create\n");
    pointer = Usb_AllocateCachedMemory(VER_USB_STACK_SIZE); // 8k bytes stack size
    if( pointer == NULL)
    {
        GEN_EXCEP;
    }
    if( MsOS_CreateTask(verUSB_Task, NULL, E_TASK_PRI_HIGH,true,pointer,VER_USB_STACK_SIZE,"verUSB_TSAK") < 0 )
    {
        GEN_EXCEP;
    }
}
#endif